相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Multi-objective optimization of operating conditions of an enhanced parallel flow field proton exchange membrane fuel cell
Mehrdad Ghasabehi et al.
ENERGY CONVERSION AND MANAGEMENT (2021)
Materials, technological status, and fundamentals of PEM fuel cells - A review
Yun Wang et al.
MATERIALS TODAY (2020)
Performance evaluation of Enhanced Cross flow Split Serpentine Flow Field design for higher active area PEM fuel cells
Sheikh Abdulla et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)
Enhancing fuel transport in air-breathing microfluidic fuel cells by immersed fuel micro-jet
Yuan Zhou et al.
JOURNAL OF POWER SOURCES (2020)
Three-dimensional study of stack on the performance of the proton exchange membrane fuel cell
B. H. Lim et al.
ENERGY (2019)
Recent advances in fuel cells based propulsion systems for unmanned aerial vehicles
Z. F. Pan et al.
APPLIED ENERGY (2019)
A Rapid Thermal Nanoimprint Apparatus through Induction Heating of Nickel Mold
Xinxin Fu et al.
MICROMACHINES (2019)
Recent advances, unsolved deficiencies, and future perspectives of hydrogen fuel cells in transportation and portable sectors
Rosalin Rath et al.
INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2019)
Fabrication and Characterization of a Thin, Double-sided Air Breathing Micro Fuel Cell
S. R. Mahmoodi et al.
FUEL CELLS (2018)
Recent advances in microfluidic technologies for cell-to-cell interaction studies
Mario Rothbauer et al.
LAB ON A CHIP (2018)
Cost-effective rapid prototyping and assembly of poly(methyl methacrylate) microfluidic devices
Carlos Matellan et al.
SCIENTIFIC REPORTS (2018)
Batteries and fuel cells for emerging electric vehicle markets
Zachary P. Cano et al.
NATURE ENERGY (2018)
Flexible and Lightweight Fuel Cell with High Specific Power Density
Fandi Ning et al.
ACS NANO (2017)
Microfluidic fuel cells for energy generation
M. Safdar et al.
LAB ON A CHIP (2016)
Analysis of mechanism of Nafion® conductivity change due to hot pressing treatment
D. DeBonis et al.
RENEWABLE ENERGY (2016)
Polymer Microfluidics: Simple, Low-Cost Fabrication Process Bridging Academic Lab Research to Commercialized Production
Chia-Wen Tsao
MICROMACHINES (2016)
The optimization of air-breathing micro direct methanol fuel cell using response surface method
Zhenyu Yuan et al.
ENERGY (2015)
Model development and optimization of operating conditions to maximize PEMFC performance by response surface methodology
Homayoon Kanani et al.
ENERGY CONVERSION AND MANAGEMENT (2015)
Ultra compact direct hydrogen fuel cell prototype using a metal hydride hydrogen storage tank for a mobile phone
Sung Han Kim et al.
APPLIED ENERGY (2014)
Experimental study of hydrogen purge effects on performance and efficiency of an open-cathode Proton Exchange Membrane fuel cell system
Stephan Strahl et al.
JOURNAL OF POWER SOURCES (2014)
Air-breathing direct formic acid microfluidic fuel cell with an array of cylinder anodes
Xun Zhu et al.
JOURNAL OF POWER SOURCES (2014)
Effects of temperature on mechanical properties of SU-8 photoresist material
Soonwan Chung et al.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2013)
Optimization of Carbon Electrodes Derived from Epoxy-based Photoresist
Andrea Mardegan et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2013)
Miniaturized biological and electrochemical fuel cells: challenges and applications
Jie Yang et al.
PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2013)
A Rapid Hot-Embossing Prototyping Approach Using SU-8 Molds Coated With Metal and Antistick Coatings
Yaxi Fan et al.
JOURNAL OF MICROELECTROMECHANICAL SYSTEMS (2012)
Micro fabrication of cyclic olefin copolymer (COC) based microfluidic devices
Rajeeb K. Jena et al.
MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS (2012)
Thermoforming of Film-Based Biomedical Microdevices
Roman Truckenmuller et al.
ADVANCED MATERIALS (2011)
Fabrication of embedded microfluidic channels in low temperature co-fired ceramic technology using laser machining and progressive lamination
M. Farhan Shafique et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2011)
Uniform Shell Patterning Using Rubber-Assisted Hot Embossing Process. I. Experimental
Pratapkumar Nagarajan et al.
POLYMER ENGINEERING AND SCIENCE (2011)
Temperature-dependent structure changes in Nafion ionomer studied by PCMW2D IR correlation spectroscopy
Shigeaki Morita et al.
JOURNAL OF MOLECULAR STRUCTURE (2010)
Overview on fabrication of three-dimensional structures in multi-layer ceramic substrate
L. E. Khoong et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2010)
A novel single electrode supported direct methanol fuel cell
Alfred Lam et al.
ELECTROCHEMISTRY COMMUNICATIONS (2009)
Planar air breathing PEMFC with self-humidifying MEA and open cathode geometry design for portable applications
Narissara Bussayajarn et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2009)
An air-breathing single cell small proton exchange membrane fuel cell system with AB5-type metal hydride and an ultra-low voltage input boost converter
Azuya Akiyama et al.
JOURNAL OF POWER SOURCES (2009)
Bonding of thermoplastic polymer microfluidics
Chia-Wen Tsao et al.
MICROFLUIDICS AND NANOFLUIDICS (2009)
A novel design of a cylindrical portable direct methanol fuel cell
Ming-San Lee et al.
JOURNAL OF FUEL CELL SCIENCE AND TECHNOLOGY (2008)
Hot embossing/bonding of a poly(ethylene terephthalate) (PET) microfluidic chip
J. M. Li et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2008)
Numerical studies on an air-breathing proton exchange membrane (PEM) fuel cell
Y. Zhang et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2007)
Micro-fuel cells - Current development and applications
Arunabha Kundu et al.
JOURNAL OF POWER SOURCES (2007)
Nanoimprint lithography: Methods and material requirements
L. Jay Guo
ADVANCED MATERIALS (2007)
Overview on the challenges and developments of micro-direct methanol fuel cells (DMFC)
S. K. Kamarudin et al.
JOURNAL OF POWER SOURCES (2007)
Air cushion press for excellent uniformity, high yield, and fast nanoimprint across a 100 mm field
He Gao et al.
NANO LETTERS (2006)
Design, fabrication, and initial testing of a miniature PEM fuel cell with micro-scale pyrolyzed carbon fluidic plates
Benjamin Y. Park et al.
JOURNAL OF POWER SOURCES (2006)
Electrochemical impedance investigation of flooding in micro-flow channels for proton exchange membrane fuel cells
Suk Won Cha et al.
JOURNAL OF POWER SOURCES (2006)
A self-breathing proton-exchange-membrane fuel-cell pack with optimal design and microfabrication
Cong Chen et al.
JOURNAL OF MICROELECTROMECHANICAL SYSTEMS (2006)
The power performance curve for engineering analysis of fuel cells
JB Benziger et al.
JOURNAL OF POWER SOURCES (2006)
Impact of polymer film thickness and cavity size on polymer flow during embossing: toward process design rules for nanoimprint lithography
HD Rowland et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2005)
Bipolar plates for PEM fuel cells: A review
A Hermann et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2005)
Improved fuel utilization in microfluidic fuel cells: A computational study
A Bazylak et al.
JOURNAL OF POWER SOURCES (2005)
A PDMS micro proton exchange membrane fuel cell by conventional and non-conventional microfabrication techniques
K Shah et al.
SENSORS AND ACTUATORS B-CHEMICAL (2004)
Gas pressurized hot embossing for transcription of micro-features
JH Chang et al.
MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS (2003)
Development of portable fuel cell arrays with printed-circuit technology
R O'Hayre et al.
JOURNAL OF POWER SOURCES (2003)
Design considerations for numaturized PEM fuel cells
JP Meyers et al.
JOURNAL OF POWER SOURCES (2002)
Computational fluid dynamics modeling of proton exchange membrane fuel cells
S Um et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2000)
分享论文
