相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Dimensional accuracy, flowability, wettability, and porosity in inkjet 3DP for gypsum and cement mortar materials
Pshtiwan Shakor et al.
AUTOMATION IN CONSTRUCTION (2020)
Diffusion-induced liquid migration during thermal stabilization in presence of temperature gradients with different directions
Peng Peng
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2020)
Synthesis and characterization of copper ink and direct printing of copper patterns by inkjet printing for electronic devices
Ho Young Jun et al.
CURRENT APPLIED PHYSICS (2020)
Impact of IN718 bimodal powder size distribution on the performance and productivity of laser powder bed fusion additive manufacturing process
Seyed Amir Farzadfar et al.
POWDER TECHNOLOGY (2020)
The Microstructure Evolution and Mass Transfer in Mushy Zone during High-Pressure Solidifying Hypoeutectic Al-Ni Alloy
Xiaohong Wang et al.
APPLIED SCIENCES-BASEL (2020)
The selective laser sintering of a polyamide 11/BaTiO3/graphene ternary piezoelectric nanocomposite
Yipu Jin et al.
RSC ADVANCES (2020)
Predictive simulation of process windows for powder bed fusion additive manufacturing: Influence of the powder size distribution
Alexander M. Rausch et al.
COMPUTERS & MATHEMATICS WITH APPLICATIONS (2019)
Applications of excipients in the field of 3D printed pharmaceuticals
Pan Tian et al.
DRUG DEVELOPMENT AND INDUSTRIAL PHARMACY (2019)
Colloidal Materials for 3D Printing
Cheng Zhu et al.
Annual Review of Chemical and Biomolecular Engineering (2019)
Comparison of Linear and 4-Arm Star Poly(vinyl pyrrolidone) for Aqueous Binder Jetting Additive Manufacturing of Personalized Dosage Tablets
Emily M. Wilts et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
Laser-Based Additive Manufacturing Technologies for Aerospace Applications
Nick Tepylo et al.
ADVANCED ENGINEERING MATERIALS (2019)
Selective laser melting of reduced graphene oxide/S136 metal matrix composites with tailored microstructures and mechanical properties
Shifeng Wen et al.
MATERIALS & DESIGN (2019)
Design of highly stabilized nanocomposite inks based on biodegradable polymer-matrix and gold nanoparticles for Inkjet Printing
Belen Begines et al.
SCIENTIFIC REPORTS (2019)
Additive Manufacturing of Personalized Pharmaceutical Dosage Forms via Stereolithography
Andrew Healy et al.
PHARMACEUTICS (2019)
Recyclability of stainless steel (316 L) powder within the additive manufacturing process
Nima E. Gorji et al.
MATERIALIA (2019)
Additive manufacturing of carbon nanotube-photopolymer composite radar absorbing materials
Yuanyuan Zhang et al.
POLYMER COMPOSITES (2018)
Fabrication and characterization of 3D printed BaTiO3/PVDF nanocomposites
Hoejin Kim et al.
JOURNAL OF COMPOSITE MATERIALS (2018)
State-of-the-art of 3D printing technology of cementitious material-An emerging technique for construction
GuoWei Ma et al.
SCIENCE CHINA-TECHNOLOGICAL SCIENCES (2018)
3D Printing Sulfur Copolymer-Graphene Architectures for Li-S Batteries
Kai Shen et al.
ADVANCED ENERGY MATERIALS (2018)
Influence of Geometry on the Drug Release Profiles of Stereolithographic (SLA) 3D-Printed Tablets
Pamela Robles Martinez et al.
AAPS PHARMSCITECH (2018)
Development of Graphene Oxide/Polyaniline Inks for High Performance Flexible Microsupercapacitors via Extrusion Printing
Yuqing Liu et al.
ADVANCED FUNCTIONAL MATERIALS (2018)
3D printing using concrete extrusion: A roadmap for research
R. A. Buswell et al.
CEMENT AND CONCRETE RESEARCH (2018)
Experimental study on mix proportion and fresh properties of fly ash based geopolymer for 3D concrete printing
Biranchi Panda et al.
CERAMICS INTERNATIONAL (2018)
The influence of nanostructure on the mechanical properties of 3D printed polylactide/nanoclay composites
Antigoni Paspali et al.
COMPOSITES PART B-ENGINEERING (2018)
3D extrusion printing of high drug loading immediate release paracetamol tablets
Shaban A. Khaled et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2018)
3D printing of drug-loaded gyroid lattices using selective laser sintering
Fabrizio Fina et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2018)
Experimental analysis of spatter generation and melt-pool behavior during the powder bed laser beam melting process
V. Gunenthiram et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)
Investigation into the processability, recyclability and crystalline structure of selective laser sintered Polyamide 6 in comparison with Polyamide 12
Peng Chen et al.
POLYMER TESTING (2018)
3D Printing of Silk Particle-Reinforced Chitosan Hydrogel Structures and Their Properties
Jun Zhang et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2018)
3D Printing of Silk Particle-Reinforced Chitosan Hydrogel Structures and Their Properties
Jun Zhang et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2018)
3D Printing of Highly Stretchable Strain Sensors Based on Carbon Nanotube Nanocomposites
Mohammad Abshirini et al.
ADVANCED ENGINEERING MATERIALS (2018)
3D Printing of PLA/clay Nanocomposites: Influence of Printing Temperature on Printed Samples Properties
Bartolomeo Coppola et al.
MATERIALS (2018)
Polyvinyl alcohol reinforced with crystalline nanocellulose for 3D printing application
A. Cataldi et al.
MATERIALS TODAY COMMUNICATIONS (2018)
3D Printing of Calcium Phosphate Ceramics for Bone Tissue Engineering and Drug Delivery
Ryan Trombetta et al.
ANNALS OF BIOMEDICAL ENGINEERING (2017)
Alginate Sulfate-Nanocellulose Bioinks for Cartilage Bioprinting Applications
Michael Mueller et al.
ANNALS OF BIOMEDICAL ENGINEERING (2017)
3D Printed Polycaprolactone Carbon Nanotube Composite Scaffolds for Cardiac Tissue Engineering
Chee Meng Benjamin Ho et al.
MACROMOLECULAR BIOSCIENCE (2017)
Preparation of 3D printable micro/nanocellulose-polylactic acid (MNC/PLA) composite wire rods with high MNC constitution
Zhiguo Wang et al.
INDUSTRIAL CROPS AND PRODUCTS (2017)
3D printing of tablets using inkjet with UV photoinitiation
Elizabeth A. Clark et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2017)
Effect of Particle Size Distribution on Powder Packing and Sintering in Binder Jetting Additive Manufacturing of Metals
Yun Bai et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2017)
Influence of Powder Characteristics on Formation of Porosity in Additive Manufacturing of Ti-6Al-4V Components
Maurizio Iebba et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2017)
On microstructure and mechanical properties of additively manufactured AlSi10Mg_200C using recycled powder
Hamed Asgari et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
3D printing of high-strength aluminium alloys
John H. Martin et al.
NATURE (2017)
3D printing of multiaxial force sensors using carbon nanotube (CNT)/thermoplastic polyurethane (TPU) filaments
Kyuyoung Kim et al.
SENSORS AND ACTUATORS A-PHYSICAL (2017)
Influence of additive multilayer feature on thermodynamics, stress and microstructure development during laser 3D printing of aluminum-based material
Donghua Dai et al.
SCIENCE BULLETIN (2017)
3D Printed Graphene Based Energy Storage Devices
Christopher W. Foster et al.
SCIENTIFIC REPORTS (2017)
Thermo-mechanical improvement of Inconel 718 using ex situ boron nitride-reinforced composites processed by laser powder bed fusion
Sang Hoon Kim et al.
SCIENTIFIC REPORTS (2017)
3D printed polymer dielectric substrates with enhanced permittivity by nanoclay inclusion
Vishal Francis et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2017)
3D printing trends in building and construction industry: a review
Yi Wei Daniel Tay et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2017)
A new chapter in pharmaceutical manufacturing: 3D-printed drug products
James Norman et al.
ADVANCED DRUG DELIVERY REVIEWS (2017)
Shear-Thinning and Thermo-Reversible Nanoengineered Inks for 3D Bioprinting
Scott A. Wilson et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
Hydroxypropyl methylcellulose-based controlled release dosage by melt extrusion and 3D printing: Structure and drug release correlation
Jiaxiang Zhang et al.
CARBOHYDRATE POLYMERS (2017)
Electrically conductive filament for 3D-printed circuits and sensors
Sen Wai Kwok et al.
APPLIED MATERIALS TODAY (2017)
3D printing of CNT-and graphene-based conductive polymer nanocomposites by fused deposition modeling
K. Gnanasekaran et al.
APPLIED MATERIALS TODAY (2017)
Highly Elastic, Transparent, and Conductive 3D-Printed Ionic Composite Hydrogels
Jeremy Odent et al.
ADVANCED FUNCTIONAL MATERIALS (2017)
3D Printed Stretchable Tactile Sensors
Shuang-Zhuang Guo et al.
ADVANCED MATERIALS (2017)
One-Step Solvent Evaporation-Assisted 3D Printing of Piezoelectric PVDF Nanocomposite Structures
Sampada Bodkhe et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
Fundamentals and applications of 3D printing for novel materials
Jian-Yuan Lee et al.
APPLIED MATERIALS TODAY (2017)
Additive Manufacturing Processes: Selective Laser Melting, Electron Beam Melting and Binder JettingSelection Guidelines
Prashanth Konda Gokuldoss et al.
MATERIALS (2017)
High-Strength Stereolithographic 3D Printed Nanocomposites: Graphene Oxide Metastability
Jill Z. Manapat et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
Cellulose Nanocrystal Inks for 3D Printing of Textured Cellular Architectures
Gilberto Siqueira et al.
ADVANCED FUNCTIONAL MATERIALS (2017)
Biomimetic Anisotropic Reinforcement Architectures by Electrically Assisted Nanocomposite 3D Printing
Yang Yang et al.
ADVANCED MATERIALS (2017)
3D printing of polymer matrix composites: A review and prospective
Xin Wang et al.
COMPOSITES PART B-ENGINEERING (2017)
Recyclability Study on Inconel 718 and Ti-6Al-4V Powders for Use in Electron Beam Melting
Peeyush Nandwana et al.
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2016)
Laser powder-bed fusion additive manufacturing: Physics of complex melt flow and formation mechanisms of pores, spatter, and denudation zones
Saad A. Khairallah et al.
ACTA MATERIALIA (2016)
Graphene Oxide-Based Electrode Inks for 3D-Printed Lithium-Ion Batteries
Kun Fu et al.
ADVANCED MATERIALS (2016)
Interface and performance of 3D printed continuous carbon fiber reinforced PLA composites
Xiaoyong Tian et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)
Fabrication of highly conductive graphene flexible circuits by 3D printing
Di Zhang et al.
SYNTHETIC METALS (2016)
Mechanical and thermal properties of ABS/montmorillonite nanocomposites for fused deposition modeling 3D printing
Zixiang Weng et al.
MATERIALS & DESIGN (2016)
Large-scale 3D printing of ultra-high performance concrete - a new processing route for architects and builders
C. Gosselin et al.
MATERIALS & DESIGN (2016)
Microwave dielectric characterisation of 3D-printed BaTiO3/ABS polymer composites
F. Castles et al.
SCIENTIFIC REPORTS (2016)
3D-Printed Artificial Microfish
Wei Zhu et al.
ADVANCED MATERIALS (2015)
3D Printing of Highly Stretchable and Tough Hydrogels into Complex, Cellularized Structures
Sungmin Hong et al.
ADVANCED MATERIALS (2015)
3D Bioprinting Human Chondrocytes with Nanocellulose-Alginate Bioink for Cartilage Tissue Engineering Applications
Kajsa Markstedt et al.
BIOMACROMOLECULES (2015)
Conductive 3D microstructures by direct 3D printing of polymer/carbon nanotube nanocomposites via liquid deposition modeling
Giovanni Postiglione et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2015)
Additive manufacturing of carbon fiber reinforced thermoplastic composites using fused deposition modeling
Fuda Ning et al.
COMPOSITES PART B-ENGINEERING (2015)
An Overview of 3D Printing Technologies for Food Fabrication
Jie Sun et al.
FOOD AND BIOPROCESS TECHNOLOGY (2015)
Wire-feed additive manufacturing of metal components: technologies, developments and future interests
Donghong Ding et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2015)
3D printing of tablets containing multiple drugs with defined release profiles
Shaban A. Khaled et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2015)
Effect of Powder Reuse Times on Additive Manufacturing of Ti-6Al-4V by Selective Electron Beam Melting
H. P. Tang et al.
JOM (2015)
Mesoporous bioactive glass nanolayer-functionalized 3D-printed scaffolds for accelerating osteogenesis and angiogenesis
Yali Zhang et al.
NANOSCALE (2015)
Geometrical versus Random β-TCP Scaffolds: Exploring the Effects on Schwann Cell Growth and Behavior
Lauren Sweet et al.
PLOS ONE (2015)
An exploration of binder jetting of copper
Yun Bai et al.
RAPID PROTOTYPING JOURNAL (2015)
Continuous liquid interface production of 3D objects
John R. Tumbleston et al.
SCIENCE (2015)
Highly compressible 3D periodic graphene aerogel microlattices
Cheng Zhu et al.
NATURE COMMUNICATIONS (2015)
Multimaterial magnetically assisted 3D printing of composite materials
Dimitri Kokkinis et al.
NATURE COMMUNICATIONS (2015)
Designing bioinspired composite reinforcement architectures via 3D magnetic printing
Joshua J. Martin et al.
NATURE COMMUNICATIONS (2015)
3D Printable Graphene Composite
Xiaojun Wei et al.
SCIENTIFIC REPORTS (2015)
Lyophilized Silk Sponges: A Versatile Biomaterial Platform for Soft Tissue Engineering
Jelena Rnjak-Kovacina et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2015)
Lyophilized Silk Sponges: A Versatile Biomaterial Platform for Soft Tissue Engineering
Jelena Rnjak-Kovacina et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2015)
Additive Manufacture of Ceramics Components by Inkjet Printing
Brian Derby
ENGINEERING (2015)
Standardization in additive manufacturing: activities carried out by international organizations and projects
M. D. Monzon et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2015)
Energy consumption model of Binder-jetting additive manufacturing processes
Xin Xu et al.
INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2015)
Thermo-mechanical Characterization of Metal/Polymer Composite Filaments and Printing Parameter Study for Fused Deposition Modeling in the 3D Printing Process
Seyeon Hwang et al.
JOURNAL OF ELECTRONIC MATERIALS (2015)
Comparison of tribological behaviour for Nylon6-Al-Al2O3 and ABS parts fabricated by fused deposition modelling This paper reports a low cost composite material that is more wear-resistant than conventional ABS
Kamaljit Boparai et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2015)
3D Optical Printing of Piezoelectric Nanoparticle - Polymer Composite Materials
Kanguk Kim et al.
ACS NANO (2014)
3D-Printing of Lightweight Cellular Composites
Brett G. Compton et al.
ADVANCED MATERIALS (2014)
Highly oriented carbon fiber-polymer composites via additive manufacturing
Halil L. Tekinalp et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2014)
Desktop 3D printing of controlled release pharmaceutical bilayer tablets
Shaban A. Khaled et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2014)
Observation of keyhole-mode laser melting in laser powder-bed fusion additive manufacturing
Wayne E. King et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2014)
The importance of carbon fiber to polymer additive manufacturing
Lonnie J. Love et al.
JOURNAL OF MATERIALS RESEARCH (2014)
Fabrication of porous scaffolds by three-dimensional plotting of a pasty calcium phosphate bone cement under mild conditions
Anja Lode et al.
JOURNAL OF TISSUE ENGINEERING AND REGENERATIVE MEDICINE (2014)
Printability of calcium phosphate: Calcium sulfate powders for the application of tissue engineered bone scaffolds using the 3D printing technique
Zuoxin Zhou et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2014)
Multi-scale multi-mechanism design of tough hydrogels: building dissipation into stretchy networks
Xuanhe Zhao
SOFT MATTER (2014)
Effect of IN718 recycled powder reuse on properties of parts manufactured by means of Selective Laser Melting
L. C. Ardila et al.
8TH INTERNATIONAL CONFERENCE ON LASER ASSISTED NET SHAPE ENGINEERING (LANE 2014) (2014)
High-resolution PLA-based composite scaffolds via 3-D printing technology
T. Serra et al.
ACTA BIOMATERIALIA (2013)
25th Anniversary Article: Engineering Hydrogels for Biofabrication
Jos Malda et al.
ADVANCED MATERIALS (2013)
Injectable Polysaccharide Hydrogels Reinforced with Cellulose Nanocrystals: Morphology, Rheology, Degradation, and Cytotoxicity
Xuan Yang et al.
BIOMACROMOLECULES (2013)
Additive manufacturing (AM) and nanotechnology: promises and challenges
Olga Ivanova et al.
RAPID PROTOTYPING JOURNAL (2013)
Measuring the flowing properties of powders and grains
G. Lumay et al.
POWDER TECHNOLOGY (2012)
Shear-thinning hydrogels for biomedical applications
Murat Guvendiren et al.
SOFT MATTER (2012)
Structural and material approaches to bone tissue engineering in powder-based three-dimensional printing
A. Butscher et al.
ACTA BIOMATERIALIA (2011)
Inkjet printing ceramics: From drops to solid
B. Derby
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2011)
Thermo-mechanical properties of a highly filled polymeric composites for Fused Deposition Modeling
M. Nikzad et al.
MATERIALS & DESIGN (2011)
Estimation of Melt Pool Dimensions, Thermal Cycle, and Hardness Distribution in the Laser-Engineered Net Shaping Process of Austenitic Stainless Steel
V. D. Manvatkar et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2011)
Nano-TiO2-modified photosensitive resin for RP
Duan Yugang et al.
RAPID PROTOTYPING JOURNAL (2011)
Inkjet Printing of Functional and Structural Materials: Fluid Property Requirements, Feature Stability, and Resolution
Brian Derby
ANNUAL REVIEW OF MATERIALS RESEARCH, VOL 40 (2010)
Drop penetration time in heterogeneous powder beds
Thanh Nguyen et al.
CHEMICAL ENGINEERING SCIENCE (2009)
A review of process development steps for new material systems in three dimensional printing (3DP)
Ben Utela et al.
Journal of Manufacturing Processes (2009)
Fabrication and in vitro characterization of three-dimensional organic/inorganic scaffolds by robocasting
J. Russias et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2007)
Combining wire and coaxial powder feeding in laser direct metal deposition for rapid prototyping
Waheed Ul Haq Syed et al.
APPLIED SURFACE SCIENCE (2006)
Development of a generalized parameter window for cold spray deposition
T Schmidt et al.
ACTA MATERIALIA (2006)
Hydroxyapatite scaffolds for bone tissue engineering made by 3D printing
B Leukers et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2005)
3D fine scale ceramic components formed by ink-jet prototyping process
R Noguera et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2005)
Inkjet printing of polymers: State of the art and future developments
BJ de Gans et al.
ADVANCED MATERIALS (2004)
Modelling powder concentration distribution from a coaxial deposition nozzle for laser-based rapid tooling
AJ Pinkerton et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2004)
Metamaterials and negative refractive index
DR Smith et al.
SCIENCE (2004)
Electrophotographic printing of part and binder powders
AV Kumar et al.
RAPID PROTOTYPING JOURNAL (2004)
Development of controlled porosity polymer-ceramic composite scaffolds via fused deposition modeling
SJ Kalita et al.
MATERIALS SCIENCE & ENGINEERING C-BIOMIMETIC AND SUPRAMOLECULAR SYSTEMS (2003)
Drop penetration into porous powder beds
KP Hapgood et al.
JOURNAL OF COLLOID AND INTERFACE SCIENCE (2002)
Colloidal inks for directed assembly of 3-D periodic structures
JE Smay et al.
LANGMUIR (2002)
Direct-write assembly of ceramics from colloidal inks
JA Lewis
CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE (2002)
The design of scaffolds for use in tissue engineering. Part 1. Traditional factors
SF Yang et al.
TISSUE ENGINEERING (2001)
Computer simulations of the evolution of solidification microstructure in the LENS™ rapid fabrication process
M Grujicic et al.
APPLIED SURFACE SCIENCE (2001)
Short fiber reinforced composites for fused deposition modeling
WH Zhong et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2001)
Investigation of some phenomena occurring during continuous ink-jet printing of ceramics
BY Tay et al.
JOURNAL OF MATERIALS RESEARCH (2001)
Processing of advanced electroceramic components by fused deposition technique
M Allahverdi et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2001)
分享论文
