相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Retardation Effect of Tin Multilayer on Sn-3.0Ag-0.5Cu (SAC305)-Based Solder Joint Interface
Monalisa Char et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2020)
Effects of Ni modified MWCNTs on the microstructural evolution and shear strength of Sn-3.0Ag-0.5Cu composite solder joints
Haozhong Wang et al.
MATERIALS CHARACTERIZATION (2020)
Transient Liquid Phase Bonding of Copper using Sn Coated Cu MWCNT Composite Powders for Power Electronics
Sri Harini Rajendran et al.
APPLIED SCIENCES-BASEL (2019)
Temperature and humidity effects on microstructure and mechanical properties of an environmentally friendly Sn-Ag-Cu material
Asit Kumar Gain et al.
JOURNAL OF MATERIALS SCIENCE (2019)
Study of mechanical properties of Ag nanoparticle-modified graphene/Sn-Ag-Cu solders by nanoindentation
Y. D. Han et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
The Role of Intermetallic Compounds in Controlling the Microstructural, Physical and Mechanical Properties of Cu-[Sn-Ag-Cu-Bi]-Cu Solder Joints
Reza Sayyadi et al.
SCIENTIFIC REPORTS (2019)
Insights on interfacial IMCs growth and mechanical strength of asymmetrical Cu/SAC305/Cu-Co system
Xiaowu Hu et al.
VACUUM (2019)
Review of the wettability of solder with a wetting balance test for recent advanced microelectronic packaging
Do-Hyun Jung et al.
CRITICAL REVIEWS IN SOLID STATE AND MATERIALS SCIENCES (2019)
Reaction of Au/Pd/Cu and Au/Pd/Au/Cu multilayers with Sn-Ag-Cu alloy
Y. H. Huang et al.
SURFACE & COATINGS TECHNOLOGY (2019)
Evolution of Transient Liquid-Phase Sintered Cu-Sn Skeleton Microstructure During Thermal Aging
Hiroaki Tatsumi et al.
APPLIED SCIENCES-BASEL (2019)
Novel transient liquid phase bonding through capillary action for hightemperature power devices packaging
Huakai Shao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
The effects of TiO2 nanoparticles addition on the thermal shock resistance, shear strength and IMC layer growth of SAC305 alloy
Asit Kumar Gain et al.
MATERIALIA (2018)
Microstructure characterization and mechanical behavior for Ag3Sn joint produced by foil-based TLP bonding in air atmosphere
Huakai Shao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
A review of lead-free solders for electronics applications
Shunfeng Cheng et al.
MICROELECTRONICS RELIABILITY (2017)
Cu/SnAgCu/Cu TLP with different thicknesses for 3D IC
Liang Zhang et al.
SOLDERING & SURFACE MOUNT TECHNOLOGY (2017)
Synthesis and characterization of ceramic nanoparticles reinforced lead-free solder
Zahra Fathian et al.
CERAMICS INTERNATIONAL (2017)
Improved microstructure and mechanical properties for Sn58Bi0.7Zn solder joint by addition of graphene nanosheets
Dongliang Ma et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2016)
Microstructures and properties of new Sn-Ag-Cu lead-free solder reinforced with Ni-coated graphene nanosheets
Guang Chen et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2016)
Reactions in Electrodeposited Cu/Sn and Cu/Ni/Sn Nanoscale Multilayers for Interconnects
Pay Ying Chia et al.
MATERIALS (2016)
Microstructure and mechanical properties of Pb-free Sn-3.0Ag-0.5Cu solder pastes added with NiO nanoparticles after reflow soldering process
Srivalli Chellvarajoo et al.
MATERIALS & DESIGN (2016)
Effect of Zn Additions on the Mechanical Properties of Cu6Sn5-Based IMCs: Theoretical and Experimental Investigations
Shanxing Chen et al.
JOURNAL OF ELECTRONIC MATERIALS (2015)
Mechanical properties of intermetallic compounds in electrodeposited multilayered thin film at small scale by nanoindentation
Abu Zayed Mohammad Saliqur Rahman et al.
MATERIALS LETTERS (2015)
A comparative study of Cn/Sn/Cu and Ni/Sn/Ni solder joints for low temperature stable transient liquid phase bonding
Kunmo Chu et al.
SCRIPTA MATERIALIA (2015)
Mechanical properties of interfacial phases between Sn-3.5 Ag solder and Ni-18 at. % W barrier film by nanoindentation
C. S. Chew et al.
SOLDERING & SURFACE MOUNT TECHNOLOGY (2015)
Nanomechanical characterization of Sn-Ag-Cu/Cu joints-Part 1: Young's modulus, hardness and deformation mechanisms as a function of temperature
V. M. F. Marques et al.
ACTA MATERIALIA (2013)
Rapid formation of Cu/Cu3Sn/Cu joints using ultrasonic bonding process at ambient temperature
Mingyu Li et al.
APPLIED PHYSICS LETTERS (2013)
Graphite-to-304SS Braze Joining by Active Metal-Brazing Technique: Improvement of Mechanical Properties
Ajoy K. Ray et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2013)
Microstructure, mechanical properties, and deformation behavior of Sn-1.0Ag-0.5Cu solder after Ni and Sb additions
A. A. El-Daly et al.
MATERIALS & DESIGN (2013)
Effect of grain boundaries on the electron work function of nanocrystalline nickel
R. Kh Khisamov et al.
PHYSICS OF THE SOLID STATE (2013)
Comparison study of SAC405 and SAC4054+0.1%Al lead free solders
Roman Kolenak et al.
SOLDERING & SURFACE MOUNT TECHNOLOGY (2013)
Effect of trace Al on growth rates of intermetallic compound layers between Sn-based solders and Cu substrate
J. F. Li et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2012)
Elastic modulus, hardness and creep performance of SnBi alloys using nanoindentation
Lu Shen et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Studies and correlation among the structural, electrical and gas response properties of aerosol spray deposited self assembled nanocrystalline CuO
Iqbal Singh et al.
APPLIED SURFACE SCIENCE (2011)
Development of a Sn-Ag-Cu solder reinforced with Ni-coated carbon nanotubes
Y. D. Han et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2011)
Overview of constitutive laws, kinematics, homogenization and multiscale methods in crystal plasticity finite-element modeling: Theory, experiments, applications
F. Roters et al.
ACTA MATERIALIA (2010)
Thermomechanical behaviour of environmentally benign Pb-free solders
N. Chawla
INTERNATIONAL MATERIALS REVIEWS (2009)
Nanoindentation creep behavior of human enamel
Li-Hong He et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2009)
Aging Characteristics of Sn-Ag Eutectic Solder Alloy with the Addition of Cu, In, and Mn
M. Ghosh et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2009)
Evolution of mechanical and electrical properties of tin-lead and lead free solder to copper joint interface
Abhijit Kar et al.
MATERIALS LETTERS (2008)
Nanoindentation for measuring individual phase mechanical properties of lead free solder alloy
Yong Sun et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2008)
Factors affecting wettability and bond strength of solder joint couples
Natalia Sobczak et al.
PURE AND APPLIED CHEMISTRY (2007)
Interfacial microstructure, shear strength and electrical conductivity of Sn-3•5Ag-o•5In/Cu lead free soldered joints
A. Kar et al.
MATERIALS TECHNOLOGY (2007)
Examination of local variations in viscous, elastic, and plastic indentation responses in healing bone
Michelle L. Oyen et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2007)
Nanoindentation of lead-free solders in microelectronic packaging
C. Z. Liu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2007)
Reliability of CSP interconnections under mechanical shock loading conditions
Toni T. Mattila et al.
IEEE TRANSACTIONS ON COMPONENTS AND PACKAGING TECHNOLOGIES (2006)
Measurement of hardness and elastic modulus by instrumented indentation: Advances in understanding and refinements to methodology
WC Oliver et al.
JOURNAL OF MATERIALS RESEARCH (2004)
Measuring the mechanical properties of Pb-free solder and Sn-based intermetallics by nanoindentation
RR Chromik et al.
JOM-JOURNAL OF THE MINERALS METALS & MATERIALS SOCIETY (2003)
Scattering theory of Bardeen's formalism for tunneling:: New approach to near-field microscopy
R Carminati et al.
PHYSICAL REVIEW LETTERS (2000)
分享论文
