相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Short-range ordering and its effects on mechanical properties of high-entropy alloys
Yuan Wu et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)
Microstructure-dependent deformation behaviour of a low γ′ volume fraction Ni-base superalloy studied by in-situ neutron diffraction
Nitesh Raj Jaladurgam et al.
ACTA MATERIALIA (2020)
Control of nanoscale precipitation and elimination of intermediate-temperature embrittlement in multicomponent high-entropy alloys
T. Yang et al.
ACTA MATERIALIA (2020)
Effect of initial microstructure on the micromechanical behavior of Ti-55531 titanium alloy investigated by in-situ high-energy X-ray diffraction
Yimin Cui et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Hetero-deformation induced (HDI) hardening does not increase linearly with strain gradient
Y. F. Wang et al.
SCRIPTA MATERIALIA (2020)
High entropy alloys: A focused review of mechanical properties and deformation mechanisms
E. P. George et al.
ACTA MATERIALIA (2020)
Micro-compression studies of face-centered cubic and body-centered cubic high-entropy alloys: Size-dependent strength, strain rate sensitivity, and activation volumes
Yuan Xiao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Short-range order and its impact on the CrCoNi medium-entropy alloy
Ruopeng Zhang et al.
NATURE (2020)
Grain boundary diffusion and grain boundary structures of a Ni-Cr-Fe-alloy: Evidences for grain boundary phase transitions
Sai K. Rajeshwari et al.
ACTA MATERIALIA (2020)
A novel stress-induced martensitic transformation in a single-phase refractory high-entropy alloy
Liang Wang et al.
SCRIPTA MATERIALIA (2020)
Ultrahigh strength and ductility in newly developed materials with coherent nanolamellar architectures
Lei Fan et al.
NATURE COMMUNICATIONS (2020)
Design of D022 superlattice with superior strengthening effect in high entropy alloys
Feng He et al.
ACTA MATERIALIA (2019)
Perspective on hetero-deformation induced (HDI) hardening and back stress
Yuntian Zhu et al.
MATERIALS RESEARCH LETTERS (2019)
Segregation-driven grain boundary spinodal decomposition as a pathway for phase nucleation in a high-entropy alloy
Linlin Li et al.
ACTA MATERIALIA (2019)
Correlation of ferrite and martensite micromechanical behavior with mechanical properties of ultrafine grained dual phase steels
Amir Hossein Jahanara et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Enhanced strength and ductility in a spark plasma sintered CoCrCu0.5NiAl0.5 high-entropy alloy via a double-step ball milling approach for processing powders
Mingliang Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Tuning element distribution, structure and properties by composition in high-entropy alloys
Qingqing Ding et al.
NATURE (2019)
Phase stability of an high-entropy Al-Cr-Fe-Ni-V alloy with exceptional mechanical properties: First-principles and APT investigations
Xuan Liu et al.
COMPUTATIONAL MATERIALS SCIENCE (2019)
Outstanding tensile properties of a precipitation-strengthened FeCoNiCrTi0.2 high-entropy alloy at room and cryogenic temperatures
Y. Tong et al.
ACTA MATERIALIA (2019)
Extraordinary ductility and strain hardening of Cr26Mn20Fe20Co20Ni14 TWIP high-entropy alloy by cooperative planar slipping and twinning
Xuzhou Gao et al.
MATERIALIA (2019)
Modifying transformation pathways in high entropy alloys or complex concentrated alloys via thermo-mechanical processing
Bharat Gwalani et al.
ACTA MATERIALIA (2018)
In-situ SEM observation of phase transformation and twinning mechanisms in an interstitial high-entropy alloy
Meimei Wang et al.
ACTA MATERIALIA (2018)
Controlled formation of coherent cuboidal nanoprecipitates in body-centered cubic high-entropy alloys based on Al2(Ni,Co,Fe,Cr)14 compositions
Y. Ma et al.
ACTA MATERIALIA (2018)
Nanomechanical studies of high-entropy alloys
Yu Zou
JOURNAL OF MATERIALS RESEARCH (2018)
Development of high-strength Co-free high-entropy alloys hardened by nanosized precipitates
Y. L. Zhao et al.
SCRIPTA MATERIALIA (2018)
Phase nucleation through confined spinodal fluctuations at crystal defects evidenced in Fe-Mn alloys
A. Kwiatkowski da Silva et al.
NATURE COMMUNICATIONS (2018)
Microstructural Design for Improving Ductility of An Initially Brittle Refractory High Entropy Alloy
V. Soni et al.
SCIENTIFIC REPORTS (2018)
High-content ductile coherent nanoprecipitates achieve ultrastrong high-entropy alloys
Yao-Jian Liang et al.
NATURE COMMUNICATIONS (2018)
Coherent Precipitation and Strengthening in Compositionally Complex Alloys: A Review
Qing Wang et al.
ENTROPY (2018)
Strengthening mechanisms in high-entropy alloys: Perspectives for alloy design
Pedro E. J. Rivera-Diaz-del-Castillo et al.
JOURNAL OF MATERIALS RESEARCH (2018)
Multicomponent intermetallic nanoparticles and superb mechanical behaviors of complex alloys
T. Yang et al.
SCIENCE (2018)
Effect of coherent L12 nanoprecipitates on the tensile behavior of a fcc-based high-entropy alloy
Z. G. Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Kinetics and Grain Boundary Selectivity of Discontinuous Precipitation in Binary Ni-Cr Alloy
N. Keskar et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2017)
Insight into γ-Ni/γ′-Ni3Al interfacial energy affected by alloying elements
Xuan L. Liu et al.
MATERIALS & DESIGN (2017)
Phase stability, physical properties and strengthening mechanisms of concentrated solid solution alloys
Z. Wu et al.
CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE (2017)
Fundamental deformation behavior in high-entropy alloys: An overview
H. Y. Diao et al.
CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE (2017)
Heterogeneous precipitation behavior and stacking-fault-mediated deformation in a CoCrNi-based medium-entropy alloy
Y. L. Zhao et al.
ACTA MATERIALIA (2017)
Phase-Transformation Ductilization of Brittle High-Entropy Alloys via Metastability Engineering
Hailong Huang et al.
ADVANCED MATERIALS (2017)
Reversible deformation-induced martensitic transformation in Al0.6CoCrFeNi high-entropy alloy investigated by in situ synchrotron based high-energy X-ray diffraction
Lili Ma et al.
ACTA MATERIALIA (2017)
Spherical nanoindentation creep behavior of nanocrystalline and coarse-grained CoCrFeMnNi high-entropy alloys
Dong-Hyun Lee et al.
ACTA MATERIALIA (2016)
Strain hardening in Fe-16Mn-10Al-0.86C-5Ni high specific strength steel
M. X. Yang et al.
ACTA MATERIALIA (2016)
A precipitation-hardened high-entropy alloy with outstanding tensile properties
J. Y. He et al.
ACTA MATERIALIA (2016)
FactSage thermochemical software and databases, 2010-2016
C. W. Bale et al.
CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY (2016)
High-entropy alloy: challenges and prospects
Y. F. Ye et al.
MATERIALS TODAY (2016)
Metastable high-entropy dual-phase alloys overcome the strength-ductility trade-off
Zhiming Li et al.
NATURE (2016)
Gradient plasticity in gradient nano-grained metals
Zhi Zeng et al.
EXTREME MECHANICS LETTERS (2016)
Design of a twinning-induced plasticity high entropy alloy
Y. Deng et al.
ACTA MATERIALIA (2015)
Investigation of slip system activity in iron at room temperature by SEM and AFM in-situ tensile and compression tests of iron single crystals
P. Franciosi et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2015)
Extraordinary high ductility/strength of the interface designed bulk W-ZrC alloy plate at relatively low temperature
Z. M. Xie et al.
SCIENTIFIC REPORTS (2015)
First-principles study of interfacial boundaries in Ni-Ni3Al
C. Woodward et al.
ACTA MATERIALIA (2014)
High-temperature deformation mechanisms in a polycrystalline nickel-base superalloy studied by neutron diffraction and electron microscopy
E. M. Francis et al.
ACTA MATERIALIA (2014)
Temperature dependence of the mechanical properties of equiatomic solid solution alloys with face-centered cubic crystal structures
Z. Wu et al.
ACTA MATERIALIA (2014)
Nanoindentation deformation of a bi-phase AlCrCuFeNi2 alloy
Yuan Sun et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2014)
Magnetic effect on the interfacial energy of the Ni(111)/Cr(110) interface
Song Lu et al.
JOURNAL OF PHYSICS-CONDENSED MATTER (2014)
Effect of Cr addition on the alloying behavior, microstructure and mechanical properties of twinned CoFeNiAl0.5Ti0.5 alloy
Zhiqiang Fu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Extraordinary strain hardening by gradient structure
XiaoLei Wu et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2014)
Microstructures and properties of high-entropy alloys
Yong Zhang et al.
PROGRESS IN MATERIALS SCIENCE (2014)
The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy
F. Otto et al.
ACTA MATERIALIA (2013)
High-Energy Synchrotron X-Ray Diffraction for In Situ Study of Phase Transformation in Shape-Memory Alloys
Y. D. Wang et al.
JOM (2012)
Mechanical properties of bcc Fe-Cr alloys by first-principles simulations
Xiao-qing Li et al.
FRONTIERS OF PHYSICS (2012)
Mechanical properties of Nb25Mo25Ta25W25 and V20Nb20Mo20Ta20W20 refractory high entropy alloys
O. N. Senkov et al.
INTERMETALLICS (2011)
First-principles study of elastic properties of Cr- and Fe-rich Fe-Cr alloys
Vsevolod I. Razumovskiy et al.
PHYSICAL REVIEW B (2011)
An in situ high-energy X-ray diffraction study of micromechanical behavior of multiple phases in advanced high-strength steels
N. Jia et al.
ACTA MATERIALIA (2009)
Strengthening Materials by Engineering Coherent Internal Boundaries at the Nanoscale
K. Lu et al.
SCIENCE (2009)
Solid solution alloys of AlCoCrFeNiTix with excellent room-temperature mechanical properties
Y. J. Zhou et al.
APPLIED PHYSICS LETTERS (2007)
On the elemental effect of AlCoCrCuFeNi high-entropy alloy system
Chung-Chin Tung et al.
MATERIALS LETTERS (2007)
Microstructural development in equiatomic multicomponent alloys
B Cantor et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)
Nanostructured high-entropy alloys with multiple principal elements: Novel alloy design concepts and outcomes
JW Yeh et al.
ADVANCED ENGINEERING MATERIALS (2004)
Effect of micro segregation and dislocations on the nucleation kinetics of precipitation in aluminium alloy AA3003
SP Chen et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2003)
Geometrically necessary dislocation and size-dependent plasticity
HJ Gao et al.
SCRIPTA MATERIALIA (2003)
Modelling the kinetics of strain induced precipitation in Nb microalloyed steels
B Dutta et al.
ACTA MATERIALIA (2001)
Role of defects on microstructure development of beta titanium alloys
T Furuhara
METALS AND MATERIALS-KOREA (2000)
Plasticity at the micron scale
JW Hutchinson
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2000)