4.5 Article

Modification Approaches to Enhance Dehydration Properties of Sodium Alginate-Based Pervaporation Membranes

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Engineering, Environmental

An antifouling catechol/chitosan-modified polyvinylidene fluoride membrane for sustainable oil-in-water emulsions separation

Shanshan Zhao et al.

Summary: The study developed an underwater superoleophobic microfiltration membrane on a porous PVDF substrate using a green and simple approach, showing superior antifouling performance and stable water permeability, which can be used for sustainable O/W emulsions separation.

FRONTIERS OF ENVIRONMENTAL SCIENCE & ENGINEERING (2021)

Article Engineering, Chemical

Dehydration of C2-C4 alcohol/water mixtures via electrostatically enhanced graphene oxide laminar membranes

Song Liu et al.

Summary: This study presents electrostatically enhanced graphene oxide membranes for efficient pervaporation dehydration of alcohol/water mixtures, achieving superior performance compared to traditional membranes in terms of flux and separation factors. The assembly of graphene oxide nanosheets into ordered interlayer channels driven by electrostatic attraction shows promising potential for industrial applications in dehydration processes.

AICHE JOURNAL (2021)

Article Materials Science, Multidisciplinary

Mixed matrix membranes based on sodium alginate modified by fullerene derivatives with L-amino acids for pervaporation isopropanol dehydration

Mariia Dmitrenko et al.

Summary: The study focused on utilizing fullerene derivatives with amino acids to modify sodium alginate membranes, enhancing their performance through the use of cross-linking agents. A membrane with optimal transport properties for isopropanol dehydration was developed, demonstrating high permeation flux and constant water content in the permeate.

JOURNAL OF MATERIALS SCIENCE (2021)

Article Chemistry, Applied

Creation of highly stable porous polyacrylonitrile membranes using infrared heating

Alexey A. Yushkin et al.

Summary: Highly stable porous membranes made of commercial PAN were developed for high pressure application in aprotic solvents. IR heating treatment for 5 minutes at 170 degrees C was shown to render the PAN membranes insoluble in aprotic solvents. The study indicated that the membrane structure and properties remained unchanged after IR treatment, with adjustment of treatment time and temperature affecting the chemical stability of the membranes.

REACTIVE & FUNCTIONAL POLYMERS (2021)

Article Materials Science, Multidisciplinary

Improvement of Wear, Pitting Corrosion Resistance and Repassivation Ability of Mg-Based Alloys Using High Pressure Cold Sprayed (HPCS) Commercially Pure-Titanium Coatings

Mohammadreza Daroonparvar et al.

Summary: The study showed that the CS Ti coating exhibited better wear and corrosion resistance on Mg alloy compared to the CS Al coating and bare Mg alloy. The Ti coating significantly reduced the corrosion rate of AZ31B alloy in chloride-containing solutions and demonstrated noticeable resistance to pitting corrosion.

COATINGS (2021)

Article Materials Science, Multidisciplinary

Enhancing Thermally Modified Wood Stability against Discoloration

Dace Cirule et al.

Summary: The research revealed that adding transparent red iron oxide into non-film forming coatings is the most effective approach for enhancing the photostability of thermally modified wood against discoloration caused by weathering. By evaluating different strategies and components, it is possible to delay wood discoloration and maintain aesthetic appearance.

COATINGS (2021)

Article Materials Science, Multidisciplinary

Surface Modification of Aluminum 6061-O Alloy by Plasma Electrolytic Oxidation to Improve Corrosion Resistance Properties

Dmitry V. Dzhurinskiy et al.

Summary: This study utilized the plasma electrolytic oxidation (PEO) process to enhance the corrosion resistance properties of high-strength aluminum alloys by forming aluminum oxide coating layers. The PEO-treated aluminum alloy showed significantly higher corrosion resistance compared to the untreated substrate material, with a relationship found between the coating formation stage, process parameters, and the thickness of the oxide-formed layers impacting corrosion resistance properties. The results demonstrate promising potential for industrial applications.

COATINGS (2021)

Article Materials Science, Multidisciplinary

Galvanic Corrosion Performance of an Al-BN Abradable Seal Coating System in Chloride Solution

Bing Lei et al.

Summary: The galvanic corrosion of the porous multi-layer Al-BN abradable coating system is mainly influenced by the deposition of its corrosion products, leading to a three-stage process in chloride solution.

COATINGS (2021)

Article Materials Science, Multidisciplinary

Optimization of the Corrosion Resistance of Electroless Ni-W-P Coatings on Magnesium Alloys by the Response Surface Methodology

Bin Liu et al.

Summary: This research optimized the corrosion resistance of electroless Ni-W-P alloy-coated AZ91D magnesium alloy using response surface methodology. The study found that sodium tungstate concentration had the greatest influence on the corrosion resistance of the coating, and interactions among the variables significantly affected the corrosion resistance. The optimal technological parameters were determined to achieve the best corrosion resistance.

COATINGS (2021)

Article Materials Science, Multidisciplinary

Comparative Study of Tribomechanical Properties of HiPIMS with Positive Pulses DLC Coatings on Different Tools Steels

Adrian Claver et al.

Summary: Diamond-like carbon (DLC) coatings are known for their exceptional properties, such as excellent wear resistance and low friction coefficient. However, their adhesion is not as good as coatings deposited by other techniques, which limits their industrial applications. DLC coatings deposited using HiPIMS technology on three different tool steels showed excellent tribological properties, particularly in terms of wear resistance and adhesion.

COATINGS (2021)

Article Engineering, Chemical

Development of non-woven fabric-based ECTFE membranes for direct contact membrane distillation application

C. Ursino et al.

Summary: The study utilized a lower melting HALAR (R) Ethylene-Chlorotrifluoroethylene (LMP ECTFE) to prepare non-woven fabric-based porous membranes, examining the effects of DEG concentration and immersion time on membrane performance. Membranes exhibited stable desalination capabilities and were able to maintain original performance even after experiments, indicating potential for practical applications.

DESALINATION (2021)

Article Materials Science, Characterization & Testing

Development and characterization of sodium alginate/poly(sodium 4-styrenesulfonate) composite films for release behavior of ciprofloxacin hydrogen chloride monohydrate

M. Sohail Sarwar et al.

Summary: This study focused on preparing and characterizing drug delivery devices based on sodium alginate composite films with poly(sodium 4-styrenesulfonate). The intermolecular hydrogen bonding between the components was determined, and the films exhibited phase separation with increasing concentration of PSS. The composite films showed promising sustained drug release behavior in simulated gastric fluid compared to phosphate buffer saline solution, suggesting potential applications in wound dressing.

POLYMERS & POLYMER COMPOSITES (2021)

Article Engineering, Chemical

Facile preparation of metal-polyphenol coordination complex coated PVDF membrane for oil/water emulsion separation

Junda Wu et al.

Summary: The TA-Ti@PVDF composite membrane prepared via a facile layer-by-layer self-assembly process exhibits high separation efficiency and superior chemical stability. The properties of the membrane can be adjusted by changing the coating process, making it suitable for oily water treatment in practical complicated environments.

SEPARATION AND PURIFICATION TECHNOLOGY (2021)

Article Polymer Science

Novel Membranes Based on Hydroxyethyl Cellulose/Sodium Alginate for Pervaporation Dehydration of Isopropanol

Mariia Dmitrenko et al.

Summary: Novel membranes based on biopolymers were developed for pervaporation dehydration of isopropanol by employing surface and bulk modifications, with improvements in transport characteristics observed. The introduction of fullerenol and cross-linking agents, as well as layer-by-layer deposition of polyelectrolytes on supported membrane surface, led to enhanced permeation flux but with lower selectivity.

POLYMERS (2021)

Article Chemistry, Multidisciplinary

Surface-modified polyvinyl alcohol (PVA) membranes for pervaporation dehydration of epichlorohydrin (ECH), isopropanol (IPA), and water ternary feed mixtures

Shivshankar Chaudhari et al.

JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2020)

Article Engineering, Environmental

In situ immobilization of silver on polydopamine-coated composite membrane for enhanced antibacterial properties

Kok Poh Wai et al.

JOURNAL OF WATER PROCESS ENGINEERING (2020)

Article Engineering, Chemical

High-performance thin-film composite polyetheramide membranes for the dehydration of tetrahydrofuran

Micah Belle Marie Yap Ang et al.

JOURNAL OF MEMBRANE SCIENCE (2020)

Article Materials Science, Multidisciplinary

Corrosion Resistance of Mild Steel Coated with Phthalimide-Functionalized Polybenzoxazines

Kamal Aly et al.

COATINGS (2020)

Article Biochemistry & Molecular Biology

Polysulfone Membranes Embedded with Halloysites Nanotubes: Preparation and Properties

Nagla Kamal et al.

MEMBRANES (2020)

Article Materials Science, Multidisciplinary

Removal of Dyes and Cd2+ in Water by Kaolin/Calcium Alginate Filtration Membrane

Yujie Zhao et al.

COATINGS (2019)

Article Environmental Sciences

Novel green PVA-fullerenol mixed matrix supported membranes for separating water-THF mixtures by pervaporation

Anastasia V. Penkova et al.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2018)

Article Engineering, Chemical

The preparation of polyelectrolyte/hydrolyzed polyacrylonitrile composite hollow fiber membrane for pervaporation

Hui-An Tsai et al.

JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2018)

Article Engineering, Chemical

Enhanced pervaporation performance of SA-PFSA/ceramic hybrid membranes for ethanol dehydration

Hao-Ran Xie et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2018)

Review Engineering, Chemical

Advances in biopolymer-based membrane preparation and applications

Francesco Galiano et al.

JOURNAL OF MEMBRANE SCIENCE (2018)

Article Engineering, Chemical

Structure, morphology and separation efficiency of hybrid Alg/Fe3O4 membranes in pervaporative dehydration of ethanol

Gabriela Dudek et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2017)

Article Materials Science, Multidisciplinary

Development of Novel ECTFE Coated PP Composite Hollow-Fiber Membranes

Sergio Santoro et al.

COATINGS (2016)

Review Biochemistry & Molecular Biology

Hybrid and Mixed Matrix Membranes for Separations from Fermentations

Christopher John Davey et al.

MEMBRANES (2016)

Article Nanoscience & Nanotechnology

Molecular Composite Coatings on Nafion Using Layer-by-Layer Self-Assembly

Christophe J. Lefaux et al.

ACS APPLIED MATERIALS & INTERFACES (2015)

Article Engineering, Chemical

Metal-organic framework-based porous matrix membranes for improving mass transfer in forward osmosis membranes

Jian-Yuan Lee et al.

JOURNAL OF MEMBRANE SCIENCE (2015)

Article Engineering, Chemical

Influence of the porous support on diffusion in composite membranes

J. G. Wijmans et al.

JOURNAL OF MEMBRANE SCIENCE (2015)

Article Engineering, Chemical

Preparation of monovalent cation selective membranes through annealing treatment

Liang Ge et al.

JOURNAL OF MEMBRANE SCIENCE (2014)

Review Polymer Science

Layer-by-layer preparation of polyelectrolyte multilayer membranes for separation

Nithya Joseph et al.

POLYMER CHEMISTRY (2014)

Review Engineering, Chemical

Separation and purification of biobutanol during bioconversion of biomass

Hua-Jiang Huang et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2014)

Article Engineering, Chemical

Layer-by-Layer Deposition of Titanium Dioxide Nanoparticles on Polymeric Membranes: A Life Cycle Assessment Study

Stefano Zuin et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2013)

Article Polymer Science

Silane-modified NaA zeolite/PAAS hybrid pervaporation membranes for the dehydration of ethanol

Ping Wei et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2013)

Article Materials Science, Multidisciplinary

Plasma-treated polyethersulfone coated with crosslinked poly(vinyl alcohol): composite membranes for pervaporation dehydration of ethanol

Betina Villagra Di Carlo et al.

JOURNAL OF MATERIALS SCIENCE (2013)

Article Engineering, Chemical

Improving the stability of layer-by-layer self-assembled membranes for dehydration of alcohol and diol

Ying Zhang et al.

JOURNAL OF MEMBRANE SCIENCE (2013)

Article Engineering, Chemical

Low-Energy Distillation-Membrane Separation Process

Yu Huang et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2010)

Article Engineering, Chemical

Permeability, permeance and selectivity: A preferred way of reporting pervaporation performance data

Richard W. Baker et al.

JOURNAL OF MEMBRANE SCIENCE (2010)

Article Polymer Science

Dehydration of THF-Water Mixtures Using Zeolite-Incorporated Polymeric Membranes

J. G. Varghese et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2009)

Article Engineering, Chemical

Polyaniline membranes for the dehydration of tetrahydrofuran by pervaporation

Peter Chapman et al.

JOURNAL OF MEMBRANE SCIENCE (2008)

Review Engineering, Chemical

Membranes for the dehydration of solvents by pervaporation

Peter D. Chapman et al.

JOURNAL OF MEMBRANE SCIENCE (2008)

Article Materials Science, Multidisciplinary

Electrophoretic deposition of composite hydroxyapatite-chitosan coatings

Xin Pang et al.

MATERIALS CHARACTERIZATION (2007)

Article Energy & Fuels

Novel hybrid separation processes based on pervaporation for THF recovery

K. Koczka et al.

CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2007)

Article Engineering, Chemical

Multilayer poly(vinyl alcohol)-zeolite 4A composite membranes for ethanol dehydration by means of pervaporation

Zhen Huang et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2006)

Article Engineering, Chemical

Dehydration of tetrahydrofuran by pervaporation using a composite membrane

PD Chapman et al.

JOURNAL OF MEMBRANE SCIENCE (2006)

Article Engineering, Chemical

Zeolite-coated ceramic pervaporation membranes; Pervaporation-esterification coupling and reactor evaluation

TA Peters et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2005)

Article Polymer Science

PAN composite membrane with different solvent affinities controlled by surface modification methods

ES Dragan et al.

JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY (2005)

Article Chemistry, Physical

Sieve mechanism of microfiltration separation

S Kosvintsev et al.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2003)

Article Engineering, Biomedical

Chitosan: potential use as a bioactive coating for orthopaedic and craniofacial/dental implants

JD Bumgardner et al.

JOURNAL OF BIOMATERIALS SCIENCE-POLYMER EDITION (2003)

Article Chemistry, Physical

Ultrathin self-assembled polyelectrolyte multilayer membranes

B Tieke et al.

EUROPEAN PHYSICAL JOURNAL E (2001)

Article Engineering, Chemical

Pervaporation separation of ethyl butyrate and isopropanol with polyether block amide (PEBA) membranes

P Sampranpiboon et al.

JOURNAL OF MEMBRANE SCIENCE (2000)