相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Evaluating the environmental performance of producing soil and surfaces through industrial symbiosis
Michael Martin
JOURNAL OF INDUSTRIAL ECOLOGY (2020)
Out of sight out of mind? A life cycle-based environmental assessment of goods traded by the European Union
Sara Corrado et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Low carbon cities in 2050? GHG emissions of European cities using production-based and consumption-based emission accounting methods
Steve Harris et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Adapting Stand-Alone Renewable Energy Technologies for the Circular Economy through Eco-Design and Recycling
John Gallagher et al.
JOURNAL OF INDUSTRIAL ECOLOGY (2019)
Integrating Material Stock Dynamics Into Economy-Wide Material Flow Accounting: Concepts, Modelling, and Global Application for 1900-2050
Dominik Wiedenhofer et al.
ECOLOGICAL ECONOMICS (2019)
Reuse of electric vehicle batteries in buildings: An integrated load match analysis and life cycle assessment approach
Maria Anna Cusenza et al.
ENERGY AND BUILDINGS (2019)
Measuring the circular economy - A Multiple Correspondence Analysis of 63 metrics
Alexej Parchomenko et al.
JOURNAL OF CLEANER PRODUCTION (2019)
Life cycle assessment of industrial symbiosis: A critical review of relevant reference scenarios
Lynda Aissani et al.
JOURNAL OF INDUSTRIAL ECOLOGY (2019)
Global Circular Economy Scenario in a Multiregional Input-Output Framework
Kirsten S. Wiebe et al.
ENVIRONMENTAL SCIENCE & TECHNOLOGY (2019)
Implementation at a city level of circular economy strategies and climate change mitigation - the case of Brussels
Maarten Christis et al.
JOURNAL OF CLEANER PRODUCTION (2019)
Environmental pressure from Swedish consumption - The largest contributing producer countries, products and services
Eleonore Faure et al.
JOURNAL OF CLEANER PRODUCTION (2019)
Resource efficiency of consumables - Life cycle assessment of incontinence products
Siri Willskytt et al.
RESOURCES CONSERVATION AND RECYCLING (2019)
Resource and environmental impacts of using second-hand laptop computers: A case study of commercial reuse
Hampus Andre et al.
WASTE MANAGEMENT (2019)
Combining material flow analysis with life cycle assessment to identify environmental hotspots of urban consumption
Alexandra Lavers Westin et al.
JOURNAL OF CLEANER PRODUCTION (2019)
How to monitor environmental pressures of a circular economy: An assessment of indicators
Hanna Helander et al.
JOURNAL OF INDUSTRIAL ECOLOGY (2019)
Circular economy indicators: What do they measure?
Gustavo Moraga et al.
RESOURCES CONSERVATION AND RECYCLING (2019)
Balancing technological innovation with waste burden minimization: An examination of the global lighting industry
Rachel Dzombak et al.
WASTE MANAGEMENT (2019)
Life Cycle Assessment of Plywood Manufacturing Process in China
Liangliang Jia et al.
INTERNATIONAL JOURNAL OF ENVIRONMENTAL RESEARCH AND PUBLIC HEALTH (2019)
Consumption-based biodiversity footprints - Do different indicators yield different results?
Sandra G. Marquardt et al.
ECOLOGICAL INDICATORS (2019)
Environmental pressures from Swedish consumption - A hybrid multi-regional input-output approach
Viveka Palm et al.
JOURNAL OF CLEANER PRODUCTION (2019)
Assessment of the potential of a circular economy in open economies - Case of Belgium
Theo Geerken et al.
JOURNAL OF CLEANER PRODUCTION (2019)
A hybrid material flow analysis for quantifying multilevel anthropogenic resources
Kuang-Ly Cheng et al.
JOURNAL OF INDUSTRIAL ECOLOGY (2019)
Material Flow Analysis from Origin to Evolution
Thomas E. Graedel
ENVIRONMENTAL SCIENCE & TECHNOLOGY (2019)
Regional material flow tools to promote circular economy
M. Virtanen et al.
JOURNAL OF CLEANER PRODUCTION (2019)
A socio-ecological approach to improve industrial zones towards eco-industrial parks
Olcay Genc et al.
JOURNAL OF ENVIRONMENTAL MANAGEMENT (2019)
A circular economy use of recovered sludge cellulose in wood plastic composite production: Recycling and eco-efficiency assessment
Yonghui Zhou et al.
WASTE MANAGEMENT (2019)
A taxonomy of circular economy indicators
Michael Saidani et al.
JOURNAL OF CLEANER PRODUCTION (2019)
Coupling material circularity indicators and life cycle based indicators: A proposal to advance the assessment of circular economy strategies at the product level
Monia Niero et al.
RESOURCES CONSERVATION AND RECYCLING (2019)
Urban waste flows and their potential for a circular economy model at city-region level
Vanessa Zeller et al.
WASTE MANAGEMENT (2019)
Setting the Common Ground: A Generic Framework for Material Flow Analysis of Complex Systems
Julia Tanzer et al.
RECYCLING (2019)
Comprehensive benefit evaluation of eco-industrial parks by employing the best-worst method based on circular economy and sustainability
Haoran Zhao et al.
ENVIRONMENT DEVELOPMENT AND SUSTAINABILITY (2018)
Looking Down Under for a Circular Economy of Indium
Tim T. Werner et al.
ENVIRONMENTAL SCIENCE & TECHNOLOGY (2018)
Integrating life cycle assessment and material flow cost accounting to account for resource productivity and economic-environmental performance
Ramona Rieckhof et al.
INTERNATIONAL JOURNAL OF LIFE CYCLE ASSESSMENT (2018)
Does material circularity rhyme with environmental efficiency? Case studies on used tires
Geoffrey Lonca et al.
JOURNAL OF CLEANER PRODUCTION (2018)
Guidelines for evaluating the environmental performance of Product/Service-Systems through life cycle assessment
Louise Laumann Kjaer et al.
JOURNAL OF CLEANER PRODUCTION (2018)
The implications of stakeholder perspective for LCA of wasted food and green waste
Thomas L. Oldfield et al.
JOURNAL OF CLEANER PRODUCTION (2018)
Evaluation of Urban circular economy development: An empirical research of 40 cities in China
Ning Wang et al.
JOURNAL OF CLEANER PRODUCTION (2018)
How do scholars approach the circular economy? A systematic literature review
Roberto Merli et al.
JOURNAL OF CLEANER PRODUCTION (2018)
Is open-loop recycling the lowest preference in a circular economy? Answering through LCA of glass powder in concrete
Joris Deschamps et al.
JOURNAL OF CLEANER PRODUCTION (2018)
Pay-per-use business models as a driver for sustainable consumption: Evidence from the case of HOMIE
Nancy M. P. Bocken et al.
JOURNAL OF CLEANER PRODUCTION (2018)
EXIOBASE 3: Developing a Time Series of Detailed Environmentally Extended Multi-Regional Input-Output Tables
Konstantin Stadler et al.
JOURNAL OF INDUSTRIAL ECOLOGY (2018)
How does circular economy respond to greenhouse gas emissions reduction: An analysis of Chinese plastic recycling industries
Zhe Liu et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2018)
Quantifying the system-wide recovery potential of waste in the global paper life cycle
Stijn van Ewijk et al.
RESOURCES CONSERVATION AND RECYCLING (2018)
Tying product reuse into tying arrangements to achieve competitive advantage and environmental improvement
Mark Krystofik et al.
RESOURCES CONSERVATION AND RECYCLING (2018)
Providing an economy-wide monitoring framework for the circular economy in Austria: Status quo and challenges
Nikolai Jacobi et al.
RESOURCES CONSERVATION AND RECYCLING (2018)
Critical appraisal of the circular economy standard BS 8001:2017 and a dashboard of quantitative system indicators for its implementation in organizations
Stefan Pauliuk
RESOURCES CONSERVATION AND RECYCLING (2018)
Investigating the feasibility of a reuse scenario for textile fibres recovered from end-of-life tyres
Daniele Landi et al.
WASTE MANAGEMENT (2018)
Evaluating the Environmental Dimension of Material Efficiency Strategies Relating to the Circular Economy
Stuart Walker et al.
SUSTAINABILITY (2018)
Prospecting the sustainability implications of an emerging industrial symbiosis network
Michael Martin et al.
RESOURCES CONSERVATION AND RECYCLING (2018)
THE CHARACTERIZATION OF THE ROMANIAN CIRCULAR ECONOMY'S POTENTIAL, AT COUNTY LEVEL
Vasile Alecsandru Strat et al.
AMFITEATRU ECONOMIC (2018)
Resource Footprints are Good Proxies of Environmental Damage
Zoran J. N. Steinmann et al.
ENVIRONMENTAL SCIENCE & TECHNOLOGY (2017)
Global Resource Indicator for life cycle impact assessment: Applied in wind turbine case study
N. Adibi et al.
JOURNAL OF CLEANER PRODUCTION (2017)
Measuring circular economy strategies through index methods: A critical analysis
Valerio Elia et al.
JOURNAL OF CLEANER PRODUCTION (2017)
Comparative assessment of circular economy development in China's four megacities: The case of Beijing, Chongqing, Shanghai and Urumqi
Bin Guo et al.
JOURNAL OF CLEANER PRODUCTION (2017)
Using Life Cycle Assessment (LCA) to measure the environmental benefits of industrial symbiosis in an industrial cluster of SMEs
Tiberio Daddi et al.
JOURNAL OF CLEANER PRODUCTION (2017)
Circular Economy Rebound
Trevor Zink et al.
JOURNAL OF INDUSTRIAL ECOLOGY (2017)
Solid Waste and the Circular Economy A Global Analysis of Waste Treatment and Waste Footprints
Alexandre Tisserant et al.
JOURNAL OF INDUSTRIAL ECOLOGY (2017)
Eco-benefits assessment on urban industrial symbiosis based on material flows analysis and emergy evaluation approach: A case of Liuzhou city, China
Lu Sun et al.
RESOURCES CONSERVATION AND RECYCLING (2017)
Performance indicators for a circular economy: A case study on post-industrial plastic waste
Sofie Huysman et al.
RESOURCES CONSERVATION AND RECYCLING (2017)
Narrating expectations for the circular economy: Towards a common and contested European transition
David Lazarevic et al.
ENERGY RESEARCH & SOCIAL SCIENCE (2017)
How to Assess Product Performance in the Circular Economy? Proposed Requirements for the Design of a Circularity Measurement Framework
Michael Saidani et al.
RECYCLING (2017)
Propelling plastics into the circular economy - weeding out the toxics first
H. A. Leslie et al.
ENVIRONMENT INTERNATIONAL (2016)
How Many Environmental Impact Indicators Are Needed in the Evaluation of Product Life Cycles?
Zoran J. N. Steinmann et al.
ENVIRONMENTAL SCIENCE & TECHNOLOGY (2016)
Modelling metal flows in the Australian economy
Artem Golev et al.
JOURNAL OF CLEANER PRODUCTION (2016)
Recycling industrial residue streams into a potential new symbiosis product - The case of soil amelioration granules
Roope Husgafvel et al.
JOURNAL OF CLEANER PRODUCTION (2016)
Resource duration as a managerial indicator for Circular Economy performance
Elizabeth Franklin-Johnson et al.
JOURNAL OF CLEANER PRODUCTION (2016)
Challenges in implementing a Planetary Boundaries based Life-Cycle Impact Assessment methodology
Morten W. Ryberg et al.
JOURNAL OF CLEANER PRODUCTION (2016)
Challenges when evaluating Product/Service-Systems through Life Cycle Assessment
Louise Laumann Kjaer et al.
JOURNAL OF CLEANER PRODUCTION (2016)
A review on circular economy: the expected transition to a balanced interplay of environmental and economic systems
Patrizia Ghisellini et al.
JOURNAL OF CLEANER PRODUCTION (2016)
Circular economy: To be or not to be in a closed product loop? A Life Cycle Assessment of aluminium cans with inclusion of alloying elements
Monia Niero et al.
RESOURCES CONSERVATION AND RECYCLING (2016)
Using the planetary boundaries framework for setting impact-reduction targets in LCA contexts
Gustav Sandin et al.
INTERNATIONAL JOURNAL OF LIFE CYCLE ASSESSMENT (2015)
Quantifying the environmental performance of an industrial symbiosis network of biofuel producers
Michael Martin
JOURNAL OF CLEANER PRODUCTION (2015)
Life cycle perspective in environmental strategy development on the industry cluster level: A case study of five chemical companies
Frida Royne et al.
JOURNAL OF CLEANER PRODUCTION (2015)
Product services for a resource-efficient and circular economy - a review
Arnold Tukker
JOURNAL OF CLEANER PRODUCTION (2015)
Quantitative assessment of industrial symbiosis for the promotion of circular economy: a case study of the printed circuit boards industry in China's Suzhou New District
Zongguo Wen et al.
JOURNAL OF CLEANER PRODUCTION (2015)
Planetary boundaries: Guiding human development on a changing planet
Will Steffen et al.
SCIENCE (2015)
On the design of closed-loop networks for product life cycle management: Economic, environmental and geography considerations
Riccardo Accorsi et al.
JOURNAL OF TRANSPORT GEOGRAPHY (2015)
How Circular is the Global Economy?: An Assessment of Material Flows, Waste Production, and Recycling in the European Union and the World in 2005
Willi Haas et al.
JOURNAL OF INDUSTRIAL ECOLOGY (2015)
Mode of circular economy in China's iron and steel industry: a case study in Wu'an city
Shu-hua Ma et al.
JOURNAL OF CLEANER PRODUCTION (2014)
Establishing and testing the reuse potential indicator for managing wastes as resources
Joo Young Park et al.
JOURNAL OF ENVIRONMENTAL MANAGEMENT (2014)
A review of the circular economy in China: moving from rhetoric to implementation
Biwei Su et al.
JOURNAL OF CLEANER PRODUCTION (2013)
Measuring China's Circular Economy
Yong Geng et al.
SCIENCE (2013)
Chemical Footprint: A Methodological Framework for Bridging Life Cycle Assessment and Planetary Boundaries for Chemical Pollution
Serenella Sala et al.
INTEGRATED ENVIRONMENTAL ASSESSMENT AND MANAGEMENT (2013)
EXIOPOL - DEVELOPMENT AND ILLUSTRATIVE ANALYSES OF A DETAILED GLOBAL MR EE SUT/IOT
Arnold Tukker et al.
ECONOMIC SYSTEMS RESEARCH (2013)
Towards a national circular economy indicator system in China: an evaluation and critical analysis
Yong Geng et al.
JOURNAL OF CLEANER PRODUCTION (2012)
The Research on Quantitative Evaluation of Circular Economy Based on Waste Input-Output Analysis
Shulin Li
2011 INTERNATIONAL CONFERENCE OF ENVIRONMENTAL SCIENCE AND ENGINEERING, VOL 12, PT A (2012)
The environmental potential of reuse: an application to used books
Valerie M. Thomas
SUSTAINABILITY SCIENCE (2011)
CONSTRUCTING AN ENVIRONMENTALLY-EXTENDED MULTI-REGIONAL INPUT-OUTPUT TABLE USING THE GTAP DATABASE
Glen P. Peters et al.
ECONOMIC SYSTEMS RESEARCH (2011)
Environmental benefits from reusing clothes
Laura Farrant et al.
INTERNATIONAL JOURNAL OF LIFE CYCLE ASSESSMENT (2010)
A safe operating space for humanity
Johan Rockstrom et al.
NATURE (2009)
Preferred reporting items for systematic reviews and meta-analyses: the PRISMA statement
David Moher et al.
BMJ-BRITISH MEDICAL JOURNAL (2009)
Product-services as a research field: past, present and future. Reflections from a decade of research
Arnold Tukker et al.
JOURNAL OF CLEANER PRODUCTION (2006)