相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。High-Safety and High-Energy-Density Lithium Metal Batteries in a Novel Ionic-Liquid Electrolyte
Hao Sun et al.
ADVANCED MATERIALS (2020)
Nanopile Interlocking Separator Coating toward Uniform Li Deposition of the Li Metal Anodes
Honglei Yue et al.
ACS APPLIED MATERIALS & INTERFACES (2020)
A dendrite-eating separator for high-areal-capacity lithium-metal batteries
Xiao Chen et al.
ENERGY STORAGE MATERIALS (2020)
High-Concentration Ether Electrolytes for Stable High-Voltage Lithium Metal Batteries
Xiaodi Ren et al.
ACS ENERGY LETTERS (2019)
Pathways for practical high-energy long-cycling lithium metal batteries
Jun Liu et al.
NATURE ENERGY (2019)
Self-smoothing anode for achieving high-energy lithium metal batteries under realistic conditions
Chaojiang Niu et al.
NATURE NANOTECHNOLOGY (2019)
Mechanical behavior of electroplated mossy lithium at room temperature studied by flat punch indentation
Yikai Wang et al.
APPLIED PHYSICS LETTERS (2019)
Metal Coated Polypropylene Separator with Enhanced Surface Wettability for High Capacity Lithium Metal Batteries
Mir Mehraj Ud Din et al.
SCIENTIFIC REPORTS (2019)
Characterization and performance evaluation of lithium-ion battery separators
Marie Francine Lagadec et al.
NATURE ENERGY (2019)
Effect of nanopatterning on mechanical properties of Lithium anode
Colin Campbell et al.
SCIENTIFIC REPORTS (2018)
Stable cycling of high-voltage lithium metal batteries in ether electrolytes
Shuhong Jiao et al.
NATURE ENERGY (2018)
Tuning the Electron Density of Aromatic Solvent for Stable Solid-Electrolyte-Interphase Layer in Carbonate-Based Lithium Metal Batteries
Dong-Joo Yoo et al.
ADVANCED ENERGY MATERIALS (2018)
Mussel-Inspired Coating and Adhesion for Rechargeable Batteries: A Review
You Kyeong Jeong et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
Beyond lithium ion batteries: Higher energy density battery systems based on lithium metal anodes
Xin Shen et al.
ENERGY STORAGE MATERIALS (2018)
Extending the Life of Lithium-Based Rechargeable Batteries by Reaction of Lithium Dendrites with a Novel Silica Nanoparticle Sandwiched Separator
Kai Liu et al.
ADVANCED MATERIALS (2017)
Passivation of Lithium Metal Anode via Hybrid Ionic Liquid Electrolyte toward Stable Li Plating/Stripping
Nian-Wu Li et al.
ADVANCED SCIENCE (2017)
Study of the Mechanisms of Internal Short Circuit in a Li/Li Cell by Synchrotron X-ray Phase Contrast Tomography
Fu Sun et al.
ACS ENERGY LETTERS (2017)
Enhanced separator wettability by LiTFSI and its application for lithium metal batteries
Yong Xie et al.
JOURNAL OF MEMBRANE SCIENCE (2017)
Reviving the lithium metal anode for high-energy batteries
Dingchang Lin et al.
NATURE NANOTECHNOLOGY (2017)
Reviving Lithium-Metal Anodes for Next-Generation High-Energy Batteries
Yanpeng Guo et al.
ADVANCED MATERIALS (2017)
Dendrite-Free Lithium Deposition for Lithium Metal Anodes with Interconnected Microsphere Protection
Yong-Gun Lee et al.
CHEMISTRY OF MATERIALS (2017)
Application of Ionic Liquids to Energy Storage and Conversion Materials and Devices
Masayoshi Watanabe et al.
CHEMICAL REVIEWS (2017)
3D Porous Cu Current Collector/Li-Metal Composite Anode for Stable Lithium-Metal Batteries
Qi Li et al.
ADVANCED FUNCTIONAL MATERIALS (2017)
A water-based Al2O3 ceramic coating for polyethylene-based microporous separators for lithium-ion batteries
Hyunkyu Jeon et al.
JOURNAL OF POWER SOURCES (2016)
Stabilizing lithium metal using ionic liquids for long-lived batteries
A. Basile et al.
NATURE COMMUNICATIONS (2016)
Safer lithium metal battery based on advanced ionic liquid gel polymer nonflammable electrolytes
Qingpeng Guo et al.
RSC ADVANCES (2016)
Polymer Nanofiber-Guided Uniform Lithium Deposition for Battery Electrodes
Zheng Liang et al.
NANO LETTERS (2015)
High rate and stable cycling of lithium metal anode
Jiangfeng Qian et al.
NATURE COMMUNICATIONS (2015)
Separators for Lithium-Ion Batteries: A Review on the Production Processes and Recent Developments
Valadoula Deimede et al.
ENERGY TECHNOLOGY (2015)
Effect of a thin ceramic-coating layer on thermal and electrochemical properties of polyethylene separator for lithium-ion batteries
Chuan Shi et al.
JOURNAL OF POWER SOURCES (2014)
Detection of subsurface structures underneath dendrites formed on cycled lithium metal electrodes
Katherine J. Harry et al.
NATURE MATERIALS (2014)
Interconnected hollow carbon nanospheres for stable lithium metal anodes
Guangyuan Zheng et al.
NATURE NANOTECHNOLOGY (2014)
Ceramic composite separators coated with moisturized ZrO2 nanoparticles for improving the electrochemical performance and thermal stability of lithium ion batteries
Ki Jae Kim et al.
PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2014)
Single-ion BAB triblock copolymers as highly efficient electrolytes for lithium-metal batteries
Renaud Bouchet et al.
NATURE MATERIALS (2013)
Study of the Initial Stage of Solid Electrolyte Interphase Formation upon Chemical Reaction of Lithium Metal and N-Methyl-N-Propyl-Pyrrolidinium-Bis(Fluorosulfonyl)Imide
Akin Budi et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2012)
Resolution of the Modulus versus Adhesion Dilemma in Solid Polymer Electrolytes for Rechargeable Lithium Metal Batteries
G. M. Stone et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2012)
Li-O2 and Li-S batteries with high energy storage
Peter G. Bruce et al.
NATURE MATERIALS (2012)
Excellent Cycle Life of Lithium-Metal Anodes in Lithium-Ion Batteries with Mussel-Inspired Polydopamine-Coated Separators
Myung-Hyun Ryou et al.
ADVANCED ENERGY MATERIALS (2012)
Mussel-Inspired Polydopamine-Treated Polyethylene Separators for High-Power Li-Ion Batteries
Myung-Hyun Ryou et al.
ADVANCED MATERIALS (2011)
Synthesis of monodispersed SnO2@C composite hollow spheres for lithium ion battery anode applications
Y. Chen et al.
JOURNAL OF MATERIALS CHEMISTRY (2011)
Closely packed SiO2 nanoparticles/poly(vinylidene fluoride-hexafluoropropylene) layers-coated polyethylene separators for lithium-ion batteries
Hyun-Seok Jeong et al.
JOURNAL OF POWER SOURCES (2011)
Effect of Nanofillers Dispersion in Polymer Matrices: A Review
Monika Supova et al.
SCIENCE OF ADVANCED MATERIALS (2011)
Ionic-liquid materials for the electrochemical challenges of the future
Michel Armand et al.
NATURE MATERIALS (2009)
Effects of particle size, particle/matrix interface adhesion and particle loading on mechanical properties of particulate-polymer composites
Shao-Yun Fu et al.
COMPOSITES PART B-ENGINEERING (2008)
Effect of molecular weight on the mechanical and electrical properties of block copolymer electrolytes
Mohit Singh et al.
MACROMOLECULES (2007)
A review on the separators of liquid electrolyte Li-ion batteries
Sheng Shui Zhang
JOURNAL OF POWER SOURCES (2007)
Molecular dynamics simulations to investigate polymer-polymer and polymer-metal oxide interactions
B. Prathab et al.
POLYMER (2007)
Li ion conducting polymer gel electrolytes based on ionic liquid/PVDF-HFP blends
Hui Ye et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2007)
Novel and facile method for the preparation of monodispersed titania hollow spheres
XJ Cheng et al.
LANGMUIR (2006)
Uniform hollow conductive polymer microspheres synthesized with the sulfonated polystyrene template
Y Yang et al.
MATERIALS CHEMISTRY AND PHYSICS (2005)
Electrochemical impedance study on the low temperature of Li-ion batteries
SS Zhang et al.
ELECTROCHIMICA ACTA (2004)
Preparation of core-shell composite polymer particles by a novel heterocoagulation based on hydrophobic interaction
K Yamaguchi et al.
COLLOID AND POLYMER SCIENCE (2004)
Issues and challenges facing rechargeable lithium batteries
JM Tarascon et al.
NATURE (2001)
Thermal, physical and chemical stability of porous polystyrene-type beads with different degrees of crosslinking
YH Li et al.
POLYMER DEGRADATION AND STABILITY (2001)
Gel-coated membranes for lithium-ion polymer batteries
DW Kim et al.
SOLID STATE IONICS (2000)
分享论文
