相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Dynamic evolution of oxide scale on the surfaces of feed stock particles from cracking and segmenting to peel-off while cold spraying copper powder having a high oxygen content
Xiao-Tao Luo et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)
Solid-state additive manufacturing high performance aluminum alloy 6061 enabled by an in-situ micro-forging assisted cold spray
Ying-Kang Wei et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Influence of Grain Refinement and Microstructure on Fatigue Behavior for Solid-State Additively Manufactured Al-Zn-Mg-Cu Alloy
D. Z. Avery et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2020)
Effect of Thermomechanical Processing on Fatigue Behavior in Solid-State Additive Manufacturing of Al-Mg-Si Alloy
Ben A. Rutherford et al.
METALS (2020)
Direct recycling of machine chips through a novel solid-state additive manufacturing process
J. B. Jordon et al.
MATERIALS & DESIGN (2020)
Additive Friction Stir-Enabled Solid-State Additive Manufacturing for the Repair of 7075 Aluminum Alloy
R. Joey Griffiths et al.
APPLIED SCIENCES-BASEL (2019)
On the microstructure and mechanical properties of similar and dissimilar AA7075 and AA2024 friction stir welding joints: Effect of rotational speed
Chenghang Zhang et al.
JOURNAL OF MANUFACTURING PROCESSES (2019)
Microstructure-deformation relationship of additive friction stir-deposition Al-Mg-Si
B. J. Phillips et al.
MATERIALIA (2019)
Heat Treatment of Cold-Sprayed C355 Al for Repair: Microstructure and Mechanical Properties
J. W. Murray et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2018)
Fatigue behavior of freestanding AA2024 and AAA7075 cold spray deposits
B. C. White et al.
INTERNATIONAL JOURNAL OF FATIGUE (2018)
Effect of Heat Exposure on the Fatigue Properties of AA7050 Friction Stir Welds
B. C. White et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2018)
Strain rate effect on the tension and compression stress-state asymmetry for electron beam additive manufactured Ti6Al4V
Omar L. Rodriguez et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Influence of texture and grain refinement on the mechanical behavior of AA2219 fabricated by high shear solid state material deposition
O. G. Rivera et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Fatigue Behavior of Solid-State Additive Manufactured Inconel 625
D. Z. Avery et al.
JOM (2018)
Effect of Friction Stir Processing on Pitting Corrosion and Intergranular Attack of 7075 Aluminum Alloy
M. Navaser et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2017)
Microstructures and mechanical behavior of Inconel 625 fabricated by solid-state additive manufacturing
O. G. Rivera et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Quantitative metallography of precipitating and secondary phases after strengthening treatment of net shaped casting of Al-Zn-Mg-Cu (7000) alloys
Reza Ghiaasiaan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Formation characteristic, microstructure, and mechanical performances of aluminum-based components by friction stir additive manufacturing
Mao Yuqing et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2016)
Friction stir processing of aluminium alloy AA7075: Microstructure, surface chemistry and corrosion resistance
J. J. Pang et al.
CORROSION SCIENCE (2016)
Changing the alloy composition of A17075 for better processability by selective laser melting
Maria L. Montero Sistiaga et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2016)
Friction surface cladding: An exploratory study of a new solid state cladding process
S. Liu et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2016)
Microstructure evolutions and mechanical properties of tubular aluminum produced by friction stir back extrusion
Mahmoud Sarkari Khorrami et al.
MATERIALS & DESIGN (2015)
Friction stir additive manufacturing for high structural performance through microstructural control in an Mg based WE43 alloy
S. Palanivel et al.
MATERIALS & DESIGN (2015)
Friction stir processing of 7075 Al alloy and subsequent aging treatment
Siavash Gholami et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2015)
Microstructure and mechanical properties of dissimilar friction stir welding of 6061-to-7050 aluminum alloys
R. I. Rodriguez et al.
MATERIALS & DESIGN (2015)
EBSD study on microstructure and texture of friction stir welded AA5052-O and AA6061-T6 dissimilar joint
Bin Wang et al.
MATERIALS & DESIGN (2015)
Effect of retrogression and reaging treatment on the microstructure and fatigue crack growth behavior of 7050 aluminum alloy thick plate
Yi Lin Wang et al.
MATERIALS & DESIGN (2014)
Design of the multi-stage quenching process for 7050 aluminum alloy
Jin Zhang et al.
MATERIALS & DESIGN (2014)
Processing maps for hot deformation of the extruded 7075 aluminum alloy bar: Anisotropy of hot workability
Yongbiao Yang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Texture evolution and deformation mechanism in friction stir welding of 2219Al
S. Chen et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Microstructural evolution of 7075 Al gas atomized powder and high-pressure cold sprayed deposition
M. R. Rokni et al.
SURFACE & COATINGS TECHNOLOGY (2014)
Plasticity and Fracture Modeling/Experimental Study of a Porous Metal Under Various Strain Rates, Temperatures, and Stress States
P. G. Allison et al.
JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME (2013)
Modelling and experimental study of fatigue of powder metal steel (FC-0205)
P. G. Allison et al.
POWDER METALLURGY (2013)
Cladding of Advanced Al Alloys Employing Friction Stir Welding
A. A. van der Stelt et al.
CURRENT STATE-OF-THE-ART ON MATERIAL FORMING: NUMERICAL AND EXPERIMENTAL APPROACHES AT DIFFERENT LENGTH-SCALES, PTS 1-3 (2013)
The room temperature mechanical properties of hot rolled 7075 aluminum alloy
A. Abolhasani et al.
MATERIALS & DESIGN (2012)
Nucleation mechanisms of dynamic recrystallization in Inconel 625 superalloy deformed with different strain rates
Guo Qingmiao et al.
RARE METALS (2012)
Free Surface Modeling of Contacting Solid Metal Flows Employing the ALE formulation
A. A. van der Stelt et al.
MATERIAL FORMING - ESAFORM 2012, PTS 1 & 2 (2012)
Improvement of weld temperature distribution and mechanical properties of 7050 aluminum alloy butt joints by submerged friction stir welding
Rui-dong Fu et al.
MATERIALS & DESIGN (2011)
Surface characterization and influence of anodizing process on fatigue life of Al 7050 alloy
Majid Shahzad et al.
MATERIALS & DESIGN (2011)
Effect of strain-induced precipitation on the low angle grain boundary in AA7050 aluminum alloy
Yujing Lang et al.
MATERIALS & DESIGN (2011)
Constitutive base analysis of a 7075 aluminum alloy during hot compression testing
M. R. Rokni et al.
MATERIALS & DESIGN (2011)
The microstructure evolution and nucleation mechanisms of dynamic recrystallization in hot-deformed Inconel 625 superalloy
Defu Li et al.
MATERIALS & DESIGN (2011)
Quantification of damage evolution in a 7075 aluminum alloy using an acoustic emission technique
Marcos Lugo et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Calibration, validation, and verification including uncertainty of a physically motivated internal state variable plasticity and damage model
K. N. Solanki et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2010)
Evolution of microstructure and mechanical properties in naturally aged 7050 and 7075 Al friction stir welds
Christian B. Fuller et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Grain structure and texture evolution during friction stir welding of thin 6016 aluminum alloy sheets
U. F. H. R. Suhuddin et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Microstructure and Cyclic Deformation Behavior of a Friction-Stir-Welded 7075 Al Alloy
A. H. Feng et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2010)
Temperature evolution, microstructure and mechanical properties of friction stir welded thick 2219-O aluminum alloy joints
Weifeng Xu et al.
MATERIALS & DESIGN (2009)
Dynamic testing at high strain rates of an ultrafine-grained magnesium alloy processed by ECAP
B. Li et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2009)
Dynamic softening behaviors of 7075 aluminum alloy
Quan Guo-zheng et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2009)
Deformation behavior and microstructure evolution of 7050 aluminum alloy during high temperature deformation
H. E. Hu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Texture variations in an aluminum friction stir weld
R. W. Fonda et al.
SCRIPTA MATERIALIA (2007)
Grain refinement of aluminum alloys by friction stir processing
JQ Su et al.
PHILOSOPHICAL MAGAZINE (2006)
Stir zone microstructure and strain rate during Al 7075-T6 friction stir spot welding
A. Gerlich et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2006)
Microstructure evolution during FSW/FSP of high strength aluminum alloys
JQ Su et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)
Microstructural evolution in aluminium alloy 7050 during processing
JD Robson
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)
Microstructures and mechanical properties of ultrafine grained 7075 Al alloy processed by ECAP and their evolutions during annealing
YH Zhao et al.
ACTA MATERIALIA (2004)
Friction stir welding of a commercial 7075-T6 aluminum alloy: Grain refinement, thermal stability and tensile properties
A Goloborodko et al.
MATERIALS TRANSACTIONS (2004)
Three-dimensional particle cracking damage development in an Al-Mg-base wrought alloy
A Balasundaram et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2003)
Microstructural investigation friction stir welded 7050-T651 aluminium
JQ Su et al.
ACTA MATERIALIA (2003)
Heterogeneity of crystallographic texture in friction stir welds of aluminum
DP Field et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2001)
Microtexture in the friction-stir weld of an aluminum alloy
YS Sato et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2001)
分享论文
