Enhanced tribological properties of aligned graphene-epoxy composites

The random distribution of graphene in epoxy matrix hinders the further applications of graphene-epoxy composites in the field of tribology. Hence, in order to fully utilize the anisotropic properties of graphene, highly aligned graphene-epoxy composites (AGEC) with horizontally oriented structure have been fabricated via an improved vacuum filtration freeze-drying method. The frictional tests results indicated that the wear rate of AGEC slowly increased from 5.19x10(-6) mm(3)/(N center dot m) to 2.87x10(-5) mm(3)/(N center dot m) with the increasing of the normal load from 2 to 10 N, whereas the friction coefficient (COF) remained a constant of 0.109. Compared to the neat epoxy and random graphene-epoxy composites (RGEC), the COF of AGEC was reduced by 87.5% and 71.2%, and the reduction of wear rate was 86.6% and 85.4% at most, respectively. Scanning electron microscope (SEM) observations illustrated that a compact graphene self-lubricant film was formed on the worn surface of AGEC, which enables AGEC to possess excellent tribological performance. Finally, in light of the excellent tribological properties of AGEC, this study highlights a pathway to expand the tribological applications of graphene-epoxy composites.

Automated summary

An improved method was used to fabricate highly aligned graphene-epoxy composites (AGEC) with horizontally oriented structure, which exhibited excellent tribological performance according to frictional tests results. This study highlights the potential of expanding the tribological applications of graphene-epoxy composites based on the excellent tribological properties of AGEC.