相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Heat transfer and melt dynamics of millimetric ice particles impacting a heated water bath
Katherine Baskin et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)
High power diode laser nitriding of titanium in nitrogen gas filled simple acrylic box container: Microstructure, phase formation, hardness, dendrite and martensite solidification analyses
J. Senthilselvan et al.
MATERIALS CHARACTERIZATION (2020)
Enhanced corrosion resistance of Ti-5 wt.% TiN composite compared to commercial pure Ti produced by selective laser melting in HCl solution
Shengfeng Zhou et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Microstructure evolution and mechanical properties of selective laser melted bulk-form titanium matrix nanocomposites with minor B4C additions
Hailiang Li et al.
MATERIALS & DESIGN (2020)
Processing parameters in laser powder bed fusion metal additive manufacturing
J. P. Oliveira et al.
MATERIALS & DESIGN (2020)
Agglomeration-free nanoscale TiC reinforced titanium matrix composites achieved by in-situ laser additive manufacturing
Wenhou Wei et al.
SCRIPTA MATERIALIA (2020)
Ultrasonic additive manufacturing of bulk Ni-based metallic glass
Wenzheng Wu et al.
JOURNAL OF NON-CRYSTALLINE SOLIDS (2019)
Selective Laser Melting (SLM) of in-situ beta phase reinforced Ti/Zr-based bulk metallic glass matrix composite
Xuehao Gao et al.
SCRIPTA MATERIALIA (2019)
Titanium and nitrogen interactions under laser additive manufacturing conditions
Congyuan Zeng et al.
SURFACE & COATINGS TECHNOLOGY (2019)
Microstructure and mechanical properties of in situ formed TiC-reinforced Ti-6Al-4V matrix composites
Wen-Hou Wei et al.
MATERIALS SCIENCE AND TECHNOLOGY (2018)
Direct metal laser sintering of TiN reinforced Ti6Al4V alloy based metal matrix composite: Fabrication and characterization
Sudip Kundu et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
In vitro evaluation of bioactive glass ceramic coating for application on Ti6Al4V based biomedical implants
Sucharita Sanyal et al.
JOURNAL OF NON-CRYSTALLINE SOLIDS (2018)
Anisotropy of fatigue crack growth in wire arc additive manufactured Ti-6Al-4V
Yong Xie et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Selective Laser Melting of 30CrMnSiA Steel: Laser Energy Density Dependence of Microstructural and Mechanical Properties
Lin-Zhi Wang et al.
ACTA METALLURGICA SINICA-ENGLISH LETTERS (2018)
Heterogeneous microstructure evolution in Ti-6Al-4V alloy thin-wall components deposited by plasma arc additive manufacturing
Jianjun Lin et al.
MATERIALS & DESIGN (2018)
Reaction and formation mechanism of Fe-Si3N4 composite prepared by flash combustion synthesis
Bin Li et al.
CERAMICS INTERNATIONAL (2018)
Peritectic titanium alloys for 3D printing
Pere Barriobero-Vila et al.
NATURE COMMUNICATIONS (2018)
Mechanical properties of titanium-based Ti-6Al-4V alloys manufactured by powder bed additive manufacture
J. Tong et al.
MATERIALS SCIENCE AND TECHNOLOGY (2017)
Mechanical properties of fully martensite microstructure in Ti-6Al-4V alloy transformed from refined beta grains obtained by rapid heat treatment (RHT)
Yan Chong et al.
SCRIPTA MATERIALIA (2017)
TiC particle reinforced Ti-6Al-4V friction surfacing coatings
C. Belei et al.
SURFACE & COATINGS TECHNOLOGY (2017)
The influences of melting degree of TiC reinforcements on microstructure and mechanical properties of laser direct deposited Ti6Al4V-TiC composites
Shunyu Liu et al.
MATERIALS & DESIGN (2017)
Microstructure evolution and mechanical behavior of ultrafine Ti-6Al-4V during low-temperature superplastic deformation
S. V. Zherebtsov et al.
ACTA MATERIALIA (2016)
Softening and compressive twinning in nanosecond ultraviolet pulsed laser-treated Ti6Al4V
David Framil Carpeno et al.
SCRIPTA MATERIALIA (2016)
Fabrication and Machining of Metal Matrix Composites: A Review
Preetkanwal Singh Bains et al.
MATERIALS AND MANUFACTURING PROCESSES (2016)
In situ nitrided titanium alloys: Microstructural evolution during solidification and wear
H. Mohseni et al.
ACTA MATERIALIA (2015)
Rapid preparation of TiC reinforced Ti6Al4V based composites by carburizing method through spark plasma sintering technique
Hao Yanjun et al.
MATERIALS & DESIGN (2015)
Wear characteristics of a thermally oxidized and vacuum diffusion heat treated coating on Ti-6Al-4V alloy
Y. Zhou et al.
WEAR (2015)
Particulate migration behavior and its mechanism during selective laser melting of TiC reinforced Al matrix nanocomposites
Pengpeng Yuan et al.
MATERIALS & DESIGN (2015)
High yield strength bulk Ti based bimodal ultrafine eutectic composites with enhanced plasticity
Dinesh K. Misra et al.
MATERIALS & DESIGN (2014)
Towards strong and stiff carbon nanotube-reinforced high-strength aluminum alloy composites through a microlaminated architecture design
Hui Wei et al.
SCRIPTA MATERIALIA (2014)
Fabrication of in situ AlN-TiN/Al inoculant and its refining efficiency and reinforcing effect on pure aluminum
Kui Wang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2013)
High-strength Ti-6Al-4V with ultrafine-grained structure fabricated by high energy ball milling and spark plasma sintering
Yan Long et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Effect of processing parameters on titanium nitrided surface layers produced by laser gas nitriding
J. H. Abboud
SURFACE & COATINGS TECHNOLOGY (2013)
Heat treatment of Ti6Al4V produced by Selective Laser Melting: Microstructure and mechanical properties
Bey Vrancken et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2012)
Nanocrystalline TiC reinforced Ti matrix bulk-form nanocomposites by Selective Laser Melting (SLM): Densification, growth mechanism and wear behavior
Dongdong Gu et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2011)
Microstructure and mechanical properties of TiC/Ti-6Al-4V composites processed by in situ casting route
Z. J. Wei et al.
MATERIALS SCIENCE AND TECHNOLOGY (2011)
A study of the micro structural evolution during selective laser melting of Ti-6Al-4V
Lore Thijs et al.
ACTA MATERIALIA (2010)
Pulsed laser deposition of hydroxyapatite film on laser gas nitriding NiTi substrate
S. Yang et al.
APPLIED SURFACE SCIENCE (2009)
Machinability of titanium alloys (Ti6Al4V and Ti555.3)
P. -J. Arrazola et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2009)
Preparation of TiN-Ti5Si3 in-situ composites by Selective Laser Melting
Dongdong Gu et al.
MATERIALS LETTERS (2009)
LASER GAS NITRIDING OF TITANIUM AND TITANIUM ALLOYS
J. J. Dai et al.
SURFACE REVIEW AND LETTERS (2009)
Mechanical and electrochemical properties of laser surface nitrided Ti-6Al-4V
A. Biswas et al.
SCRIPTA MATERIALIA (2008)
Microstructure, hardness and cavitation erosion behaviour of Ti-6Al-4V laser nitrided under different gas atmospheres
J. Kaspar et al.
SURFACE ENGINEERING (2007)
CO2 laser gas assisted nitriding of Ti-6Al-4V alloy
B. S. Yibas et al.
APPLIED SURFACE SCIENCE (2006)
Crack-free wear resistance coatings produced on pure titanium and Ti-6Al-4V by laser nitriding
YS Tian et al.
SURFACE REVIEW AND LETTERS (2005)
Machining of a Zr-Ti-Al-Cu-Ni metallic glass
M Bakkal et al.
SCRIPTA MATERIALIA (2004)
Study of the surface layer formed by the laser processing of Ti-6Al-4V alloy in a dilute nitrogen environment
MS Selamat et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2001)
分享论文
