相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Finite element analysis comparing short-segment instrumentation with conventional pedicle screws and the Schanz pedicle screw in lumbar 1 fractures
Fei Zhou et al.
NEUROSURGICAL REVIEW (2020)
Biomechanical analysis of single-level interbody fusion with different internal fixation rod materials: a finite element analysis
Yueh-Ying Hsieh et al.
BMC MUSCULOSKELETAL DISORDERS (2020)
Minimally invasive transforaminal and anterior lumbar interbody fusion surgery at level L5-S1
D. S. Fidalgo et al.
COMPUTER METHODS IN BIOMECHANICS AND BIOMEDICAL ENGINEERING (2020)
Numerical simulation of lateral and transforaminal lumbar interbody fusion, two minimally invasive surgical approaches
B. Areias et al.
COMPUTER METHODS IN BIOMECHANICS AND BIOMEDICAL ENGINEERING (2020)
Treatment of Thoracolumbar Fractures Through Different Short Segment Pedicle Screw Fixation Techniques: A Finite Element Analysis
Tie-nan Wang et al.
ORTHOPAEDIC SURGERY (2020)
Numerical investigation of the sternoclavicular joint modeling technique for improving the surgical treatment of pectus excavatum
Beop-Yong Lim et al.
SCIENTIFIC REPORTS (2020)
Identification of Surgical Plan for Syndesmotic Fixation Procedure Based on Finite Element Method
Tae Sik Goh et al.
APPLIED SCIENCES-BASEL (2020)
Biomechanical Evaluation of Transforaminal Lumbar Interbody Fusion and Oblique Lumbar Interbody Fusion on the Adjacent Segment: A Finite Element Analysis
Bingjin Wang et al.
WORLD NEUROSURGERY (2019)
Biomechanical effects of metastasis in the osteoporotic lumbar spine: A Finite Element Analysis
Giuseppe Salvatore et al.
BMC MUSCULOSKELETAL DISORDERS (2018)
Biomechanical effects of USS fixation with different screw insertion depths on the vertebrae stiffness and screw stress for the treatment of the L1 fracture
Jifeng Liu et al.
JOURNAL OF BACK AND MUSCULOSKELETAL REHABILITATION (2018)
Effect of the screw type (S2-alar-iliac and iliac), screw length, and screw head angle on the risk of screw and adjacent bone failures after a spinopelvic fixation technique: A finite element analysis
Jong Ki Shin et al.
PLOS ONE (2018)
Lumbar spine finite element model for healthy subjects: development and validation
Ming Xu et al.
COMPUTER METHODS IN BIOMECHANICS AND BIOMEDICAL ENGINEERING (2017)
A novel finite element model of the ovine lumbar intervertebral disc with anisotropic hyperelastic material properties
Gloria Casaroli et al.
PLOS ONE (2017)
Biomechanical evaluation of pedicle screw fixation system in spinal adjacent levels using polyetheretherketone, carbon-fiber-reinforced polyetheretherketone, and traditional titanium as rod materials
Kyoung-Tak Kang et al.
COMPOSITES PART B-ENGINEERING (2017)
Surgical outcomes of temporary short-segment instrumentation without augmentation for thoracolumbar burst fractures
Hiroyuki Aono et al.
INJURY-INTERNATIONAL JOURNAL OF THE CARE OF THE INJURED (2016)
Fatigue Performance of Cortical Bone Trajectory Screw Compared With Standard Trajectory Pedicle Screw
Yusuf Tahiri Akpolat et al.
SPINE (2016)
Bilateral pedicle screw fixation provides superior biomechanical stability in transforaminal lumbar interbody fusion: a finite element study
Divya V. Ambati et al.
SPINE JOURNAL (2015)
Cortical Bone Trajectory for Lumbar Pedicle Screw Placement: A Review of Published Reports
Kevin Phan et al.
ORTHOPAEDIC SURGERY (2015)
Biomechanical efficacy of a combined interspinous fusion system with a lumbar interbody fusion cage
Yeong-Hyeon Kim et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2015)
Investigation of impact loading rate effects on the ligamentous cervical spinal load-partitioning using finite element model of functional spinal unit C2-C3
Tanvir Mustafy et al.
JOURNAL OF BIOMECHANICS (2014)
Comparison of eight published static finite element models of the intact lumbar spine: Predictive power of models improves when combined together
M. Dreischarf et al.
JOURNAL OF BIOMECHANICS (2014)
Effect of Physiological Loads on Cortical and Traditional Pedicle Screw Fixation
Daniel A. Baluch et al.
SPINE (2014)
In Vivo Analysis of Insertional Torque During Pedicle Screwing Using Cortical Bone Trajectory Technique
Keitaro Matsukawa et al.
SPINE (2014)
Biomechanics of the spine. Part I: Spinal stability
Roberto Izzo et al.
EUROPEAN JOURNAL OF RADIOLOGY (2013)
Comparison Among Load-, ROM-, and Displacement-Controlled Methods Used in the Lumbosacral Nonlinear Finite-Element Analysis
Wen-Hsien Chuang et al.
SPINE (2013)
The role of fusion in the management of burst fractures of the thoracolumbar spine treated by short segment pedicle screw fixation A prospective randomised trial
N. Jindal et al.
JOURNAL OF BONE AND JOINT SURGERY-BRITISH VOLUME (2012)
Optimised in vitro applicable loads for the simulation of lateral bending in the lumbar spine
Marcel Dreischarf et al.
MEDICAL ENGINEERING & PHYSICS (2012)
Optimised loads for the simulation of axial rotation in the lumbar spine
Marcel Dreischarf et al.
JOURNAL OF BIOMECHANICS (2011)
Haptically integrated simulation of a finite element model of thoracolumbar spine combining offline biomechanical response analysis of intervertebral discs
Kim Tho Huynh et al.
COMPUTER-AIDED DESIGN (2010)
The Micromechanical Role of the Annulus Fibrosus Components Under Physiological Loading of the Lumbar Spine
Ugur M. Ayturk et al.
JOURNAL OF BIOMECHANICAL ENGINEERING-TRANSACTIONS OF THE ASME (2010)
Proximal Junctional Vertebral Fracture in Adults After Spinal Deformity Surgery Using Pedicle Screw Constructs Analysis of Morphological Features
Kei Watanabe et al.
SPINE (2010)
Realistic loading conditions for upper body bending
A. Rohlmann et al.
JOURNAL OF BIOMECHANICS (2009)
Load- and displacement-controlled finite element analyses on fusion and non-fusion spinal implants
Z-C Zhong et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE (2009)
Cortical bone trajectory for lumbar pedicle screws
B. G. Santoni et al.
SPINE JOURNAL (2009)
Biomechanical effect of the extent of vertebral body fracture on the thoracolumbar spine with pedicle screw fixation:: An in vitro study
Xiang-Yang Wang et al.
JOURNAL OF CLINICAL NEUROSCIENCE (2008)
Application of a calibration method provides more realistic results for a finite element model of a lumbar spinal segment
Hendrik Schmidt et al.
CLINICAL BIOMECHANICS (2007)
Application of a new calibration method for a three-dimensional finite element model of a human lumbar annulus fibrosus
H Schmidt et al.
CLINICAL BIOMECHANICS (2006)
Sagittal range of motion after a spinal fracture: does ROM correlate with functional outcome?
RB Post et al.
EUROPEAN SPINE JOURNAL (2004)
A biomechanical comparison of posterolateral fusion and posterior fusion in the lumbar spine
CS Chen et al.
JOURNAL OF SPINAL DISORDERS & TECHNIQUES (2002)
Thoracolumbar spinal fractures: segmental range of motion after dorsal spondylodesis in 82 patients: a prospective study
VJM Leferink et al.
EUROPEAN SPINE JOURNAL (2002)
A finite element model for predicting the biomechanical behaviour of the human lumbar spine
T Pitzen et al.
CONTROL ENGINEERING PRACTICE (2002)
Load-Sharing Between Anterior and Posterior Elements in a Lumbar Motion Segment Implanted With an Artificial Disc
Andrew P. Dooris et al.
SPINE (2001)
分享论文
