相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Femur Auxetic Meta-Implants with Tuned Micromotion Distribution
Naeim Ghavidelnia et al.
MATERIALS (2021)
Recent progress in extrusion 3D bioprinting of hydrogel biomaterials for tissue regeneration: a comprehensive review with focus on advanced fabrication techniques
Mohsen Askari et al.
BIOMATERIALS SCIENCE (2021)
Control-Based 4D Printing: Adaptive 4D-Printed Systems
Ali Zolfagharian et al.
APPLIED SCIENCES-BASEL (2020)
4D-bioprinted silk hydrogels for tissue engineering
Soon Hee Kim et al.
BIOMATERIALS (2020)
Tissue-Engineered Trachea Consisting of Electrospun Patterned scPLA/GO-g-IL Fibrous Membranes with Antibacterial Property and 3D-Printed Skeletons with Elasticity
Yuan Kang et al.
BIOMACROMOLECULES (2019)
A 3-dimensional bioprinted tracheal segment implant pilot study: Rabbit tracheal resection with graft implantation
Rachel Kaye et al.
INTERNATIONAL JOURNAL OF PEDIATRIC OTORHINOLARYNGOLOGY (2019)
Tissue-engineered trachea from a 3D-printed scaffold enhances whole-segment tracheal repair in a goat model
Dekai Xia et al.
JOURNAL OF TISSUE ENGINEERING AND REGENERATIVE MEDICINE (2019)
3D-printed, externally-implanted, bioresorbable airway splints for severe tracheobronchomalacia
Andrea S. Les et al.
LARYNGOSCOPE (2019)
Experimental Tracheal Replacement Using 3-dimensional Bioprinted Artificial Trachea with Autologous Epithelial Cells and Chondrocytes
Jae-Hyun Park et al.
SCIENTIFIC REPORTS (2019)
Long-segmental tracheal reconstruction in rabbits with pedicled Tissue-engineered trachea based on a 3D-printed scaffold
Botao Gao et al.
ACTA BIOMATERIALIA (2019)
Subglottic stenosis in children: Our experience at a pediatric tertiary center for 8 years in South Korea
Jin-Choon Lee et al.
INTERNATIONAL JOURNAL OF PEDIATRIC OTORHINOLARYNGOLOGY (2019)
Selection of the optimum 3D-printed pore and the surface modification techniques for tissue engineering tracheal scaffold in vivo reconstruction
Shu Pan et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2019)
Replacement of Rat Tracheas by Layered, Trachea-Like, Scaffold-Free Structures of Human Cells Using a Bio-3D Printing System
Ryusuke Machino et al.
ADVANCED HEALTHCARE MATERIALS (2019)
Designing a tissue-engineered tracheal scaffold for preclinical evaluation
Cameron A. Best et al.
INTERNATIONAL JOURNAL OF PEDIATRIC OTORHINOLARYNGOLOGY (2018)
Scaffold-free trachea regeneration by tissue engineering with bio-3D printing
Daisuke Taniguchi et al.
INTERACTIVE CARDIOVASCULAR AND THORACIC SURGERY (2018)
A rational tissue engineering strategy based on three-dimensional (3D) printing for extensive circumferential tracheal reconstruction
Jeong Hun Park et al.
BIOMATERIALS (2018)
Immune responses to bioengineered organs
Jordi Ochando et al.
CURRENT OPINION IN ORGAN TRANSPLANTATION (2017)
Ex vivo tracheomalacia model with 3D-printed external tracheal splint
Rachel Kaye et al.
LARYNGOSCOPE (2017)
A comparison of tracheal scaffold strategies for pediatric transplantation in a rabbit model
Elizabeth F. Maughan et al.
LARYNGOSCOPE (2017)
Cardiac 3D Printing and its Future Directions
Marija Vukicevic et al.
JACC-CARDIOVASCULAR IMAGING (2017)
Precise stacking of decellularized extracellular matrix based 3D cell-laden constructs by a 3D cell printing system equipped with heating modules
Geunseon Ahn et al.
SCIENTIFIC REPORTS (2017)
Treatment of Severe Acquired Tracheomalacia With a Patient-Specific, 3D-Printed, Permanent Tracheal Splint
Robert J. Morrison et al.
JAMA OTOLARYNGOLOGY-HEAD & NECK SURGERY (2017)
Tissue-engineered trachea from a 3D-printed scaffold enhances whole-segment tracheal repair
Manchen Gao et al.
SCIENTIFIC REPORTS (2017)
Circumferential Three-Dimensional-Printed Tracheal Grafts: Research Model Feasibility and Early Results
Faiz Y. Bhora et al.
ANNALS OF THORACIC SURGERY (2017)
Three-Dimensional-Printed Bioengineered Tracheal Grafts: Preclinical Results and Potential for Human Use
Sadiq S. Rehmani et al.
ANNALS OF THORACIC SURGERY (2017)
3D printed complex tissue construct using stem cell-laden decellularized extracellular matrix bioinks for cardiac repair
Jinah Jang et al.
BIOMATERIALS (2017)
Segmental tracheal reconstruction by 3D-printed scaffold: Pivotal role of asymmetrically porous membrane
Doh Young Lee et al.
LARYNGOSCOPE (2016)
Personalized 3D printed model of kidney and tumor anatomy: a useful tool for patient education
Jean-Christophe Bernhard et al.
WORLD JOURNAL OF UROLOGY (2016)
A Tubular Biomaterial Construct Exhibiting a Negative Poisson's Ratio
Jin Woo Lee et al.
PLOS ONE (2016)
Self-expanding/shrinking structures by 4D printing
M. Bodaghi et al.
SMART MATERIALS AND STRUCTURES (2016)
Tracheal suspension by using 3-dimensional printed personalized scaffold in a patient with tracheomalacia
Lijun Huang et al.
JOURNAL OF THORACIC DISEASE (2016)
Development of a 3D cell printed construct considering angiogenesis for liver tissue engineering
Jin Woo Lee et al.
BIOFABRICATION (2016)
3D printed polyurethane prosthesis for partial tracheal reconstruction: a pilot animal study
Soo Yeon Jung et al.
BIOFABRICATION (2016)
Human turbinate mesenchymal stromal cell sheets with bellows graft for rapid tracheal epithelial regeneration
Jeong Hun Park et al.
ACTA BIOMATERIALIA (2015)
A novel tissue-engineered trachea with a mechanical behavior similar to native trachea
Jeong Hun Park et al.
BIOMATERIALS (2015)
Introducing a 3-dimensionally Printed, Tissue-Engineered Graft for Airway Reconstruction: A Pilot Study
Todd A. Goldstein et al.
OTOLARYNGOLOGY-HEAD AND NECK SURGERY (2015)
Mitigation of tracheobronchomalacia with 3D-printed personalized medical devices in pediatric patients
Robert J. Morrison et al.
SCIENCE TRANSLATIONAL MEDICINE (2015)
The role of physiological mechanical cues on mesenchymal stem cell differentiation in an airway tract-like dense collagen-silk fibroin construct
Chiara E. Ghezzi et al.
BIOMATERIALS (2014)
Airway tissue engineering: an update
Jonathan M. Fishman et al.
EXPERT OPINION ON BIOLOGICAL THERAPY (2014)
Treatment of Severe Porcine Tracheomalacia With a 3-Dimensionally Printed, Bioresorbable, External Airway Splint
David A. Zopf et al.
JAMA OTOLARYNGOLOGY-HEAD & NECK SURGERY (2014)
Bioresorbable Airway Splint Created with a Three-Dimensional Printer
David A. Zopf et al.
NEW ENGLAND JOURNAL OF MEDICINE (2013)
Development of a 3D bellows tracheal graft: mechanical behavior analysis, fabrication and an in vivo feasibility study
Jeong Hun Park et al.
BIOFABRICATION (2012)