A Novel Perovskite Electron-Ion Conductive Coating to Simultaneously Enhance Cycling Stability and Rate Capability of Li1.2Ni0.13Co0.13Mn0.54O2 Cathode Material for Lithium-Ion Batteries

Poor cycling stability and rate capability are two key issues needing to be solved for Li- and Mn-rich oxide cathode material for lithium-ion batteries (LIBs). Herein, a novel perovskite electron-ion mixed conductor Nd0.6Sr0.4CoO3 (NSCO) is used as the coating layer on Li1.2Ni0.13Co0.13Mn0.54O2 (LNCMO) to simultaneously enhance its cycling stability and rate capability. By coating 3 wt% NSCO, LNCMO-3NSCO exhibits an optimal cycling performance with a capacity retention of 99% at 0.1C (1C = 200 mA g(-1)) after 60 cycles, 91% at 1C after 300 cycles, and 54% at 20C after 1000 cycles, much better than 78%, 63%, and 3% of LNCMO, respectively. Even at a high charge and discharge rate of 50C, LNCMO-3NSCO exhibits a discharge capacity of 53 mAh g(-1) and a mid-point discharge voltage of 2.88 V, much higher than those of LNCMO (24 mA h g(-1) and 2.40 V, respectively). Benefiting from the high electronic conductivity (1.46 S cm(-1)) and ionic conductivity (1.48 x 10(-7) S cm(-1)), NSCO coating not only suppresses transition metals dissolution and structure transformation, but also significantly enhances electronic conductivity and Li+ diffusion coefficient of LNCMO by an order of magnitude.

Automated summary

The novel perovskite electron-ion mixed conductor Nd0.6Sr0.4CoO3 can effectively enhance the cycling stability and rate capability of Li- and Mn-rich oxide cathode materials in lithium-ion batteries. Coating Li1.2Ni0.13Co0.13Mn0.54O2 with 3 wt% NSCO significantly improves its cycling performance and rate capability, with enhanced electronic conductivity and Li+ diffusion coefficient.