相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Experimental study on thermal performance of a mobilized thermal energy storage system: A case study of hydrated salt latent heat storage
Yan Wang et al.
ENERGY AND BUILDINGS (2020)
Performance comparison of medium temperature domestic packed bed latent heat storage systems
Ashmore Mawire et al.
RENEWABLE ENERGY (2020)
Experimental investigation of a photovoltaic thermal collector with energy storage for power generation, building heating and natural ventilation
Guohui Gan et al.
RENEWABLE ENERGY (2020)
Performance enhancement of PCM latent heat thermal energy storage system utilizing a modified webbed tube heat exchanger
Ahmed H. N. Al-Mudhafar et al.
ENERGY REPORTS (2020)
Emerging paraffin/carbon-coated nanoscroll composite phase change material for thermal energy storage
Xiaochao Zuo et al.
RENEWABLE ENERGY (2020)
Thermal energy storage performance of a three-PCM cascade tank in a high-temperature packed bed system
Qianjun Mao et al.
RENEWABLE ENERGY (2020)
Political economy of renewable energy: Does institutional quality make a difference in renewable energy consumption?
Umut Uzar
RENEWABLE ENERGY (2020)
Heat transfer enhancement and melting behavior of phase change material in a direct-contact thermal energy storage container
Shiquan He et al.
JOURNAL OF ENERGY STORAGE (2020)
A novel composite PCM for seasonal thermal energy storage of solar water heating system
Wei Wu et al.
RENEWABLE ENERGY (2020)
CO2 emissions, economic growth, renewable and non-renewable energy production and foreign trade in China
Yulong Chen et al.
RENEWABLE ENERGY (2019)
Energy consumption, CO2 emissions and economic growth in developed, emerging and Middle East and North Africa countries
Bashir Muhammad
ENERGY (2019)
Impact of renewable energy consumption and financial development on CO2 emissions and economic growth in the MENA region: A panel vector autoregressive (PVAR) analysis
Lanouar Charfeddine et al.
RENEWABLE ENERGY (2019)
Preparation and thermal properties of sodium acetate trihydrate as a novel phase change material for energy storage
Yan Wang et al.
ENERGY (2019)
Characterization and stability study of a form-stable erythritol/expanded graphite composite phase change material for thermal energy storage
Mengdi Yuan et al.
RENEWABLE ENERGY (2019)
A review of the applications of phase change materials in cooling, heating and power generation in different temperature ranges
Kun Du et al.
APPLIED ENERGY (2018)
An overview of thermal energy storage systems
Guruprasad Alva et al.
ENERGY (2018)
A comparative review of heating systems in EU countries, based on efficiency and fuel cost
Georgios Martinopoulos et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2018)
Review on thermal performances and applications of thermal energy storage systems with inorganic phase change materials
Yaxue Lin et al.
ENERGY (2018)
Mobilized thermal energy storage: Materials, containers and economic evaluation
Shaopeng Guo et al.
ENERGY CONVERSION AND MANAGEMENT (2018)
Solar thermal energy storage based on sodium acetate trihydrate phase change hydrogels with excellent light-to-thermal conversion performance
Qiangqiang Xiao et al.
ENERGY (2018)
Review on transportable phase change material in thermal energy storage systems
N. H. S. Tay et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)
Review on system and materials requirements for high temperature thermal energy storage. Part 1: General requirements
Jaume Gasia et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)
Identification and characterization of promising phase change materials for solar cooling applications
Vincenza Brancato et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2017)
Thermal performance of a shell-and-tube latent heat thermal energy storage unit: Role of annular fins
Xiaohu Yang et al.
APPLIED ENERGY (2017)
Techno-economic assessment of mobilized thermal energy storage for distributed users: A case study in China
Shaopeng Guo et al.
APPLIED ENERGY (2017)
Thermophysical Characterization of MgCl2•6H2O, Xylitol and Erythritol as Phase Change Materials (PCM) for Latent Heat Thermal Energy Storage (LHTES)
Stephan Hoehlein et al.
MATERIALS (2017)
Economic optimization design for shell-and-tube heat exchangers by a Tsallis differential evolution
Emerson Hochsteiner de Vasconcelos Segundo et al.
APPLIED THERMAL ENGINEERING (2017)
Thermal energy storage for low and medium temperature applications using phase change materials - A review
Jose Pereira da Cunha et al.
APPLIED ENERGY (2016)
Numerical study of the improvement of an indirect contact mobilized thermal energy storage container
Shaopeng Guo et al.
APPLIED ENERGY (2016)
Macro-encapsulation of metallic phase change material using cylindrical-type ceramic containers for high-temperature thermal energy storage
Ryo Fukahori et al.
APPLIED ENERGY (2016)
Thermal energy storage (TES) for industrial waste heat (IWH) recovery: A review
Laia Miro et al.
APPLIED ENERGY (2016)
Industrial surplus heat transportation for use in district heating
J. N. W. Chiu et al.
ENERGY (2016)
Study on phase change interface for erythritol with nano-copper in spherical container during heat transport
Xuelai Zhang et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2016)
Application of radiant floor cooling in large space buildings - A review
Kang Zhao et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2016)
Experimental studies on the supercooling and melting/freezing characteristics of nano-copper/sodium acetate trihydrate composite phase change materials
Wenlong Cui et al.
RENEWABLE ENERGY (2016)
Synergistic enhancement of thermal conductivity for expanded graphite and carbon fiber in paraffin/EVA form-stable phase change materials
Benqiang Tian et al.
SOLAR ENERGY (2016)
Numerical simulation study on discharging process of the direct-contact phase change energy storage system
Weilong Wang et al.
APPLIED ENERGY (2015)
Effects of natural convection on latent heat storage performance of salt in a horizontal concentric tube
Y. B. Tao et al.
APPLIED ENERGY (2015)
Industrial waste heat recovery technologies: An economic analysis of heat transformation technologies
Sarah Brueckner et al.
APPLIED ENERGY (2015)
Maximization of performance of a PCM latent heat storage system with innovative fins
A. Sciacovelli et al.
APPLIED ENERGY (2015)
High thermal conductivity phase change composite with percolating carbon fiber network
Takahiro Nomura et al.
APPLIED ENERGY (2015)
Numerical study of PCM solidification in a finned tube thermal storage including natural convection
Imen Jmal et al.
APPLIED THERMAL ENGINEERING (2015)
Experimental study on solving the blocking for the direct contact mobilized thermal energy storage container
Shaopeng Guo et al.
APPLIED THERMAL ENGINEERING (2015)
Experimental evaluation at pilot plant scale of multiple PCMs (cascaded) vs. single PCM configuration for thermal energy storage
Gerard Peiro et al.
RENEWABLE ENERGY (2015)
Eutectic mixtures of sugar alcohols for thermal energy storage in the 50-90 °C temperature range
G. Diarce et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2015)
Mobile Sorption Heat Storage in Industrial Waste Heat Recovery
Andreas Kroenauer et al.
9TH INTERNATIONAL RENEWABLE ENERGY STORAGE CONFERENCE, IRES 2015 (2015)
Waste heat recovery through plate heat exchanger based thermoelectric generator system
Tongcai Wang et al.
APPLIED ENERGY (2014)
Computer simulation with TRNSYS for a mobile refrigeration system incorporating a phase change thermal storage unit
Ming Liu et al.
APPLIED ENERGY (2014)
Spatial effects of carbon dioxide emissions from residential energy consumption: A county-level study using enhanced nocturnal lighting
Heli Lu et al.
APPLIED ENERGY (2014)
Experimental study on the direct/indirect contact energy storage container in mobilized thermal energy system (M-TES)
Weilong Wang et al.
APPLIED ENERGY (2014)
A numerical and experimental study of solidification around axially finned heat pipes for high temperature latent heat thermal energy storage units
Abdulmajed Khalifa et al.
APPLIED THERMAL ENGINEERING (2014)
Paraffin/diatomite/multi-wall carbon nanotubes composite phase change material tailor-made for thermal energy storage cement-based composites
Biwan Xu et al.
ENERGY (2014)
The technological calculation for synergistic system of BF slag waste heat recovery and carbon resources reduction
Wenjun Duan et al.
ENERGY CONVERSION AND MANAGEMENT (2014)
A combined experimental and simulation study on charging process of Erythritol-HTO direct-blending based energy storage system
Weilong Wang et al.
ENERGY CONVERSION AND MANAGEMENT (2014)
Multi-walled carbon nanotubes added to Na2CO3/MgO composites for thermal energy storage
Feng Ye et al.
PARTICUOLOGY (2014)
Using industrial and commercial waste heat for residential heat supply: A case study from Hamburg, Germany
S. Brueckner et al.
SUSTAINABLE CITIES AND SOCIETY (2014)
Economic efficiency of mobile latent heat storages
Marco Deckert et al.
8TH INTERNATIONAL RENEWABLE ENERGY STORAGE CONFERENCE AND EXHIBITION (IRES 2013) (2014)
Computational studies on a latent thermal energy storage system with integral heat pipes for concentrating solar power
K. Nithyanandam et al.
APPLIED ENERGY (2013)
Comparison of pinned and finned tubes in a phase change thermal energy storage system using CFD
N. H. S. Tay et al.
APPLIED ENERGY (2013)
Numerical simulation study on optimizing charging process of the direct contact mobilized thermal energy storage
Shaopeng Guo et al.
APPLIED ENERGY (2013)
Economic assessment of the mobilized thermal energy storage (M-TES) system for distributed heat supply
Hailong Li et al.
APPLIED ENERGY (2013)
An overview of the political, technical and economical aspects of gas-fired distributed energy system in China
Qiaohui Chen et al.
APPLIED THERMAL ENGINEERING (2013)
Thermal conductivity enhancement of erythritol as PCM by using graphite and nickel particles
Teppei Oya et al.
APPLIED THERMAL ENGINEERING (2013)
Performance analysis of heat storage of direct-contact heat exchanger with phase-change material
Takahiro Nomura et al.
APPLIED THERMAL ENGINEERING (2013)
Heat storage in direct-contact heat exchanger with phase change material
Takahiro Nomura et al.
APPLIED THERMAL ENGINEERING (2013)
An Overview of Adsorbents in the Rotary Desiccant Dehumidifier for Air Dehumidification
Weilong Wang et al.
DRYING TECHNOLOGY (2013)
Entropy generation analysis for the design improvement of a latent heat storage system
Elisa Guelpa et al.
ENERGY (2013)
Sulfuric Acid Modified Bentonite as the Support of Tetraethylenepentamine for CO2 Capture
Weilong Wang et al.
ENERGY & FUELS (2013)
Industrial waste heat utilization for low temperature district heating
Hao Fang et al.
ENERGY POLICY (2013)
Material selection and testing for thermal energy storage in solar cooling
Antoni Gil et al.
RENEWABLE ENERGY (2013)
Phase change composite based on porous nickel and erythritol
Teppei Oya et al.
APPLIED THERMAL ENGINEERING (2012)
Integrated IDA-ANN-DEA for assessment and optimization of energy consumption in industrial sectors
O. A. Olanrewaju et al.
ENERGY (2012)
A review of the application of radiant cooling & heating systems in Mainland China
R. Hu et al.
ENERGY AND BUILDINGS (2012)
Fins and turbulence promoters for heat transfer enhancement in latent heat storage systems
K. A. R. Ismail et al.
EXPERIMENTAL THERMAL AND FLUID SCIENCE (2011)
Experimental study on the melting and solidification behaviour of a medium temperature phase change storage material (Erythritol) system augmented with fins to power a LiBr/H2O absorption cooling system
Francis Agyenim et al.
RENEWABLE ENERGY (2011)
Fundamental Flow Characteristics in a Small Columnar Latent Heat Storage Bath
Hiroshi Nogami et al.
ISIJ INTERNATIONAL (2010)
Feasibility of an Advanced Waste Heat Transportation System Using High-temperature Phase Change Material (PCM)
Takahiro Nomura et al.
ISIJ INTERNATIONAL (2010)
Heat transfer enhancement in medium temperature thermal energy storage system using a multitube heat transfer array
Francis Agyenim et al.
RENEWABLE ENERGY (2010)
Waste heat transportation system, using phase change material (PCM) from steelworks to chemical plant
Takahiro Nomura et al.
RESOURCES CONSERVATION AND RECYCLING (2010)
District heating and energy efficiency in detached houses of differing size and construction
Anna Joelsson et al.
APPLIED ENERGY (2009)
Enhanced thermal conductivity and thermal performance of form-stable composite phase change materials by using β-Aluminum nitride
Weilong Wang et al.
APPLIED ENERGY (2009)
A review on transportation of heat energy over long distance: Exploratory development
Q. Ma et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2009)
High latent heat storage and high thermal conductive phase change materials using exfoliated graphite nanoplatelets
Sumin Kim et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2009)
Sparse district-heating in Sweden
Stefan Forsaeus Nilsson et al.
APPLIED ENERGY (2008)
Thermal and flow behaviors in heat transportation container using phase change material
Akihide Kaizawa et al.
ENERGY CONVERSION AND MANAGEMENT (2008)
Technical feasibility study of waste heat transportation system using phase change material from industry to city
Akihide Kaizawa et al.
ISIJ INTERNATIONAL (2008)
Elaboration of conductive thermal storage composites made of phase change materials and graphite for solar plant
S. Pincemin et al.
JOURNAL OF SOLAR ENERGY ENGINEERING-TRANSACTIONS OF THE ASME (2008)
Thermophysical and heat transfer properties of phase change material candidate for waste heat transportation system
Akihide Kaizawa et al.
HEAT AND MASS TRANSFER (2008)
Future use of heat pumps in Swedish district heating systems: Short- and long-term impact of policy instruments and planned investments
Marcus Eriksson et al.
APPLIED ENERGY (2007)
Heat transfer analysis of phase change process in a finned-tube thermal energy storage system using artificial neural network
Kemal Ermis et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2007)
An application of energy and exergy analysis in residential sector of Malaysia
R. Saidur et al.
ENERGY POLICY (2007)
Open-cell aluminum foams filled with phase change materials as compact heat sinks
Sung-Tae Hong et al.
SCRIPTA MATERIALIA (2006)
Thermal characteristics of magnesium nitrate hexahydrate and magnesium chloride hexahydrate mixture as a phase change material for effective utilization of urban waste heat
K Nagano et al.
APPLIED THERMAL ENGINEERING (2004)
Heat transfer prediction for a direct contact ice thermal energy storage
T Kiatsiriroat et al.
ENERGY CONVERSION AND MANAGEMENT (2003)
Technical grade paraffin waxes as phase change materials for cool thermal storage and cool storage systems capital cost estimation
B He et al.
ENERGY CONVERSION AND MANAGEMENT (2002)
A system perspective on the heating of detached houses
L Gustavsson et al.
ENERGY POLICY (2002)
Thermal analysis of a finned-tube LHTS module for a solar dynamic power system
RV Seeniraj et al.
HEAT AND MASS TRANSFER (2002)
Performance analysis of a direct-contact thermal energy storage-solidification
T Kiatsiriroat et al.
RENEWABLE ENERGY (2000)
分享论文
