4.3 Article

Numerical investigation of blowing ratio, density ratio and axial position of film holes on the vane endwall film cooling effectiveness with upstream step

出版社

SAGE PUBLICATIONS LTD
DOI: 10.1177/09544100211016585

关键词

Film cooling; secondary flow; blowing ratio; density ratio; upstream step

资金

  1. National Natural Science Foundation of China [51776200]
  2. National Science and Technology Major Project [2017-III-00030027]
  3. Tianjin Municipal Natural Science Foundation [17JCQNJC04600]
  4. Chinese Academy of Sciences

向作者/读者索取更多资源

The aerothermal performance of interrupted slot and film holes was investigated numerically, showing that the interrupted slot performs better and the step formed along with it affects film cooling characteristics. Density ratio has a smaller effect on total pressure loss, and positioning film holes away from the upstream step delivers optimal cooling efficiency.
The aerothermal performance of interrupted slot and film holes was numerically investigated. Previous study indicates that the interrupted slot performs better compared to the conventional slot. In the meanwhile, the step formed along with the interrupted slot affects the film cooling characteristics. In this article, a row of film holes is arranged downstream of the step, and the mass flow rate for the interrupted slot is constant at 1%. Blowing ratio (BR) from 0.5 to 1.5 and density ratio from 1 to 2 were studied for the film holes. Endwall film cooling effectiveness distribution indicates that film cooling is easily affected by the secondary flow inside passage and the upstream step. Coolant traces are split into two parts due to the effects of step vortex and transverse flow. For different density ratios, increasing BR shows a different trend of film cooling effectiveness due to the variation of coolant momentum. The coolant jet is easily affected by the secondary flow when its momentum is low, but tends to liftoff when its momentum is too high. As a result, it is better to position the film holes far away from the upstream step. The total pressure loss coefficient distribution at the passage exit indicates that the coolant injection increases the total pressure loss. But density ratio has smaller effect on the loss variation. Besides, two axial positions of cooling holes were studied to improve the endwall cooling performance. Without the effect of step vortex, the film effectiveness of cooling holes is improved.

作者

我是这篇论文的作者
点击您的名字以认领此论文并将其添加到您的个人资料中。

评论

主要评分

4.3
评分不足

次要评分

新颖性
-
重要性
-
科学严谨性
-
评价这篇论文

推荐

暂无数据
暂无数据