相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。In-process monitoring of porosity in additive manufacturing using optical emission spectroscopy
Mohammad Montazeri et al.
IISE TRANSACTIONS (2020)
A 3D Finite Difference Thermal Model Tailored for Additive Manufacturing
Tom Stockman et al.
JOM (2019)
Joint Multifractal and Lacunarity Analysis of Image Profiles for Manufacturing Quality Control
Farhad Imani et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2019)
Thermal Modeling in Metal Additive Manufacturing Using Graph Theory
M. Reza Yavari et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2019)
A design framework for additive manufacturing
H. Bikas et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Deep Learning of Variant Geometry in Layerwise Imaging Profiles for Additive Manufacturing Quality Control
Farhad Imani et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2019)
Prediction and Experimental Validation of Part Thermal History in the Fused Filament Fabrication Additive Manufacturing Process
Mriganka Roy et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2019)
Heterogeneous sensor-based condition monitoring in directed energy deposition
Mohammad Montazeri et al.
ADDITIVE MANUFACTURING (2019)
Design Rules for Additive Manufacturing - Understanding the Fundamental Thermal Phenomena to Reduce Scrap
M. Reza Yavari et al.
SUSTAINABLE MANUFACTURING FOR GLOBAL CIRCULAR ECONOMY (2019)
In Situ Monitoring of Thin-Wall Build Quality in Laser Powder Bed Fusion Using Deep Learning
Aniruddha Gaikwad et al.
SMART AND SUSTAINABLE MANUFACTURING SYSTEMS (2019)
From Design Complexity to Build Quality in Additive Manufacturing-A Sensor-Based Perspective
Ruimin Chen et al.
IEEE SENSORS LETTERS (2019)
A Review of Metal Fabricated with Laser- and Powder-Bed Based Additive Manufacturing Techniques: Process, Nomenclature, Materials, Achievable Properties, and its Utilization in the Medical Sector
Leonhard Hitzler et al.
ADVANCED ENGINEERING MATERIALS (2018)
Direct measurements of laser absorptivity during metal melt pool formation associated with powder bed fusion additive manufacturing processes
Manyalibo Matthews et al.
JOURNAL OF LASER APPLICATIONS (2018)
Multifractal Analysis of Image Profiles for the Characterization and Detection of Defects in Additive Manufacturing
Bing Yao et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2018)
In-Process Monitoring of Material Cross-Contamination Defects in Laser Powder Bed Fusion
Mohammad Montazeri et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2018)
Effect of support structures on Ti-6A1-4V overhang parts fabricated by powder bed fusion electron beam additive manufacturing
Xiaoqing Wang et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)
Additive manufacturing: scientific and technological challenges, market uptake and opportunities
Syed A. M. Tofail et al.
MATERIALS TODAY (2018)
Additive manufacturing of metallic components - Process, structure and properties
T. DebRoy et al.
PROGRESS IN MATERIALS SCIENCE (2018)
Constrained Markov Decision Process Modeling for Sequential Optimization of Additive Manufacturing Build Quality
Bing Yao et al.
IEEE ACCESS (2018)
Markov Decision Process for Image-Guided Additive Manufacturing
Bing Yao et al.
IEEE ROBOTICS AND AUTOMATION LETTERS (2018)
Regulatory interfaces surrounding the growing field of additive manufacturing of medical devices and biologic products
Joan E. Adamo et al.
JOURNAL OF CLINICAL AND TRANSLATIONAL SCIENCE (2018)
Thermal near infrared monitoring system for electron beam melting with emissivity tracking
N. Boone et al.
ADDITIVE MANUFACTURING (2018)
Contact-Free Support Structures for Part Overhangs in Powder-Bed Metal Additive Manufacturing
Kenneth Cooper et al.
INVENTIONS (2018)
Assessment of optical emission analysis for in-process monitoring of powder bed fusion additive manufacturing
Alexander J. Dunbar et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2018)
A survey of finite element analysis of temperature and thermal stress fields in powder bed fusion Additive Manufacturing
Zhibo Luo et al.
ADDITIVE MANUFACTURING (2018)
Application of supervised machine learning for defect detection during metallic powder bed fusion additive manufacturing using high resolution imaging
Christian Gobert et al.
ADDITIVE MANUFACTURING (2018)
Invited review article: Metal-additive manufacturing-Modeling strategies for application-optimized designs
Amit Bandyopadhyay et al.
ADDITIVE MANUFACTURING (2018)
A review on measurement science needs for real-time control of additive manufacturing metal powder bed fusion processes
Mahesh Mani et al.
INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2017)
Progress Towards Metal Additive Manufacturing Standardization to Support Qualification and Certification
Mohsen Seifi et al.
JOM (2017)
Classifying the Dimensional Variation in Additive Manufactured Parts From Laser-Scanned Three-Dimensional Point Cloud Data Using Machine Learning Approaches
M. Samie Tootooni et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2017)
Multi-Objective Accelerated Process Optimization of Part Geometric Accuracy in Additive Manufacturing
Amir M. Aboutaleb et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2017)
Process defects and in situ monitoring methods in metal powder bed fusion: a review
Marco Grasso et al.
MEASUREMENT SCIENCE AND TECHNOLOGY (2017)
Dynamic network monitoring and control of in situ image profiles from ultraprecision machining and biomanufacturing processes
Chen Kan et al.
QUALITY AND RELIABILITY ENGINEERING INTERNATIONAL (2017)
Current state and potential of additive - hybrid manufacturing for metal parts
Danielle Strong et al.
RAPID PROTOTYPING JOURNAL (2017)
Additive manufacturing: Toward holistic design
Bradley H. Jared et al.
SCRIPTA MATERIALIA (2017)
Preparing industry for additive manufacturing and its applications: Summary & recommendations from a National Science Foundation workshop
Timothy W. Simpson et al.
ADDITIVE MANUFACTURING (2017)
Application of finite element, phase-field, and CALPHAD-based methods to additive manufacturing of Ni-based superalloys
Trevor Keller et al.
ACTA MATERIALIA (2017)
Modeling of additive manufacturing processes for metals: Challenges and opportunities
M. M. Francois et al.
CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE (2017)
Assessment of Dimensional Integrity and Spatial Defect Localization in Additive Manufacturing Using Spectral Graph Theory
Prahalad K. Rao et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2016)
Laser powder-bed fusion additive manufacturing: Physics of complex melt flow and formation mechanisms of pores, spatter, and denudation zones
Saad A. Khairallah et al.
ACTA MATERIALIA (2016)
Multiscale Modeling of Powder Bed-Based Additive Manufacturing
Matthias Markl et al.
ANNUAL REVIEW OF MATERIALS RESEARCH, VOL 46 (2016)
The metallurgy and processing science of metal additive manufacturing
W. J. Sames et al.
INTERNATIONAL MATERIALS REVIEWS (2016)
Thermographic measurements of the commercial laser powder bed fusion process at NIST
Brandon Lane et al.
RAPID PROTOTYPING JOURNAL (2016)
Review of in-situ process monitoring and in-situ metrology for metal additive manufacturing
Sarah K. Everton et al.
MATERIALS & DESIGN (2016)
In-process sensing in selective laser melting (SLM) additive manufacturing
Thomas G. Spears et al.
INTEGRATING MATERIALS AND MANUFACTURING INNOVATION (2016)
Metal based additive layer manufacturing: variations, correlations and process control
Paul O'Regan et al.
KNOWLEDGE-BASED AND INTELLIGENT INFORMATION & ENGINEERING SYSTEMS: PROCEEDINGS OF THE 20TH INTERNATIONAL CONFERENCE KES-2016 (2016)
Development of experimental method for in situ distortion and temperature measurements during the laser powder bed fusion additive manufacturing process
A. J. Dunbar et al.
ADDITIVE MANUFACTURING (2016)
Effect of process parameters on the surface roughness of overhanging structures in laser powder bed fusion additive manufacturing
Jason C. Fox et al.
3RD CIRP CONFERENCE ON SURFACE INTEGRITY (2016)
A survey of sensing and control systems for machine and process monitoring of directed-energy, metal-based additive manufacturing
Edward W. Reutzel et al.
RAPID PROTOTYPING JOURNAL (2015)
Sequential Exploration of Complex Surfaces Using Minimum Energy Designs
V. Roshan Joseph et al.
TECHNOMETRICS (2015)
Evolution of solidification texture during additive manufacturing
H. L. Wei et al.
SCIENTIFIC REPORTS (2015)
Laser powder bed fusion additive manufacturing of metals; physics, computational, and materials challenges
W. E. King et al.
APPLIED PHYSICS REVIEWS (2015)
Additive Manufacturing: Current State, Future Potential, Gaps and Needs, and Recommendations
Yong Huang et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2015)
Random Markov decision processes for sustainable infrastructure systems
Hadi Meidani et al.
STRUCTURE AND INFRASTRUCTURE ENGINEERING (2015)
Thermographic Process Monitoring in Powderbed Based Additive Manufacturing
Harald Krauss et al.
41ST ANNUAL REVIEW OF PROGRESS IN QUANTITATIVE NONDESTRUCTIVE EVALUATION, VOL 34 (2015)
Heterogeneous recurrence monitoring and control of nonlinear stochastic processes
Hui Yang et al.
CHAOS (2014)
Statistical modal analysis for variation characterization and application in manufacturing quality control
Wenzhen Huang et al.
IIE TRANSACTIONS (2014)
Toward Metamodels for Composable and Reusable Additive Manufacturing Process Models
Paul Witherell et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2014)
A Review on Process Monitoring and Control in Metal-Based Additive Manufacturing
Gustavo Tapia et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2014)
An Integrated Approach to Additive Manufacturing Simulations Using Physics Based, Coupled Multiscale Process Modeling
Deepankar Pal et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2014)
Defect generation and propagation mechanism during additive manufacturing by selective beam melting
A. Bauereiss et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2014)
Infrared Thermography for Laser-Based Powder Bed Fusion Additive Manufacturing Processes
Shawn Moylan et al.
40TH ANNUAL REVIEW OF PROGRESS IN QUANTITATIVE NONDESTRUCTIVE EVALUATION: INCORPORATING THE 10TH INTERNATIONAL CONFERENCE ON BARKHAUSEN NOISE AND MICROMAGNETIC TESTING, VOLS 33A & 33B (2014)
Surface roughness prediction in fused deposition modelling by neural networks
A. Boschetto et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2013)
3D Printing Disrupts Manufacturing How Economies of One Create New Rules of Competition
Irene J. Petrick et al.
RESEARCH-TECHNOLOGY MANAGEMENT (2013)
Intelligent dynamic control of stochastic economic lot scheduling by agent-based reinforcement learning
Jiao Wang et al.
INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2012)
Laser additive manufacturing of metallic components: materials, processes and mechanisms
D. D. Gu et al.
INTERNATIONAL MATERIALS REVIEWS (2012)
Quantitative assessments of geometric errors for rapid prototyping in medical applications
Cristobal Arrieta et al.
RAPID PROTOTYPING JOURNAL (2012)
Innovation, Quality Engineering, and Statistics
George E. P. Box et al.
QUALITY ENGINEERING (2012)
Structured Replacement Policies for Components with Complex Degradation Processes and Dedicated Sensors
Alaa H. Elwany et al.
OPERATIONS RESEARCH (2011)
Speed and accuracy evaluation of additive manufacturing machines
Tomaz Brajlih et al.
RAPID PROTOTYPING JOURNAL (2011)
Predictive Control Considering Model Uncertainty for Variation Reduction in Multistage Assembly Processes
Jing Zhong et al.
IEEE TRANSACTIONS ON AUTOMATION SCIENCE AND ENGINEERING (2010)
Quality control and improvement for multistage systems: A survey
Jianjun Shi et al.
IIE TRANSACTIONS (2009)
Production policies under deteriorating process conditions
Burak Kazaz et al.
IIE TRANSACTIONS (2008)
Pursuing successful rapid manufacturing: a users' best-practices approach
Javier Munguia et al.
RAPID PROTOTYPING JOURNAL (2008)
Dynamic modeling and monitoring of contour crafting - An extrusion-based layered manufacturing process
Satish Bukkapatnam et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2007)
Metrology of freeform shaped parts
E. Savio et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2007)
Advances in three dimensional printing - state of the art and future perspectives
D. Dimitrov et al.
RAPID PROTOTYPING JOURNAL (2006)
Influence of position and laser power on thermal history and microstructure of direct laser fabricated Ti-6Al-4V samples
L Qian et al.
MATERIALS SCIENCE AND TECHNOLOGY (2005)
Using the six-sigma metric to measure and improve the performance of a supply chain
T Dasgupta
TOTAL QUALITY MANAGEMENT & BUSINESS EXCELLENCE (2003)
Robust parameter design of multiple-target systems
VR Joseph et al.
TECHNOMETRICS (2002)
Computer aided decision support for fused deposition modeling
CW Ziemian et al.
RAPID PROTOTYPING JOURNAL (2001)
分享论文
