相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Numerical and experimental investigations of instability in a spouted bed with non-spherical particles
Tianyu Wang et al.
POWDER TECHNOLOGY (2021)
Gas-solid mixing and heat transfer performance in alternating spout deflection
Yuanhe Yue et al.
CHEMICAL ENGINEERING SCIENCE (2021)
Particle shape effects on dynamic behaviors in a spouted bed: CFD-DEM study
Xuejiao Liu et al.
POWDER TECHNOLOGY (2020)
Numerical study of gas-solid flow behaviors in the air reactor of coal-direct chemical looping combustion with Geldart D particles
Shuyue Li et al.
POWDER TECHNOLOGY (2020)
Modelling of the pyrolysis of low-rank-coal briquettes in an industrial-scale gas heat carrier pyrolyzer
Yuting Zhuo et al.
POWDER TECHNOLOGY (2020)
Coarse-grained DEM study of solids sedimentation in water
Zhouzun Xie et al.
POWDER TECHNOLOGY (2020)
Flexible discretization technique for DEM-CFD simulations including thin walls
Kazuya Takabatake et al.
ADVANCED POWDER TECHNOLOGY (2020)
Three-dimensional transient modelling of coal and coke co-combustion in the dynamic raceway of ironmaking blast furnaces
Yuting Zhuo et al.
APPLIED ENERGY (2020)
Experimental investigation of fountain height in a shallow rectangular spouted bed using digital image analysis
Jingsi Yang et al.
CHEMICAL ENGINEERING JOURNAL (2020)
New operation regimes in fountain confined conical spouted beds
Mikel Tellabide et al.
CHEMICAL ENGINEERING SCIENCE (2020)
Particle-scale characteristics of the three distinct regions in the multi-chamber slot-rectangular spouted bed
Shiliang Yang et al.
POWDER TECHNOLOGY (2020)
CFD-DEM study of effects of particle density on spout deflection behavior in a spout fluidized bed
Yuanhe Yue et al.
POWDER TECHNOLOGY (2020)
Numerical Study on the Gas-Solid Flow in a Spouted Bed Installed with a Controllable Nozzle and a Swirling Flow Generator
Feng Wu et al.
ACS OMEGA (2020)
CFD-DEM coupled with thermochemical sub-models for biomass gasification: Validation and sensitivity analysis
Shuai Wang et al.
CHEMICAL ENGINEERING SCIENCE (2020)
Continuum theory for dense gas-solid flow: A state-of-the-art review
Junwu Wang
CHEMICAL ENGINEERING SCIENCE (2020)
Numerical and experimental study of integral multi -jet structure impact on gas -solid flow in a 3D spout -fluidized bed
Feng Wu et al.
CHEMICAL ENGINEERING JOURNAL (2020)
Experimental Investigation of Spout Deflection in a Rectangular Spouted Bed by the PIV Method
Yuanhe Yue et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2020)
CFD-DEM study of biomass gasification in a fluidized bed reactor: Effects of key operating parameters
Shuai Wang et al.
RENEWABLE ENERGY (2020)
Drying of pasty and granular materials in mechanically and conventional spouted beds
Robson C. Sousa et al.
PARTICUOLOGY (2019)
Surface-to-bed heat transfer for high-density particles in conical spouted and spout-fluid beds
Onur Yaman et al.
PARTICUOLOGY (2019)
Fine particle entrainment in fountain confined conical spouted beds
I. Estiati et al.
POWDER TECHNOLOGY (2019)
Detecting stability of conical spouted beds based on information entropy theory
Chiya Savari et al.
POWDER TECHNOLOGY (2019)
Investigation of hydrodynamics of binary solids mixture spouted beds using radioactive particle tracking (RPT) technique
Thaar Al-Juwaya et al.
CHEMICAL ENGINEERING RESEARCH & DESIGN (2019)
A review on pulsed flow in gas-solid fluidized beds and spouted beds: Recent work and future outlook
Maysam Saidi et al.
ADVANCED POWDER TECHNOLOGY (2019)
Particle-scale study of spout deflection in a flat-bottomed spout fluidized bed
Yuanhe Yue et al.
CHEMICAL ENGINEERING SCIENCE (2019)
A combined numerical and experimental approach to study the carbonization of low-rank coal ellipsoidal briquettes
Yuting Zhuo et al.
CHEMICAL ENGINEERING SCIENCE (2019)
Influence of binary and ternary particle systems on the spouting stability in a three-dimensional prismatic spouted bed
S. Pietsch et al.
POWDER TECHNOLOGY (2019)
Experimental study on flow characterization of a rectangular spouted bed by image processing
J. Yang et al.
POWDER TECHNOLOGY (2019)
Influence of a sound field on the flow pattern of hollow microbeads in a spout-fluidized bed with a draft tube
Wei Gu et al.
POWDER TECHNOLOGY (2019)
A novel low-frequency microwave assisted pulse-spouted bed freeze-drying of Chinese yam
Linlin Li et al.
FOOD AND BIOPRODUCTS PROCESSING (2019)
Influence of the fountain confiner in a conical spouted bed dryer
I. Estiati et al.
POWDER TECHNOLOGY (2019)
Simulation of coal pressurized pyrolysis process in an industrial-scale spout-fluid bed reactor
Guanwen Zhou et al.
ADVANCED POWDER TECHNOLOGY (2019)
A comprehensive study of sawdust torrefaction in a dual-compartment slot-rectangular spouted bed reactor
Ziliang Wang et al.
ENERGY (2019)
Particle-Scale Study of the Effect of Operating Conditions on Spout Deflection Behavior in a Flat-Bottomed Spout-Fluidized Bed
Yuanhe Yue et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2019)
CFD-DEM modelling of circulation frequencies and residence times in a prismatic spouted bed
Swantje Pietsch et al.
CHEMICAL ENGINEERING RESEARCH & DESIGN (2018)
Investigation of Void Fraction Schemes for Use with CFD-DEM Simulations of Fluidized Beds
Daniel A. Clarke et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2018)
Influences of the fluidizing and spouting pulsation on particle motion in spout-fluid beds
Maysam Saidi et al.
PARTICUOLOGY (2018)
Determination of flow patterns by a novel image analysis technique in a rectangular spouted bed
Jingsi Yang et al.
POWDER TECHNOLOGY (2018)
Impact of operating parameters on biomass gasification in a fluidized bed reactor: An Eulerian-Lagrangian approach
Shuai Wang et al.
POWDER TECHNOLOGY (2018)
A new fountain confinement device for fluidizing fine and ultrafine sands in conical spouted beds
Aitor Pablos et al.
POWDER TECHNOLOGY (2018)
Hydrodynamics, numerical study and application of spouted bed
Zohreh Rahimi-Ahar et al.
REVIEWS IN CHEMICAL ENGINEERING (2018)
Hydrodynamic characteristics of sawdust in a pulsed slot-rectangular spouted bed
Hideki Takeuchi et al.
POWDER TECHNOLOGY (2018)
Modelling of Spouted and Spout-Fluid Beds: Key for Their Successful Scale Up
Cristina Moliner et al.
ENERGIES (2017)
An advanced evaluatidn of spouted beds scale-up for coating TRISO nuclear fuel particles using Radioactive Particle Tracking (RPT)
Neven Ali et al.
EXPERIMENTAL THERMAL AND FLUID SCIENCE (2017)
Assessment of a conical spouted with an enhanced fountain bed for biomass gasification
G. Lopez et al.
FUEL (2017)
CFD-DEM simulation of a conical spouted bed with open-sided draft tube containing fine particles
Bayazid Mahmoodi et al.
JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2017)
Mixing and segregation of solid particles in a conical spouted bed: Effect of particle size and density
M. Kiani et al.
PARTICUOLOGY (2017)
Experimental investigation on gas-solid hydrodynamics of coarse particles in a two-dimensional spouted bed
He Zhang et al.
POWDER TECHNOLOGY (2017)
Fountain confined conical spouted beds
Haritz Altzibar et al.
POWDER TECHNOLOGY (2017)
Statistical and frequency analysis of pressure fluctuation in an annular spouted bed of coarse particles
Hanyang Gao et al.
POWDER TECHNOLOGY (2017)
CFD-DEM study of the effect of cyclone arrangements on the gas-solid flow dynamics in the full-loop circulating fluidized bed
Shuai Wang et al.
CHEMICAL ENGINEERING SCIENCE (2017)
Hydrodynamics of a slot-rectangular spouted bed of biomass particles with simultaneous injection of spouting and pulsating air streams
Maria Regina Parise et al.
CHEMICAL ENGINEERING JOURNAL (2017)
Hydrodynamic behavior of silicon particles with a wide size distribution in a draft tube spout-fluid bed
Yuemei Zhang et al.
CHEMICAL ENGINEERING JOURNAL (2017)
Hydrodynamics of slot-rectangular spouted beds: Process intensification
Shahab Golshan et al.
CHEMICAL ENGINEERING RESEARCH & DESIGN (2017)
Impact of draft plate on the inter-chamber interaction in a two-chamber spout-fluid bed
Shiliang Yang et al.
APPLIED THERMAL ENGINEERING (2017)
Modeling of Internal State and Performance of an Ironmaking Blast Furnace: Slot vs Sector Geometries
Yansong Shen et al.
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2016)
Numerical investigation on the effect of draft plates on spouting stability and gas-solid characteristics in a spout-fluid bed
Shiliang Yang et al.
CHEMICAL ENGINEERING SCIENCE (2016)
Particle Velocity, Solids Hold-Up, and Solids Flux Distributions in Conical Spouted Beds Operating with Heavy Particles
Gorkem Kulah et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2016)
Modelling of injecting a ternary coal blend into a model ironmaking blast furnace
Y. S. Shen et al.
MINERALS ENGINEERING (2016)
Computational evaluation of depth effect on the hydrodynamics of slot-rectangular spouted bed
Kunzan Qiu et al.
POWDER TECHNOLOGY (2016)
Investigations on the spouting stability in a prismatic spouted bed and apparatus optimization
Vitalij Salikov et al.
ADVANCED POWDER TECHNOLOGY (2015)
Influence of contactor geometry and draft tube configuration on the cycle time distribution in sawdust conical spouted beds
Juan F. Saldarriaga et al.
CHEMICAL ENGINEERING RESEARCH & DESIGN (2015)
Hydrodynamic and Mixing Characteristics of Gas-Solid Flow in a Pulsed Spouted Bed
Maysam Saidi et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2015)
Experimental and numerical investigations of a pseudo-2D spout fluidized bed with draft plates
Vinayak S. Sutkar et al.
POWDER TECHNOLOGY (2015)
Flow structure characterization in conical spouted beds using pressure fluctuation signals
Navid Mostoufi et al.
POWDER TECHNOLOGY (2015)
Characterization and CFD-DEM modelling of a prismatic spouted bed
Vitalij Salikov et al.
POWDER TECHNOLOGY (2015)
Flow regime transition and hydrodynamics of spouted beds with binary mixtures
Wei Du et al.
POWDER TECHNOLOGY (2015)
Styrene recovery from polystyrene by flash pyrolysis in a conical spouted bed reactor
Maite Artetxe et al.
WASTE MANAGEMENT (2015)
Slot-Rectangular Spouted Bed: Hydrodynamic Stability and Effects of Operating Conditions on Drying Performance
Matheus B. Braga et al.
DRYING TECHNOLOGY (2015)
Effects of Operating Parameters on Hydrodynamic Behavior of Spout-Fluid Beds without and with a Draft Tube
Hiroshi Nagashima et al.
NEW PARADIGM OF PARTICLE SCIENCE AND TECHNOLOGY, PROCEEDINGS OF THE 7TH WORLD CONGRESS ON PARTICLE TECHNOLOGY (2015)
Influence of void fraction calculation on fidelity of CFD-DEM simulation of gas-solid bubbling fluidized beds
Zhengbiao Peng et al.
AICHE JOURNAL (2014)
Study on the flow behavior in spout-fluid bed with a draft tube of sub-millimeter grade silicon particles
Guoliang Su et al.
CHEMICAL ENGINEERING JOURNAL (2014)
Parallel CFD-DEM modeling of the hydrodynamics in a lab-scale double slot-rectangular spouted bed with a partition plate
Shiliang Yang et al.
CHEMICAL ENGINEERING JOURNAL (2014)
Operating and Peak Pressure Drops in Conical Spouted Beds Equipped with Draft Tubes of Different Configuration
Haritz Altzibar et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2014)
Hydrodynamic Performance of a Spout-Fluid Bed with Draft Tube at Different Temperatures
Man Wu et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2014)
CFD study of particle velocity profiles inside a draft tube in a cylindrical spouted bed with conical base
Seyyed Hossein Hosseini et al.
JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2014)
Study on gas-solid flow behaviors in a spouted bed at elevated pressure: Numerical simulation aspect
Xiaofeng Jiang et al.
POWDER TECHNOLOGY (2014)
Experimental investigations of a pseudo-2D spout fluidized bed with draft plates
Vinayak S. Sutkar et al.
CHEMICAL ENGINEERING SCIENCE (2013)
Spout fluidized beds: Recent advances in experimental and numerical studies
Vinayak S. Sutkar et al.
CHEMICAL ENGINEERING SCIENCE (2013)
Numerical Simulation of a Spouted Bed Using Computational Fluid Dynamics (CFD)
C. H. Zhang et al.
DRYING TECHNOLOGY (2013)
Particle Cycle Times and Solid Circulation Rates in Conical Spouted Beds with Draft Tubes of Different Configuration
H. Altzibar et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2013)
Hydrodynamic performance of spouted beds with different types of draft tubes
Hiroshi Nagashima et al.
PARTICUOLOGY (2013)
Effect of the acidity of the HZSM-5 zeolite catalyst on the cracking of high density polyethylene in a conical spouted bed reactor
G. Elordi et al.
APPLIED CATALYSIS A-GENERAL (2012)
Assessment of Stability of Spouted Bed Using Pressure Fluctuation Analysis
Palash Kumar Mollick et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2012)
STABILITY OF SLOT-RECTANGULAR SPOUTED BEDS: EFFECT OF SLOT CONFIGURATION
Z. Chen et al.
CANADIAN JOURNAL OF CHEMICAL ENGINEERING (2011)
Numerical and experimental study on multiple-spout fluidized beds
Maureen S. van Buijtenen et al.
CHEMICAL ENGINEERING SCIENCE (2011)
An experimental study of the effect of collision properties on spout fluidized bed dynamics
Maureen S. van Buijtenen et al.
POWDER TECHNOLOGY (2011)
Validation of a Discrete Particle Model in a 2D Spout-Fluid Bed Using Non-Intrusive Optical Measuring Techniques
Jeroen Link et al.
CANADIAN JOURNAL OF CHEMICAL ENGINEERING (2010)
Flow Characteristics in Slot-Rectangular Spouted Beds with Draft Plates
Baolin Luo et al.
CANADIAN JOURNAL OF CHEMICAL ENGINEERING (2010)
Identification of Flow Regimes in Slot-Rectangular Spouted Beds using Pressure Fluctuations
Luis A. P. Freitas et al.
CANADIAN JOURNAL OF CHEMICAL ENGINEERING (2010)
Hydrodynamic simulations of gas-solid spouted bed with a draft tube
Wang Shuyan et al.
CHEMICAL ENGINEERING SCIENCE (2010)
Analysis of spouted bed pressure fluctuations during particle coating
N. E. C. Lopes et al.
CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2009)
A three-dimensional numerical study of the combustion of coal blends in blast furnace
Y. S. Shen et al.
FUEL (2009)
Characterization of the pneumatic behavior of a novel spouted bed apparatus with two adjustable gas inlets
O. Gryczka et al.
CHEMICAL ENGINEERING SCIENCE (2008)
Characterization of spouted bed regimes using pressure fluctuation signals
E. Piskova et al.
CHEMICAL ENGINEERING SCIENCE (2008)
A draft-tube conical spouted bed for drying fine particles
H. Altzibar et al.
DRYING TECHNOLOGY (2008)
DEM simulation of the particle dynamics in two-dimensional spouted beds
X-L. Zhao et al.
POWDER TECHNOLOGY (2008)
Flow patterns of solids in a two-dimensional spouted bed with draft plates: PIV measurement and DEM simulations
X-L. Zhao et al.
POWDER TECHNOLOGY (2008)
CFD modeling of the gas-particle flow behavior in spouted beds
Wu Zhonghua et al.
POWDER TECHNOLOGY (2008)
Granular temperature:: Comparison of Magnetic Resonance measurements with Discrete Element Model simulations
C. R. Mueller et al.
POWDER TECHNOLOGY (2008)
Operating conditions of conical spouted beds with a draft tube.: Effect of the diameter of the draft tube and of the height of entrainment zone
Maria J. San Jose et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2007)
Flow pattern and transition of rectangular spout-fluid bed
Wenqi Zhong et al.
CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2006)
Minimum spouting velocity for the pyrolysis of scrap tyres with sand in conical spouted beds
Martin Olazar et al.
POWDER TECHNOLOGY (2006)
Hydrodynamic study of fine metallic powders in an original spouted bed contactor in view of chemical vapor deposition treatments
Brigitte Caussat et al.
POWDER TECHNOLOGY (2006)
Solid cross-flow into the spout and particle trajectories in conical spouted beds consisting of solids of different density and shape
M. J. San Jose et al.
CHEMICAL ENGINEERING RESEARCH & DESIGN (2006)
DEM simulation of gas-solid flow behaviors in spout-fluid bed
WQ Zhong et al.
CHEMICAL ENGINEERING SCIENCE (2006)
Pressure fluctuation frequency characteristics in a spout-fluid bed by modem ARM power spectrum analysis
WQ Zhong et al.
POWDER TECHNOLOGY (2005)
Statistical and frequency analysis of pressure fluctuations in spouted beds
JA Xu et al.
POWDER TECHNOLOGY (2004)
Catalytic cracking of gas oils in electromagnetic fields: reactor design and performance
SI Al-Mayman et al.
FUEL PROCESSING TECHNOLOGY (2003)
Some hydrodynamic and mixing characteristics of a pulsed spouted bed dryer
S Devahastin et al.
POWDER TECHNOLOGY (2001)
Gas spouting hydrodynamics of fine particles
SN Wang et al.
CANADIAN JOURNAL OF CHEMICAL ENGINEERING (2000)
Drying experiments with AlO(OH) suspension of high purity and fine particulate size to design an industrial scale dryer
T Szentmarjay et al.
DRYING TECHNOLOGY (2000)
Hydrodynamics and stability of slot-rectangular spouted beds. Part I: Thin bed
OM Dogan et al.
CHEMICAL ENGINEERING COMMUNICATIONS (2000)
分享论文
