相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Influence of nanosilica particles on the high-temperature performance of waste denim fibre-modified bitumen
Abdulnaser M. Al-Sabaeei et al.
INTERNATIONAL JOURNAL OF PAVEMENT ENGINEERING (2022)
Influence of Stacking Sequence on the Mechanical and Water Absorption Characteristics of Areca Sheath-palm Leaf Sheath Fibers Reinforced Epoxy Composites
Saikrishnan Ganesh et al.
JOURNAL OF NATURAL FIBERS (2022)
Physico-mechanical Properties of Unsaturated Polyester Resin Reinforced Maize Cob and Jute Fiber Composites
Jamila B. Ali et al.
JOURNAL OF NATURAL FIBERS (2022)
Crop Residues as Potential Sustainable Precursors for Developing Silica Materials: A Review
Wahyu Kamal Setiawan et al.
WASTE AND BIOMASS VALORIZATION (2021)
Food loss and food waste recovery as animal feed: a systematic review
Caroline Rajeh et al.
JOURNAL OF MATERIAL CYCLES AND WASTE MANAGEMENT (2021)
Eco-Sustainability of the Textile Production: Waste Recovery and Current Recycling in the Composites World
Antonella Patti et al.
POLYMERS (2021)
Alumina Recovery from Industrial Waste: Study on the Thermal, Tensile and Wear Properties of Polypropylene/Alumina Nanocomposites
Anis Sofia Sufian et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY (2020)
Preparation and characterization of silica nanoparticles from sugarcane bagasse ash for using as a filler in natural rubber composites
Anupong Boonmee et al.
POLYMER BULLETIN (2020)
Recycling of denim fabric wastes into high-performance composites using the needle-punching nonwoven fabrication route
Xue Meng et al.
TEXTILE RESEARCH JOURNAL (2020)
Fabrication of biocomposite membrane with microcrystalline cellulose (MCC) extracted from sugarcane bagasse by phase inversion method
Satita Thiangtham et al.
CELLULOSE (2020)
Cellulose nanomaterials: new generation materials for solving global issues
T. C. Mokhena et al.
CELLULOSE (2020)
Technological and environmental comparative of the processing of primary sludge waste from paper industry for mortar
Afonso Rangel Garcez de Azevedo et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Recycling of an Agricultural Bio-waste as a Novel Cellulose Aerogel: A Green Chemistry Study
Mehmet Kaya et al.
JOURNAL OF POLYMERS AND THE ENVIRONMENT (2020)
An innovative approach to utilize waste silica fume from zirconia industry to prepare high performance natural rubber composites for multi-functional applications
P. Dileep et al.
POLYMER TESTING (2020)
Fabrication of recyclable magnetic double-base aerogel with waste bioresource bagasse as the source of fiber for the enhanced removal of chromium ions from aqueous solution
Hui Liu et al.
FOOD AND BIOPRODUCTS PROCESSING (2020)
Application of Cellulose Nanofibrils Isolated from an Agroindustrial Residue of Peach Palm in Cassava Starch Films
Mariana Pereira Martins et al.
FOOD BIOPHYSICS (2020)
Thermal and mechanical properties of poly(3-hydroxybutyrate) reinforced with cellulose fibers from wood waste
Denis Mihaela Panaitescu et al.
INDUSTRIAL CROPS AND PRODUCTS (2020)
Pyrolysis of plastic waste: Opportunities and challenges
Muhammad Saad Qureshi et al.
JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2020)
Preparation and properties of bio-geopolymer composites with waste cotton stalk materials
Boyu Zhou et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Dregs and grits from kraft pulp mills incorporated to Portland cement clinker
Caio Moreira Miquelino Eleto Torres et al.
JOURNAL OF MATERIAL CYCLES AND WASTE MANAGEMENT (2020)
Heat and sound insulation applications of pineapple aerogels from pineapple waste
Nga H. N. Do et al.
MATERIALS CHEMISTRY AND PHYSICS (2020)
Properties Investigation of novel nitrile rubber composites with rockwool fibers
Elisson Brum Dutra da Rocha et al.
POLYMER TESTING (2020)
Natural rubber composites reinforced with Dregs residue from cellulose Kraft industry
Nathalia Leite Bittencourt et al.
PROGRESS IN RUBBER PLASTICS AND RECYCLING TECHNOLOGY (2020)
Cradle-to-cradle approach to waste tyres and development of silica based green tyre composites
Joyeeta Ghosh et al.
RESOURCES CONSERVATION AND RECYCLING (2020)
Waste Rubber Recycling: A Review on the Evolution and Properties of Thermoplastic Elastomers
Ali Fazli et al.
MATERIALS (2020)
Biocarbon from peanut hulls and their green composites with biobased poly(trimethylene terephthalate) (PTT)
Maisyn Picard et al.
SCIENTIFIC REPORTS (2020)
Effect of Various Surface Treatments on the Performance of Jute Fibers Filled Natural Rubber (NR) Composites
Kumarjyoti Roy et al.
POLYMERS (2020)
Regeneration of native collagen from hazardous waste: chrome-tanned leather shavings by acid method
Zhenhua Tian et al.
ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2020)
Utilization of Municipal Plastic and Wood Waste in Industrial Manufacturing of Wood Plastic Composites
Dildare Basalp et al.
WASTE AND BIOMASS VALORIZATION (2020)
Impact Damage Resistance and Post-Impact Tolerance of Optimum Banana-Pseudo-Stem-Fiber-Reinforced Epoxy Sandwich Structures
Mohamad Zaki Hassan et al.
APPLIED SCIENCES-BASEL (2020)
Cellulose nanofibril-based aerogel derived from sago pith waste and its application on methylene blue removal
Jeng Hua Beh et al.
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2020)
Eco-friendly recycled polypropylene matrix composites incorporated with geopolymer concrete waste particles
Flowio James Humberto Tommasini Vieira Ramos et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
Recycled low-density polyethylene composite to mitigate the environmental impacts generated from coal mining waste in Brazil
Marcelo Gryczak et al.
JOURNAL OF ENVIRONMENTAL MANAGEMENT (2020)
Natural rubber composites with Grits waste from cellulose industry
Giovani B. Bacarin et al.
JOURNAL OF MATERIAL CYCLES AND WASTE MANAGEMENT (2020)
Determination of Some Technological Properties of Injection Molded Pulverized-HDPE Based Composites Reinforced with Micronized Waste Tire Powder and Red Pine Wood Wastes
Ibrahim Halil Basboga et al.
JOURNAL OF POLYMERS AND THE ENVIRONMENT (2020)
Nanocellulose from Industrial and Agricultural Waste for Further Use in PLA Composites
Alana G. de Souza et al.
JOURNAL OF POLYMERS AND THE ENVIRONMENT (2020)
Effects of Chemically Treated Eucalyptus Fibers on Mechanical, Thermal and Insulating Properties of Polyurethane Composite Foams
Sylwia Czlonka et al.
MATERIALS (2020)
Acoustic, Mechanical and Thermal Properties of Green Composites Reinforced with Natural Fibers Waste
Tufail Hassan et al.
POLYMERS (2020)
Utilization ofWaste Bamboo Fibers in Thermoplastic Composites: Influence of the Chemical Composition and Thermal Decomposition Behavior
Chin-Hao Yeh et al.
POLYMERS (2020)
Natural Rubber-Based Elastomer Reinforced by Chemically Modified Multiscale Leather Collagen Fibers with Excellent Toughness
Shuangyang Li et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2020)
Effective Thermal-Oxidative Reclamation of Waste Tire Rubbers for Producing High-Performance Rubber Composites
Yuxin Zhang et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2020)
Bi-Layered Porous/Cork-Containing Waste-Based Inorganic Polymer Composites: Innovative Material towards Green Buildings
Rui M. Novais et al.
APPLIED SCIENCES-BASEL (2020)
Renewable natural resources reinforced polyurethane foam for use of lightweight thermal insulation
Huijuan Shao et al.
MATERIALS RESEARCH EXPRESS (2020)
Using agricultural residues for sustainable transportation biofuels in 2050: Case of West Africa
Edgard Gnansounou et al.
BIORESOURCE TECHNOLOGY (2020)
The potential of flax shives as reinforcements for injection moulded polypropylene composites
Lucile Nuez et al.
INDUSTRIAL CROPS AND PRODUCTS (2020)
Nanocellulose: From an agricultural waste to a valuable pharmaceutical ingredient
Rabab Kamel et al.
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2020)
Effect of agro waste α-cellulosic micro filler on mechanical and thermal behavior of epoxy composites
K. J. Nagarajan et al.
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2020)
Lignin to Materials: A Focused Review on Recent Novel Lignin Applications
Osbert Yu et al.
APPLIED SCIENCES-BASEL (2020)
A review on municipal solid waste as a renewable source for waste-to-energy project in India: Current practices, challenges, and future opportunities
Lal Chand Malav et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Green-composites produced from waste residue in pulp and paper industry: A sustainable way to manage industrial wastes
Qingfa Zhang et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Procuring the nano-scale lignin in prehydrolyzate as ingredient to prepare cellulose nanofibril composite film with multiple functions
Caoxing Huang et al.
CELLULOSE (2020)
Monitoring of mechanical performances of flax non-woven biocomposites during a home compost degradation
Delphin Pantaloni et al.
POLYMER DEGRADATION AND STABILITY (2020)
Transforming Marble Waste into High-Performance, Water-Resistant, and Thermally Insulative Hybrid Polymer Composites for Environmental Sustainability
Payal Bakshi et al.
POLYMERS (2020)
Green aerogels from rice straw for thermal, acoustic insulation and oil spill cleaning applications
Du Tuan Tran et al.
MATERIALS CHEMISTRY AND PHYSICS (2020)
Preparation and characterization of a novel green silica/PVA membrane for water desalination by pervaporation
Danielli Alessandra Reino Olegario da Silva et al.
SEPARATION AND PURIFICATION TECHNOLOGY (2020)
Steam-exploded fibers of almond tree leaves as reinforcement of novel recycled polypropylene composites
Cinthya H. S. Souza Rosa et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
Recycling of waste tire fibers into advanced aerogels for thermal insulation and sound absorption applications
Quoc Ba Thai et al.
JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2020)
Study on morphology and mechanical behavior of areca leaf sheath reinforced epoxy composites
R. B. Ashok et al.
ADVANCED COMPOSITES AND HYBRID MATERIALS (2020)
Characterization of banana fiber-reinforced polypropylene composites
D. Mahesh et al.
JOURNAL OF THE INDIAN ACADEMY OF WOOD SCIENCE (2020)
Studies on durability of sustainable biobased composites: a review
Boon Peng Chang et al.
RSC ADVANCES (2020)
Sound absorption performance of needle-punched nonwovens and their composites with perforated rubber
Chureerat Prahsarn et al.
SN APPLIED SCIENCES (2020)
The environmental price of fast fashion
Kirsi Niinimaki et al.
NATURE REVIEWS EARTH & ENVIRONMENT (2020)
Impact of hybrid composites based on rubber tyres particles and sugarcane bagasse fibres
Sergio Luiz Moni Ribeiro Filho et al.
COMPOSITES PART B-ENGINEERING (2019)
Novel insight into adsorption and co-adsorption of heavy metal ions and an organic pollutant by magnetic graphene nanomaterials in water
Dan Huang et al.
CHEMICAL ENGINEERING JOURNAL (2019)
Optimization of heavy metal biosorption onto freshwater algae (Chlorella coloniales) using response surface methodology (RSM)
Jalil Jaafari et al.
CHEMOSPHERE (2019)
The effect of the use of construction and demolition waste on the mechanical and moisture properties of a wood-plastic composite
Marko Hyvarinen et al.
COMPOSITE STRUCTURES (2019)
Poly(lactic acid) biocomposites with mango waste and organo-montmorillonite for packaging
Edla Maria Bezerra Lima et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2019)
Effect of different waste filler and silane coupling agent on the mechanical properties of powder-resin composite
Heriyanto et al.
JOURNAL OF CLEANER PRODUCTION (2019)
Molecular mechanism of anionic dyes adsorption on cationized rice husk cellulose from agricultural wastes
Zhihong Jiang et al.
JOURNAL OF MOLECULAR LIQUIDS (2019)
Optimal synthesis of oxidized mesoporous carbons for the adsorption of heavy metal ions
Michal Marciniak et al.
JOURNAL OF MOLECULAR LIQUIDS (2019)
Effect of Rice Husk Derived Nanosilica on the Structure, Properties and Biodegradability of Corn-Starch/LDPE Composites
Deepshikha Datta et al.
JOURNAL OF POLYMERS AND THE ENVIRONMENT (2019)
Fabrication of waste bagasse fiber-reinforced epoxy composites: Study of physical, mechanical, and erosion properties
Tej Singh et al.
POLYMER COMPOSITES (2019)
Towards understanding the role of peroxide initiators on compatibilization efficiency of thermoplastic elastomers highly filled with reclaimed GTR
Aleksander Hejna et al.
POLYMER TESTING (2019)
Heavy Metal Soil Contamination Detection Using Combined Geochemistry and Field Spectroradiometry in the United Kingdom
Salim Lamine et al.
SENSORS (2019)
Novel epoxidized natural rubber composites with geopolymers from fly ash waste
Hassarutai Yangthong et al.
WASTE MANAGEMENT (2019)
Agricultural water pollution: key knowledge gaps and research needs
Alexandra E. V. Evans et al.
CURRENT OPINION IN ENVIRONMENTAL SUSTAINABILITY (2019)
The Research of Selected Properties and Structure of Polymeric Material Modified with Hard Coal Ash
A. Gnatowski et al.
ACTA PHYSICA POLONICA A (2019)
Preparation and characterization of cellulose nanofibrils from coconut coir fibers and their reinforcements in biodegradable composite films
Jun Wu et al.
CARBOHYDRATE POLYMERS (2019)
Analysis of the presence of anti-inflammatories drugs in surface water: A case study in Beberibe river - PE, Brazil
Tatiane Barbosa Veras et al.
CHEMOSPHERE (2019)
Surface water pollution by pharmaceuticals and an alternative of removal by low-cost adsorbents
Heloise Beatriz Quesada et al.
CHEMOSPHERE (2019)
Characterization of bio-carbon and ligno-cellulosic fiber reinforced bio-composites with compatibilizer
Dilpreet S. Bajwa et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Heavy metals in food crops: Health risks, fate, mechanisms, and management
Prabhat Kumar Rai et al.
ENVIRONMENT INTERNATIONAL (2019)
Foam extrusion of polypropylene-rice husk composites using CO2 as the blowing agent
Shu-Kai Yeh et al.
JOURNAL OF CELLULAR PLASTICS (2019)
Waste marble dust-filled glass fiber-reinforced polymer composite Part I: Physical, thermomechanical, and erosive wear properties
Mahavir Choudhary et al.
POLYMER COMPOSITES (2019)
Application of sunflower husk, hazelnut shell and walnut shell as waste agricultural fillers for epoxy-based composites: A study into mechanical behavior related to structural and rheological properties
Mateusz Barczewski et al.
POLYMER TESTING (2019)
Valorization of industrial paper waste by isolating cellulose nanostructures with different pretreatment methods
Alana Gabrieli de Souza et al.
RESOURCES CONSERVATION AND RECYCLING (2019)
Microplastics in freshwaters and drinking water: Critical review and assessment of data quality
Albert A. Koelmans et al.
WATER RESEARCH (2019)
3D printed cork/polyurethane composite foams
N. Gama et al.
MATERIALS & DESIGN (2019)
Sound Insulation Performance of Short Cotton Fibre Waste/Recycled Acrylonitrile Butadiene Styrene Composites
Y. Can
ACTA PHYSICA POLONICA A (2019)
The Heavy Metals Pollution Index and Water Quality Monitoring of the Zarrineh River, Iran
Maryam Khalilzadeh Poshtegal et al.
ENVIRONMENTAL & ENGINEERING GEOSCIENCE (2019)
The study of the properties of carbonized cassava cortex/epoxy composite for electrical insulation
A. D. Omah et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
N/S doped highly porous magnetic carbon aerogel derived from sugarcane bagasse cellulose for the removal of bisphenol-A
Tansir Ahamad et al.
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2019)
Construction and demolition waste as a raw material for wood polymer composites - Assessment of environmental impacts
Miia Liikanen et al.
JOURNAL OF CLEANER PRODUCTION (2019)
Study on the removal of chromium(III) from leather waste by a two-step method
Li Wang et al.
JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2019)
Onsite paper-type colorimetric detector with enhanced sensitivity for alkali ion via polydiacetylene-nanoporous rice husk silica composites
Sinae Song et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2019)
Treatment and utilization of dairy industrial waste: A review
Talha Ahmad et al.
TRENDS IN FOOD SCIENCE & TECHNOLOGY (2019)
Rapid assessment of heavy metal pollution using ion-exchange resin sachets and micro-XRF core-scanning
Jyh-Jaan S. Teven Huang et al.
SCIENTIFIC REPORTS (2019)
Natural Rubber Composites Filled with Crop Residues as an Alternative to Vulcanizates with Common Fillers
Marcin Maslowski et al.
POLYMERS (2019)
Optimization of tensile behavior of banana pseudo-stem (Musa acuminate) fiber reinforced epoxy composites using response surface methodology
Mohamad Zaki Hassan et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2019)
Recycled construction and demolition waste as a possible source of materials for composite manufacturing
Petri Sormunen et al.
JOURNAL OF BUILDING ENGINEERING (2019)
Characterization of silane treated and untreated natural cellulosic fibre from corn stalk waste as potential reinforcement in polymer composites
Yucheng Liu et al.
CARBOHYDRATE POLYMERS (2019)
A green strategy for simultaneous Cu(II)-EDTA decomplexation and Cu precipitation from water by bicarbonate-activated hydrogen peroxide/chemical precipitation
Tiecheng Wang et al.
CHEMICAL ENGINEERING JOURNAL (2019)
Sustainable thermal insulation biocomposites from rice husk, wheat husk, wood fibers and textile waste fibers: Elaboration and performances evaluation
Rajendran Muthuraj et al.
INDUSTRIAL CROPS AND PRODUCTS (2019)
Biodegradable composites of recycled thermoplastic starch and sawdust: the effect of cellulose nanofibers, nanoclay and temperature
Salomeh E. Saieh et al.
IRANIAN POLYMER JOURNAL (2019)
Permeable Water-Resistant Heat Insulation Panel Based on Recycled Materials and Its Physical and Mechanical Properties
Stepan Hysek et al.
MOLECULES (2019)
Structure-Property Relationships in Polyethylene-Based Composites Filled with Biochar Derived from Waste Coffee Grounds
Rossella Arrigo et al.
POLYMERS (2019)
Effect of sugar palm nanofibrillated cellulose concentrations on morphological, mechanical and physical properties of biodegradable films based on agro-waste sugar palm (Arenga pinnata (Wurmb.) Merr) starch
R. A. Ilyas et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2019)
Properties and utilizations of waste tire rubber in concrete: A review
Ayesha Siddika et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
A concise review of current lignin production, applications, products and their environmental impact
D. S. Bajwa et al.
INDUSTRIAL CROPS AND PRODUCTS (2019)
Lignin as a functional additive in a biocomposite: Influence on mechanical properties of polylactic acid composites
Ikenna Anugwom et al.
INDUSTRIAL CROPS AND PRODUCTS (2019)
Cleaner production of thermal insulation boards utilizing buffing dust waste
Waseem Hittini et al.
JOURNAL OF CLEANER PRODUCTION (2019)
Evaluation of corrugated cardboard biochar as reinforcing fiber on properties, biodegradability and weatherability of wood-plastic composites
Xiaoqian Wang et al.
POLYMER DEGRADATION AND STABILITY (2019)
A circular economy use of recovered sludge cellulose in wood plastic composite production: Recycling and eco-efficiency assessment
Yonghui Zhou et al.
WASTE MANAGEMENT (2019)
Waste Utilization: Insulation Panel from Recycled Polyurethane Particles and Wheat Husks
Stepan Hysek et al.
MATERIALS (2019)
Evaluating the influence of coupling agents in the structural properties of polypropylene coconut fiber composites
Luciano Pisanu et al.
MATERIALS RESEARCH EXPRESS (2019)
The influence of partial replacement of natural sand aggregates by grits residues on the mechanical properties of an ecological mortar
Andre Luis de Oliveira Junior et al.
JOURNAL OF BUILDING ENGINEERING (2019)
Selective removal of lead ions through capacitive deionization: Role of ion-exchange membrane
Qianqian Dong et al.
CHEMICAL ENGINEERING JOURNAL (2019)
Mechanical, morphological, structural and dynamic mechanical properties of alkali treated Ensete stem fibers reinforced unsaturated polyester composites
Tolera A. Negawo et al.
COMPOSITE STRUCTURES (2019)
Unprecedented high percentage of food waste powder filler in poly lactic acid green composites: synthesis, characterization, and volatile profile
Teresa Cecchi et al.
ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2019)
Novel biomass fly ash-based geopolymeric mortars using lime slaker grits as aggregate for applications in construction: Influence of granulometry and binder/aggregate ratio
Manfredi Saeli et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Cascading use of textile waste for the advancement of fibre reinforced composites for building applications
Claudia A. Echeverria et al.
JOURNAL OF CLEANER PRODUCTION (2019)
Sugarcane bagasse fiber as semi-reinforcement filler in natural rubber composite sandals
Fabio Friol Guedes de Paiva et al.
JOURNAL OF MATERIAL CYCLES AND WASTE MANAGEMENT (2019)
Lignin-Reinforced Nitrile Rubber/Poly(vinyl chloride) Composites via Metal Coordination Interactions
Haixu Wang et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2019)
Removing Methylene Blue from Aqueous Solutions Using Rice Husk Silica Adsorbent
Khalilollah Moeinian et al.
POLISH JOURNAL OF ENVIRONMENTAL STUDIES (2019)
Humic acid coated cellulose derived from rice husk: A novel biosorbent for the removal of Ni and Cr
Hirakendu Basu et al.
JOURNAL OF WATER PROCESS ENGINEERING (2019)
Recycling of waste tires and its energy storage application of by-products -a review
C. Sathiskumar et al.
SUSTAINABLE MATERIALS AND TECHNOLOGIES (2019)
Waste brewed tea leaf derived cellulose nanofiber reinforced fully bio-based waterborne polyester nanocomposite as an environmentally benign material
Geeti Kaberi Dutta et al.
RSC ADVANCES (2019)
Characteristics of polymer concrete produced from wasted construction materials
Awham M. Hameed et al.
TECHNOLOGIES AND MATERIALS FOR RENEWABLE ENERGY, ENVIRONMENT AND SUSTAINABILITY (TMREES) (2019)
Future scenarios of global plastic waste generation and disposal
Laurent Lebreton et al.
PALGRAVE COMMUNICATIONS (2019)
Mechanical characterization of HDPE reinforced with cellulose from rice husk biomass
Mariane Weirich Bosenbecker et al.
POLIMEROS-CIENCIA E TECNOLOGIA (2019)
Thermal insulation properties of hybrid textile reinforced biocomposites from food packaging waste
Ahmed H. Hassanin et al.
JOURNAL OF INDUSTRIAL TEXTILES (2018)
Green Coupling Agent for Agro-Waste Based Thermoplastic Composites
Koay Seong Chun et al.
POLYMER COMPOSITES (2018)
Paper Waste Sludge Enhanced Eco-Efficient Polyurethane Foam Composites: Physical-Mechanical Properties and Microstructure
Agne Kairyte et al.
POLYMER COMPOSITES (2018)
Properties of Polymer Composites Based on Bisphenol A Epoxy Resins With Original/Modified Steel Slag
Gulcihan Guzel et al.
POLYMER COMPOSITES (2018)
Effect of gamma irradiation and fiber surface treatment on the properties of bagasse fiber-reinforced waste polypropylene composites
Heba A. Raslan et al.
INTERNATIONAL JOURNAL OF POLYMER ANALYSIS AND CHARACTERIZATION (2018)
Fiber from DDGS and Corn Grain as Alternative Fillers in Polymer Composites with High Density Polyethylene from Bio-based and Petroleum Sources
Pankaj Pandey et al.
JOURNAL OF POLYMERS AND THE ENVIRONMENT (2018)
Evaluation of highly filled epoxy composites modified with walnut shell waste filler
Kamila Salasinska et al.
POLYMER BULLETIN (2018)
Novel natural rubber composites with geopolymer filler
Hassarutai Yangthong et al.
ADVANCES IN POLYMER TECHNOLOGY (2018)
Development of polyvinyl alcohol/chitosan bio-nanocomposite films reinforced with cellulose nanocrystals isolated from rice straw
Anand Babu Perumal et al.
APPLIED SURFACE SCIENCE (2018)
Composting of food wastes: Status and challenges
Alejandra Cerda et al.
BIORESOURCE TECHNOLOGY (2018)
Polyurethane elastomer composites reinforced with waste natural cellulosic fibers from office paper in thermal properties
Wanqing Lei et al.
CARBOHYDRATE POLYMERS (2018)
Chitosan/waste coffee-grounds composite: An efficient and eco-friendly adsorbent for removal of pharmaceutical contaminants from water
Emanuele F. Lessa et al.
CARBOHYDRATE POLYMERS (2018)
Oils sorption on hydrophobic nanocellulose aerogel obtained from the wood furniture industry waste
Pablo Beluck de Oliveira et al.
CELLULOSE (2018)
Carbon from waste source: An eco-friendly way for strengthening polymer composites
Aamer Khan et al.
COMPOSITES PART B-ENGINEERING (2018)
Biocomposites of different lignocellulosic wastes for sustainable food packaging applications
Estefania Lidon Sanchez-Safont et al.
COMPOSITES PART B-ENGINEERING (2018)
Recovery potential of cellulose fiber from newspaper waste: An approach on magnetic cellulose aerogel for dye adsorption material
K. Srasri et al.
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2018)
Recent progress in biodegradable polymers and nanocomposite-based packaging materials for sustainable environment
Jolanta Wroblewska-Krepsztul et al.
INTERNATIONAL JOURNAL OF POLYMER ANALYSIS AND CHARACTERIZATION (2018)
Cellulose nanofibers produced from various agricultural residues and their reinforcement effects in polymer nanocomposites
Alexander Sinclair et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2018)
The use of waste materials in wood-plastic composites and their impact on the profitability of the product
Anna Keskisaari et al.
RESOURCES CONSERVATION AND RECYCLING (2018)
Crop residue harvest for bioenergy production and its implications on soil functioning and plant growth: A review
Mauricio Roberto Cherubin et al.
SCIENTIA AGRICOLA (2018)
Gravimetric composition of the rejects coming from the segregation process of the municipal recyclable wastes
J. M. B. M. Moura et al.
WASTE MANAGEMENT (2018)
Study on the effects of catalysts on the immobilization efficiency and mechanism of heavy metals during the microwave pyrolysis of sludge
Shichang Sun et al.
WASTE MANAGEMENT (2018)
Production of Value-Added Composites from Aluminum-Plastic Package Waste via Solid-State Shear Milling Process
Shuangqiao Yang et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2018)
Real-time and selective detection of nitrates in water using graphene-based field-effect transistor sensors
Xiaoyan Chen et al.
ENVIRONMENTAL SCIENCE-NANO (2018)
Effect of Fiber Loadings and Treatment on Dynamic Mechanical, Thermal and Flammability Properties of Pineapple Leaf Fiber and Kenaf Phenolic Composites
M. Asim et al.
JOURNAL OF RENEWABLE MATERIALS (2018)
Changing Tetra Pak: from waste to resource
Yuhui Ma
SCIENCE PROGRESS (2018)
Green geopolymeric concrete using grits for applications in construction
M. Saeli et al.
MATERIALS LETTERS (2018)
Recent developments in nanocellulose-based biodegradable polymers, thermoplastic polymers, and porous nanocomposites
H. Kargarzadeh et al.
PROGRESS IN POLYMER SCIENCE (2018)
Formulation and durability of a geopolymer based on metakaolin/tannery sludge
Mantong Jin et al.
WASTE MANAGEMENT (2018)
Cellulose defibrillation and functionalization by plasma in liquid treatment
Sorin Vizireanu et al.
SCIENTIFIC REPORTS (2018)
High-performance thermal and electrical conductive composites from multilayer plastic packaging waste and expanded graphite
Shuangqiao Yang et al.
JOURNAL OF MATERIALS CHEMISTRY C (2018)
Composites from renewable and sustainable resources: Challenges and innovations
Amar K. Mohanty et al.
SCIENCE (2018)
Thermoplastic Processing of PLA/Cellulose Nanomaterials Composites
T. C. Mokhena et al.
POLYMERS (2018)
Second Generation Bioethanol Production: On the Use of Pulp and Paper Industry Wastes as Feedstock
Rita H. R. Branco et al.
FERMENTATION-BASEL (2018)
Dry Sliding Wear Characteristics Of Epoxy Composites Filled With Steel Industry Slag And Sludge Particles: A Comparative Study
Abhilash Purohit et al.
MATERIALS TODAY-PROCEEDINGS (2018)
Durability of wood plastic composites manufactured from recycled plastic
Irina Turku et al.
HELIYON (2018)
Effect of fiber loading on Thermal properties of Banana and Pineapple leaf fiber Reinforced Polyester Composites
P. V. Ch. R. K. Santosha et al.
MATERIALS TODAY-PROCEEDINGS (2018)
Green Composites: A Review
Sharath H. S. Shekar et al.
MATERIALS TODAY-PROCEEDINGS (2018)
Polyethylene green composites modified with post agricultural waste filler: thermo-mechanical and damping properties
Mateusz Barczewski et al.
COMPOSITE INTERFACES (2018)
Factors influencing source separation intention and willingness to pay for improving waste management in Bangkok, Thailand
Sujitra Vassanadumrongdee et al.
SUSTAINABLE ENVIRONMENT RESEARCH (2018)
Wastes as aggregate substitution in polymer concrete
Gavril Sosoi et al.
11TH INTERNATIONAL CONFERENCE INTERDISCIPLINARITY IN ENGINEERING, INTER-ENG 2017 (2018)
Application of different magnetic intensities for the treatment of landfill leachate in Egypt
Raed S. Al-Wasify et al.
COGENT ENGINEERING (2018)
Development of a cellulose-based insulating composite material for green buildings: Case of treated organic waste (paper, cardboard, hash)
Ahmed Ouargui et al.
SUSTAINABLE BUILDINGS AND CITIES, 2017 (2018)
Investigating the mechanical behavior of composites made from textile industry waste
Muhammad Umar et al.
JOURNAL OF THE TEXTILE INSTITUTE (2017)
Enhancing anti-microbial properties of wood-plastic composites produced from timber and plastic wastes
Lei Wang et al.
ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2017)
Processing and properties of sorghum stem fragment-polyethylene composites
Loan T. T. Vo et al.
INDUSTRIAL CROPS AND PRODUCTS (2017)
Polypropylene-based composites reinforced with textile wastes
Rafael S. Araujo et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2017)
Reinforcement of waste hemp fibres in aromatic diamine-based benzoxazine thermosets for the enhancement of mechanical and thermomechanical properties
Abdul Qadeer Dayo et al.
PLASTICS RUBBER AND COMPOSITES (2017)
Recent developments on nanocellulose reinforced polymer nanocomposites: A review
Hanieh Kargarzadeh et al.
POLYMER (2017)
Exploring two innovative recycling ways for poly-(propylene)-flax non wovens wastes
Nicolas Renouard et al.
POLYMER DEGRADATION AND STABILITY (2017)
Improving the Properties of Banana Fiber Reinforced Polymeric Composites by Treating the Fibers
William Jordan et al.
3RD INTERNATIONAL CONFERENCE ON NATURAL FIBERS: ADVANCED MATERIALS FOR A GREENER WORLD, ICNF 2017 (2017)
The effects of by-products incorporated in low-strength concrete for concrete masonry units
Maggi Madrid et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Fabrication and properties of poly(butylene succinate) biocomposites reinforced by waste silkworm silk fabric
Shaoyong Chen et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2017)
Purification and Characterization of Silica from Sugarcane Bagasse Ash as a Reinforcing Filler in Natural Rubber Composites
Potchanaporn Huabcharoen et al.
BIORESOURCES (2017)
Characterization of wood plastic composites manufactured from recycled plastic blends
Irina Turku et al.
COMPOSITE STRUCTURES (2017)
Preparation of clinker from paper pulp industry wastes
Leire H. Buruberri et al.
JOURNAL OF HAZARDOUS MATERIALS (2015)
Compost of residues of pulp and paper in the production of eucalyptus seedlings
Fabio H. S. F. de Toledo et al.
REVISTA BRASILEIRA DE ENGENHARIA AGRICOLA E AMBIENTAL (2015)
Degradation and stability of green composites fabricated from oil palm empty fruit bunch fiber and polylactic acid: Effect of fiber length
A. K. M. Moshiul Alam et al.
JOURNAL OF COMPOSITE MATERIALS (2015)
A review on management of chrome-tanned leather shavings: a holistic paradigm to combat the environmental issues
Anupama Pati et al.
ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2014)
Reusing Textile Waste as Reinforcements in Composites
Sunil Kumar Ramamoorthy et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2014)
Potentiality of utilising natural textile materials for engineering composites applications
Mohd Iqbal Misnon et al.
MATERIALS & DESIGN (2014)
Recycling of Textile Waste Into Green Composites: Performance Characterization
Rajesh Mishra et al.
POLYMER COMPOSITES (2014)
Use of pulp mill inorganic wastes as alternative liming materials
F. Cabral et al.
BIORESOURCE TECHNOLOGY (2008)
Properties of Recycled Polycarbonate/Waste Silk and Cotton Fiber Polymer Composites
Muenir Tasdemir et al.
INTERNATIONAL JOURNAL OF POLYMERIC MATERIALS (2008)
Solid waste management in Abuja, Nigeria
A. Imam et al.
WASTE MANAGEMENT (2008)
Dynamic mechanical analysis of randomly oriented intimately mixed short banana/sisal hybrid fibre reinforced polyester composites
M Idicula et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2005)
Recycling polyester and polypropylene nonwoven selvages to produce functional sound absorption composites
CW Lou et al.
TEXTILE RESEARCH JOURNAL (2005)