相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Factors influencing the antimicrobial efficacy of Dielectric Barrier Discharge (DBD) Atmospheric Cold Plasma (ACP) in food processing applications
Ehsan Feizollahi et al.
CRITICAL REVIEWS IN FOOD SCIENCE AND NUTRITION (2021)
Actively controlled local drug delivery using conductive polymer-based devices
Christopher A. R. Chapman et al.
APPLIED PHYSICS LETTERS (2020)
An atmospheric pressure plasma jet to tune the bioactive peptide coupling to polycaprolactone electrospun layers
Alessandro Maffei et al.
APPLIED SURFACE SCIENCE (2020)
A comparative assessment of poly(vinylidene fluoride)/conducting polymer electrospun nanofiber membranes for biomedical applications
Pavel Sengupta et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2020)
Biodegradable polymer nanocomposites for ligament/tendon tissue engineering
Magda Silva et al.
JOURNAL OF NANOBIOTECHNOLOGY (2020)
Polymer scaffolds as drug delivery systems
Italo Rodrigo Calori et al.
EUROPEAN POLYMER JOURNAL (2020)
Design and Experimental Evaluation of Innovative Wire-to-Plane Fins' Configuration for Atmosphere Corona-Discharge Cooling Devices
Mar Cogollo et al.
APPLIED SCIENCES-BASEL (2020)
Special Issue Plasma Technology for Biomedical Applications
Emilio Martines
APPLIED SCIENCES-BASEL (2020)
Natural and Synthetic Polymers for Bone Scaffolds Optimization
Francesca Donnaloja et al.
POLYMERS (2020)
Plasma treatment in air at atmospheric pressure that enables reagent-free covalent immobilization of biomolecules on polytetrafluoroethylene (PTFE)
Marcela M. M. Bilek et al.
APPLIED SURFACE SCIENCE (2020)
Cold atmospheric pressure plasma: simple and efficient strategy for preparation of poly(2-oxazoline)-based coatings designed for biomedical applications
Petra Sramkova et al.
SCIENTIFIC REPORTS (2020)
Recent Advances in Surface Activation of Polytetrafluoroethylene (PTFE) by Gaseous Plasma Treatments
Gregor Primc
POLYMERS (2020)
Activation of ferroelectric implant ceramics by corona discharge poling
Magnus Rotan et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2020)
Plasma Technology and Its Relevance in Waste Air and Waste Gas Treatment
Christine Dobslaw et al.
SUSTAINABILITY (2020)
Hydrogel scaffolds for tissue engineering: the importance of polymer choice
Christopher D. Spicer
POLYMER CHEMISTRY (2020)
Synergistic effect of pressure cold atmospheric plasma and carboxymethyl chitosan to mesenchymal stem cell differentiation on PCL/CMC nanofibers for cartilage tissue engineering
Parinaz Sadat Alemi et al.
POLYMERS FOR ADVANCED TECHNOLOGIES (2019)
A review on electrically conducting polymer bionanocomposites for biomedical and other applications
Neelima Dubey et al.
INTERNATIONAL JOURNAL OF POLYMERIC MATERIALS AND POLYMERIC BIOMATERIALS (2019)
Tuning the biomimetic behavior of scaffolds for regenerative medicine through surface modifications
Nathan R. Richbourg et al.
JOURNAL OF TISSUE ENGINEERING AND REGENERATIVE MEDICINE (2019)
Dual RGD-immobilized poly(L-lactic acid) by atmospheric pressure plasma jet for bone tissue engineering
Fu-Chen Kung et al.
COLLOIDS AND SURFACES B-BIOINTERFACES (2019)
Controlling Cell Behavior through the Design of Biomaterial Surfaces: A Focus on Surface Modification Techniques
Hamed Amani et al.
ADVANCED MATERIALS INTERFACES (2019)
Challenges With the Development of Biomaterials for Sustainable Tissue Engineering
David F. Williams
FRONTIERS IN BIOENGINEERING AND BIOTECHNOLOGY (2019)
Plasma Medicine: Applications of Cold Atmospheric Pressure Plasma in Dermatology
Thoralf Bernhardt et al.
OXIDATIVE MEDICINE AND CELLULAR LONGEVITY (2019)
Preparation of electrospun PCL-based scaffolds by mono/multi-functionalized GO
Ahmet Ozan Basar et al.
BIOMEDICAL MATERIALS (2019)
Understanding interactions between biomaterials and biological systems using proteomics
Ziryan Othman et al.
BIOMATERIALS (2018)
Vascular Tissue Engineering: Progress, Challenges, and Clinical Promise
H. -H. Greco Song et al.
CELL STEM CELL (2018)
Dielectric barrier discharge and jet type plasma surface modifications of hybrid polymeric poly (ε-caprolactone)/chitosan scaffolds
Ozan Ozkan et al.
JOURNAL OF BIOMATERIALS APPLICATIONS (2018)
Development of Antibacterial Composite Electrospun Chitosan-Coated Polypropylene Materials
Melike Gozutok et al.
JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY (2018)
Antibacterial Performance of PCL-Chitosan Core-Shell Scaffolds
Ozan Ozkan et al.
JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY (2018)
Surface modification of polyethylene/graphene composite using corona discharge
Anton Popelka et al.
JOURNAL OF PHYSICS D-APPLIED PHYSICS (2018)
Atmospheric plasma etching of polymers: A palette of applications in cleaning/ashing, pattern formation, nanotexturing and superhydrophobic surface fabrication
P. Dimitrakellis et al.
MICROELECTRONIC ENGINEERING (2018)
Current development of biodegradable polymeric materials for biomedical applications
Richard Song et al.
DRUG DESIGN DEVELOPMENT AND THERAPY (2018)
Comparative Study of AC and Positive and Negative DC Visual Corona for Sphere-Plane Gaps in Atmospheric Air
Jordi-Roger Riba et al.
ENERGIES (2018)
Effect of recycling overhead gases on pollutants degradation efficiency in gas-phase pulsed corona discharge treatment
Vineeth Pothanamkandathil et al.
JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2018)
An overview on biodegradation of polystyrene and modified polystyrene: the microbial approach
Ba Thanh Ho et al.
CRITICAL REVIEWS IN BIOTECHNOLOGY (2018)
Atmospheric pressure non-equilibrium plasma jet technology: general features, specificities and applications in surface processing of materials
Fiorenza Fanelli et al.
SURFACE & COATINGS TECHNOLOGY (2017)
Vascular Tissue Engineering: Effects of Integrating Collagen into a PCL Based Nanofiber Material
Ulf Bertram et al.
BIOMED RESEARCH INTERNATIONAL (2017)
Bone biomaterials and interactions with stem cells
Chengde Gao et al.
BONE RESEARCH (2017)
Atmospheric pressure plasma assisted immobilization of hyaluronic acid on tissue engineering PLA-based scaffolds and its effect on primary human macrophages
Valeriya Kudryavtseva et al.
MATERIALS & DESIGN (2017)
Surface Modification of Polymer Substrates for Biomedical Applications
Oldrich Nedela et al.
MATERIALS (2017)
Biomaterials that promote cell-cell interactions enhance the paracrine function of MSCs
Taimoor H. Qazi et al.
BIOMATERIALS (2017)
Dielectric barrier discharges: progress on plasma sources and on the understanding of regimes and single filaments
Ronny Brandenburg
PLASMA SOURCES SCIENCE & TECHNOLOGY (2017)
Fundamentals of protein and cell interactions in biomaterials
Hammed Tanimowo Aiyelabegan et al.
BIOMEDICINE & PHARMACOTHERAPY (2017)
A short discourse on vascular tissue engineering
William G. Chang et al.
NPJ REGENERATIVE MEDICINE (2017)
Enhancement of cell growth on honeycomb-structured polylactide surface using atmospheric-pressure plasma jet modification
Kuang-Yao Cheng et al.
APPLIED SURFACE SCIENCE (2017)
Human Fetal Osteoblast Response on Poly(Methyl Methacrylate)/Polystyrene Demixed Thin Film Blends: Surface Chemistry Vs Topography Effects
Raechelle A. D'Sa et al.
ACS APPLIED MATERIALS & INTERFACES (2016)
DBD atmospheric plasma-modified, electrospun, layer-by-layer polymeric scaffolds for L929 fibroblast cell cultivation
Seda Surucu et al.
JOURNAL OF BIOMATERIALS SCIENCE-POLYMER EDITION (2016)
Development of a radio frequency atmospheric pressure plasma jet for diamond-like carbon coatings on stainless steel substrates
F. Sohbatzadeh et al.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2016)
Superhydrophobic materials for biomedical applications
Eric J. Falde et al.
BIOMATERIALS (2016)
Free-Radical-Induced Grafting from Plasma Polymer Surfaces
Farid Khelifa et al.
CHEMICAL REVIEWS (2016)
Effect of cold atmospheric pressure plasma gas composition on the surface and cyto-compatible properties of low density polyethylene (LDPE) films
K. Navaneetha Pandiyaraj et al.
CURRENT APPLIED PHYSICS (2016)
Development of core-shell coaxially electrospun composite PCL/chitosan scaffolds
Seda Surucu et al.
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2016)
Novel thin films deposited on electrospun PCL scaffolds by atmospheric pressure plasma jet for L929 fibroblast cell cultivation
M. Gozutok et al.
JOURNAL OF PHYSICS D-APPLIED PHYSICS (2016)
Selective Plasma Etching of Polymeric Substrates for Advanced Applications
Harinarayanan Puliyalil et al.
NANOMATERIALS (2016)
Treatment of poly(ethylene terephthalate) foils by atmospheric pressure air dielectric barrier discharge and its influence on cell growth
Anna Kuzminova et al.
APPLIED SURFACE SCIENCE (2015)
Pulsed Corona Discharge in Water Treatment: The Effect of Hydrodynamic Conditions on Oxidation Energy Efficiency
Petri Ajo et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2015)
Improving polymeric surfaces for biomedical applications: a review
P. Ferreira et al.
JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH (2015)
A review of recent applications of atmospheric pressure plasma jets for materials processing
Oleksiy V. Penkov et al.
JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH (2015)
Enhanced adherence of mouse fibroblast and vascular cells to plasma modified polyethylene
Alena Reznickova et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2015)
He/O2 Atmospheric Pressure Plasma Jet Treatments of PCL Scaffolds for Tissue Engineering and Regenerative Medicine
Ilaria Trizio et al.
PLASMA PROCESSES AND POLYMERS (2015)
Atmospheric pressure plasma jets: an overview of devices and new directions
J. Winter et al.
PLASMA SOURCES SCIENCE & TECHNOLOGY (2015)
The effect of plasma surface modification on the biodegradation rate and biocompatibility of a poly(butylene succinate)-based copolymer
Martina Fabbri et al.
POLYMER DEGRADATION AND STABILITY (2015)
In situ QCM-D study of nano-bio interfaces with enhanced biocompatibility
Motohiro Tagaya
POLYMER JOURNAL (2015)
Review: Radiation-induced surface modification of polymers for biomaterial application
Saravana Kumar Jaganathan et al.
JOURNAL OF MATERIALS SCIENCE (2015)
Biomaterials for Tissue Engineering
Esther J. Lee et al.
ANNALS OF BIOMEDICAL ENGINEERING (2014)
Cytocompatibility of polymers grafted by activated carbon nano-particles
V. Svorcik et al.
CARBON (2014)
Cell immobilization on polymer by air atmospheric pressure plasma jet treatment
Jung-Hwan Lee et al.
JAPANESE JOURNAL OF APPLIED PHYSICS (2014)
Atmospheric Pressure Plasma Processing for Polymer Adhesion: A Review
Yukihiro Kusano
JOURNAL OF ADHESION (2014)
Improving cell adhesion: development of a biosensor for cell behaviour monitoring by surface grafting of sulfonic groups onto a thermoplastic polyurethane
P. Alves et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2014)
Carboxyl Surface Functionalization of Poly( L-lactic acid) Electrospun Nanofibers through Atmospheric Non-Thermal Plasma Affects Fibroblast Morphology
Luisa Stella Dolci et al.
PLASMA PROCESSES AND POLYMERS (2014)
A Surface-Modified Poly(e-caprolactone) Scaffold Comprising Variable Nanosized Surface-Roughness Using a Plasma Treatment
HoJun Jeon et al.
TISSUE ENGINEERING PART C-METHODS (2014)
Cyclodextrin functionalization of several cellulosic substrates for prolonged release of antibacterial agents
Oriol Cusola et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2013)
Novel atmospheric plasma enhanced chitosan nanofiber/gauze composite wound dressings
Rupesh Nawalakhe et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2013)
Stability of the hydrophilic and superhydrophobic properties of oxygen plasma-treated poly(tetrafluoroethylene) surfaces
Hernando S. Salapare et al.
JOURNAL OF COLLOID AND INTERFACE SCIENCE (2013)
Surface modification of polymers by plasma treatments for the enhancement of biocompatibility and controlled drug release
S. Yoshida et al.
SURFACE & COATINGS TECHNOLOGY (2013)
Cold atmospheric pressure gas plasma enhances the wear performance of ultra-high molecular weight polyethylene
Stefano Perni et al.
ACTA BIOMATERIALIA (2012)
Atmospheric Pressure Plasma: A High-Performance Tool for the Efficient Removal of Biofilms
Katja Fricke et al.
PLOS ONE (2012)
Development of a cold atmospheric pressure microplasma jet for freeform cell printing
Halim Ayan et al.
APPLIED PHYSICS LETTERS (2011)
Investigation on a DBD Plasma Reactor
Hamid Ghomi et al.
IEEE TRANSACTIONS ON PLASMA SCIENCE (2011)
Effect of Surface Wettability and Topography on the Adhesion of Osteosarcoma Cells on Plasma-modified Polystyrene
Denis P. Dowling et al.
JOURNAL OF BIOMATERIALS APPLICATIONS (2011)
Low temperature atmospheric pressure plasma sources for microbial decontamination
J. Ehlbeck et al.
JOURNAL OF PHYSICS D-APPLIED PHYSICS (2011)
Nitrogen grafting onto polycarprolactone by a simple surface modification with atmospheric pressure glow discharge (Ar-APGD) and promoted neonatal human fibroblast growth
Inho Han et al.
MACROMOLECULAR RESEARCH (2011)
High Rate Etching of Polymers by Means of an Atmospheric Pressure Plasma Jet
Katja Fricke et al.
PLASMA PROCESSES AND POLYMERS (2011)
Plasma Surface Modification of Biodegradable Polymers: A Review
Rino Morent et al.
PLASMA PROCESSES AND POLYMERS (2011)
Influence of water/O2 plasma treatment on cellular responses of PCL and PET surfaces (vol 21, pg 123, 2011)
Hilal Turkoglu Sasmazel et al.
BIO-MEDICAL MATERIALS AND ENGINEERING (2011)
The hairline plasma: An intermittent negative dc-corona discharge at atmospheric pressure for plasma medical applications
R. Bussiahn et al.
APPLIED PHYSICS LETTERS (2010)
The biocompatibility of sulfobetaine engineered polymethylmethacrylate by surface entrapment technique
Anand P. Khandwekar et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2010)
Plasma-chemical reactions: low pressure acetylene plasmas
J. Benedikt
JOURNAL OF PHYSICS D-APPLIED PHYSICS (2010)
Three distinct modes in a cold atmospheric pressure plasma jet
J. L. Walsh et al.
JOURNAL OF PHYSICS D-APPLIED PHYSICS (2010)
Biomaterials for vascular tissue engineering
Swathi Ravi et al.
REGENERATIVE MEDICINE (2010)
Cellular responses of vascular endothelial cells on surface modified polyurethane films grafted electrospun PLGA fiber with microwave-induced plasma at atmospheric pressure
Bong Joo Park et al.
SURFACE & COATINGS TECHNOLOGY (2010)
Recent advances in the understanding of homogeneous dielectric barrier discharges
F. Massines et al.
EUROPEAN PHYSICAL JOURNAL-APPLIED PHYSICS (2009)
Evaluation of Biocompatibility and Cytotoxicity Using Keratinocyte and Fibroblast Cultures
C. Wiegand et al.
SKIN PHARMACOLOGY AND PHYSIOLOGY (2009)
Role of reactive gas in atmospheric plasma for cell attachment and proliferation on biocompatible poly ε-caprolactone film
Hyun-Uk Lee et al.
APPLIED SURFACE SCIENCE (2008)
Tissue engineering: strategies, stem cells and scaffolds
Daniel Howard et al.
JOURNAL OF ANATOMY (2008)
Plasma surface modification of poly(D,L-lactic acid) as a tool to enhance protein adsorption and the attachment of different cell types
C. M. Alves et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2008)
Effect of dielectric barrier discharge plasma on the attachment and proliferation of osteoblasts cultured over poly(ε-caprolactone) scaffolds
Eda D. Yildirim et al.
PLASMA PROCESSES AND POLYMERS (2008)
Ablation and water etching of plasma-treated polymers
J. Siegel et al.
RADIATION EFFECTS AND DEFECTS IN SOLIDS (2008)
Organic contaminants removal by oxygen ECR plasma
Chongmu Lee et al.
APPLIED SURFACE SCIENCE (2007)
UV surface modification of a new nanocomposite polymer to improve cytocompatibility
Michael Olbrich et al.
JOURNAL OF BIOMATERIALS SCIENCE-POLYMER EDITION (2007)
Surface modification of poly(L-lactide) by atmospheric pressure plasma treatment and cell response
Fumio Teraoka et al.
DENTAL MATERIALS JOURNAL (2006)
Improvement of cell adhesion on poly(L-lactide) by atmospheric plasma treatment
M Nakagawa et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2006)
Poly-epsilon-caprolactone/hydroxyapatite composites for bone regeneration: in vitro characterization and human osteoblast response
F Causa et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2006)
Atmospheric pressure plasmas: A review
C Tendero et al.
SPECTROCHIMICA ACTA PART B-ATOMIC SPECTROSCOPY (2006)
Hazardous gas treatment using atmospheric pressure microwave discharges
J Mizeraczyk et al.
PLASMA PHYSICS AND CONTROLLED FUSION (2005)
Get a grip:: integrins in cell-biomaterial interactions
AJ García
BIOMATERIALS (2005)
Grafting of gelatin on electrospun poly(caprolactone) nanofibers to improve endothelial cell spreading and proliferation and to control cell orientation
ZW Ma et al.
TISSUE ENGINEERING (2005)
Laser surface modification of poly(ε-caprolactone) (PCL) membrane for tissue engineering applications
KS Tiaw et al.
BIOMATERIALS (2005)
The transition from a filamentary dielectric barrier discharge to a diffuse barrier discharge in air at atmospheric pressure
J Ráhel et al.
JOURNAL OF PHYSICS D-APPLIED PHYSICS (2005)
Plasma treatment of polyurethane coating for improving endothelial cell growth and adhesion
S De et al.
JOURNAL OF BIOMATERIALS SCIENCE-POLYMER EDITION (2005)
Effects of DBD plasma operating parameters on the polymer surface modification
HZ Liu et al.
SURFACE & COATINGS TECHNOLOGY (2004)
Effects of radio-frequency driving power, gas pressure, and nitrogen seeding on the transition dynamics in argon inductively coupled plasmas
MA Razzak et al.
JOURNAL OF APPLIED PHYSICS (2004)
Dielectric-barrier discharges: Their history, discharge physics, and industrial applications
U Kogelschatz
PLASMA CHEMISTRY AND PLASMA PROCESSING (2003)
Surface modification of polyester fabric by corona discharge irradiation
WL Xu et al.
EUROPEAN POLYMER JOURNAL (2003)
Dielectric barrier discharge - properties and applications
XJ Xu
THIN SOLID FILMS (2001)