相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Strain-Rate-Dependent Deformation Behavior and Mechanical Properties of a Multi-Phase Medium-Manganese Steel
Simon Sevsek et al.
METALS (2019)
Experimental and numerical study of mechanical properties of multi-phase medium-Mn TWIP-TRIP steel: Influences of strain rate and phase constituents
J. T. Benzing et al.
ACTA MATERIALIA (2019)
The influence of microstructural characteristics on yield point elongation phenomenon in Fe-0.2C-11Mn-2Al steel
Z. H. Cai et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
On the dynamic behavior and relationship to mechanical properties of cold-rolled Fe-0.2C-15Mn-3Al steel at intermediate strain rate
Z. Y. Tang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Effect of Deformation Temperature on the Portevin-Le Chatelier Effect in Medium-Mn Steel
Barbara Grzegorczyk et al.
METALS (2019)
Deformation mechanism transition in Fe-17Mn-0.4C-0.06V TWIP steel with different strain rates
Mei Xu et al.
MATERIALS SCIENCE AND TECHNOLOGY (2018)
Novel medium-Mn (austenite plus martensite) duplex hot-rolled steel achieving 1.6 GPa strength with 20 % ductility by Mn-segregation-induced TRIP mechanism
Hyungsoo Lee et al.
ACTA MATERIALIA (2018)
Interrelation between the Portevin Le-Chatelier effect and necking in AlMg alloys
D. Zhemchuzhnikova et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2018)
On the Importance of Adiabatic Heating on Deformation Behavior of Medium-Manganese Sheet Steels
Radhakanta Rana et al.
JOM (2018)
Strain Rate Effect on Tensile Flow Behavior and Anisotropy of a Medium-Manganese TRIP Steel
Rakan Alturk et al.
JOM (2018)
Effects of strain rate on mechanical properties and deformation behavior of an austenitic Fe-25Mn-3Al-3Si TWIP-TRIP steel
J. T. Benzing et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Quasi-static and dynamic deformation mechanisms interpreted by microstructural evolution in TWinning Induced Plasticity (TWIP) steel
Jaeyeong Park et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Interpretation of quasi-static and dynamic tensile behavior by digital image correlation technique in TWinning Induced Plasticity (TWIP) and low-carbon steel sheets
Minju Kang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Discontinuous strain-induced martensite transformation related to the Portevin-Le Chatelier effect in a medium manganese steel
Binhan Sun et al.
SCRIPTA MATERIALIA (2017)
Kinematic and thermal characteristics of Luders and Portevin-Le Chatelier bands in a medium Mn transformation-induced plasticity steel
X. G. Wang et al.
ACTA MATERIALIA (2017)
The mechanism of hydrogen embrittlement in intercritically annealed medium Mn TRIP steel
Jeongho Han et al.
ACTA MATERIALIA (2016)
Microstructure and deformation behavior of the hot-rolled medium manganese steels with varying aluminum-content
Z. H. Cai et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Characterization of the deformation behaviors associated with the serrated flow of a 5456 Al-based alloy using two orthogonal digital image correlation systems
Y. L. Cai et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Mechanistic contribution of the interplay between microstructure and plastic deformation in hot-rolled Fe-11Mn-2/4Al-0.2C steel
Z. H. Cai et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Plastic instability at elevated temperatures in a TRIP-assisted steel
Junying Min et al.
MATERIALS & DESIGN (2016)
Austenite stability and deformation behavior in a cold-rolled transformation-induced plasticity steel with medium manganese content
Z. H. Cai et al.
ACTA MATERIALIA (2015)
Mechanical properties and austenite stability in hot-rolled 0.2C-1.6/3.2Al-6Mn-Fe TRIP steel
Z. C. Li et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Microstructural Evolution and Deformation Behavior of a Hot-Rolled and Heat Treated Fe-8Mn-4Al-0.2C Steel
Zhihui Cai et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2014)
Deformation mechanisms in austenitic TRIP/TWIP steels at room and elevated temperature investigated by acoustic emission and scanning electron microscopy
M. Linderov et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Effect of the Strain Rate on the TRIP-TWIP Transition in Austenitic Fe-12 pct Mn-0.6 pct C TWIP Steel
Sangwon Lee et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2014)
Unique serrated flow dependence of critical stress in a hot-rolled Fe-Mn-Al-C steel
Z. H. Cai et al.
SCRIPTA MATERIALIA (2014)
EFFECT OF STRAIN RATE ON DYNAMIC DEFORMATION BEHAVIOR OF DP780 STEEL
Dong Danyang et al.
ACTA METALLURGICA SINICA (2013)
Microstructural evolution and mechanical properties of hot-rolled 11% manganese TRIP steel
Z. H. Cai et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Temperature dependence of plastic deformation mechanisms in a modified transformation-twinning induced plasticity steel
A. Asghari et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Abnormal room temperature serrated flow and strain rate dependence of critical strain of a Fe-Mn-C twin-induced plasticity steel
Lihe Qian et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
EFFECT OF STRAIN RATE ON MICROSTRUCTURE EVOLUTION AND MECHANICAL BEHAVIOR OF A LOW C HIGH Mn TRIP/TWIP STEELS
Wu Zhiqiang et al.
ACTA METALLURGICA SINICA (2012)
High-Strain-Rate Deformation: Mechanical Behavior and Deformation Substructures Induced
George T. (Rusty) Gray
ANNUAL REVIEW OF MATERIALS RESEARCH, VOL 42 (2012)
Effect of strain rate on deformation behavior of TRIP steels
Zhongping He et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2012)
Evolution of microstructure and mechanical properties of medium Mn steels during double annealing
A. Arlazarov et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
On the origin of dynamic strain aging in twinning-induced plasticity steels
Seok-Jae Lee et al.
ACTA MATERIALIA (2011)
Experimental and numerical analysis on formation of stable austenite during the intercritical annealing of 5Mn steel
Haiwen Luo et al.
ACTA MATERIALIA (2011)
Effects of Al addition on high strain rate deformation of fully austenitic high Mn steels
Si Woo Hwang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Work hardening associated with ε-martensitic transformation, deformation twinning and dynamic strain aging in Fe-17Mn-0.6C and Fe-17Mn-0.8C TWIP steels
Motomichi Koyama et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Austenite stability of ultrafine-grained transformation-induced plasticity steel with Mn partitioning
Seawoong Lee et al.
SCRIPTA MATERIALIA (2011)
Dependence of tensile deformation behavior of TWIP steels on stacking fault energy, temperature and strain rate
S. Curtze et al.
ACTA MATERIALIA (2010)
Enhanced work-hardening behavior and mechanical properties in ultrafine-grained steels with large-fractioned metastable austenite
Jie Shi et al.
SCRIPTA MATERIALIA (2010)
Derivation and Variation in Composition-Dependent Stacking Fault Energy Maps Based on Subregular Solution Model in High-Manganese Steels
A. Saeed-Akbari et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2009)
Influence of addition elements on the stacking-fault energy and mechanical properties of an austenitic Fe-Mn-C steel
A. Dumay et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Microstructural and mechanical characterization of C-Mn-Al-Si cold-rolled TRIP-aided steel
Ashok Kumar Srivastava et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2007)
On dislocation accumulation and work hardening in Hadfield steel
Bevis Hutchinson et al.
SCRIPTA MATERIALIA (2006)
Thermal stability of retained austenite in TRIP steels studied by synchrotron X-ray diffraction during cooling
NH van Dijk et al.
ACTA MATERIALIA (2005)
Correlations between the calculated stacking fault energy and the plasticity mechanisms in Fe-Mn-C alloys
S Allain et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)
Supra-ductile and high-strength manganese-TRIP/TWIP steels for high energy absorption purposes
G Frommeyer et al.
ISIJ INTERNATIONAL (2003)
High strength Fe-Mn-(Al, Si) TRIP/TWIP steels development - properties - application
O Grassel et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2000)