4.4 Article

Detection of Top-Bar Effect in Reinforced Concrete Using Guided Ultrasonic Waves

期刊

JOURNAL OF STRUCTURAL ENGINEERING
卷 147, 期 4, 页码 -

出版社

ASCE-AMER SOC CIVIL ENGINEERS
DOI: 10.1061/(ASCE)ST.1943-541X.0002950

关键词

Ultrasonic; Shear waves; Steel-concrete interface; Debonding; Top-bar effect

资金

  1. Australian Research Council [DP160104731]

向作者/读者索取更多资源

This study proposed a nondestructive method using ultrasonic shear waves to detect steel-concrete interface debonding caused by the top-bar effect. Experiments were conducted by casting horizontal reinforcements at different heights in a concrete wall to create interfacial defects underneath the top bars, and the results showed that the signal amplitude increased with the height of the bars. Utilizing the increasing difference between the high-frequency component and the excitation frequency of the signal could be a way to monitor the top-bar effect nondestructively.
An ultrasonic shear wave-based nondestructive method is proposed in this paper to detect steel-concrete interface debonding owing to the top-bar effect. A concrete wall was cast with horizontal reinforcements at different heights in order to create interfacial defects underneath the top bars. Lead zirconate titanate (PZT) patches were surface mounted at the ends of the bars to excite and record shear waves. The ultrasonic results showed that the amplitude of the signals increased with the height of the bars. The specimens were cut open after the experiments and the top-bar effect was clearly discerned. Its increase with the height of the bar was clearly observed. An increasing difference between the high-frequency component (HFC) and the excitation frequency of the signal was observed between the bottom bar with a good bond and the top bars. This feature can be utilized for nondestructively monitoring the top-bar effect. (C) 2021 American Society of Civil Engineers.

作者

我是这篇论文的作者
点击您的名字以认领此论文并将其添加到您的个人资料中。

评论

主要评分

4.4
评分不足

次要评分

新颖性
-
重要性
-
科学严谨性
-
评价这篇论文

推荐

暂无数据
暂无数据