相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Material behavior of rubber sealing for proton exchange membrane fuel cells
Diankai Qiu et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)
Local impact of load cycling on degradation in polymer electrolyte fuel cells
D. Garcia-Sanchez et al.
APPLIED ENERGY (2020)
In-situ diagnostic tools for hydrogen transfer leak characterization in PEM fuel cell stacks part III: Manufacturing applications
Amir M. Niroumand et al.
JOURNAL OF POWER SOURCES (2020)
The Effect of Membrane Casting Irregularities on Initial Fuel Cell Performance
A. Phillips et al.
FUEL CELLS (2020)
Effects of Fuel Cell Operating Conditions on Proton Exchange Membrane Durability at Open-Circuit Voltage
N. Zhao et al.
FUEL CELLS (2020)
Impact of electrode thick spot irregularities on polymer electrolyte membrane fuel cell initial performance
Min Wang et al.
JOURNAL OF POWER SOURCES (2020)
Development of a 3-in-1 device to simultaneously measure properties of gas diffusion layer for the quality control of proton exchange membrane fuel cell components
Xiao-Zi Yuan et al.
JOURNAL OF POWER SOURCES (2020)
Methanol as antifreeze agent for cold start of automotive polymer electrolyte membrane fuel cells
Florian Knorr et al.
APPLIED ENERGY (2019)
The development of a through-plane reactive excitation technique for detection of pinholes in membrane-containing MEA sub-assemblies
Michael Ulsh et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)
Interesting Facets of Surface, Interfacial, and Bulk Characteristics of Perfluorinated lonomer Films
Kunal Karan
LANGMUIR (2019)
Four-dimensional joint visualization of electrode degradation and liquid water distribution inside operating polymer electrolyte fuel cells
Robin T. White et al.
SCIENTIFIC REPORTS (2019)
Correlated interfacial water transport and proton conductivity in perfluorosulfonic acid membranes
Xiao Ling et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2019)
Effect of compression on pore size distribution and porosity of PEM fuel cell catalyst layers
Ali Malekian et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)
Imaging ionomer in fuel cell catalyst layers with synchrotron nano transmission x-ray microscopy
Stanley J. Normile et al.
SOLID STATE IONICS (2019)
Dictating Pt-Based Electrocatalyst Performance in Polymer Electrolyte Fuel Cells, from Formulation to Application
Tim Van Cleve et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
Electronic conductivity of catalyst layers of polymer electrolyte membrane fuel cells: Through-plane vs. in-plane
Mohammad Ahadi et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)
Evolution of the Interfacial Structure of a Catalyst Ink with the Quality of the Dispersing Solvent: A Contrast Variation Small-Angle and Ultrasmall-Angle Neutron Scattering Investigation
Rajkamal Balu et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
A Novel Method for Humidity-Dependent Through-Plane Impedance Measurement for Proton Conducting Polymer Membranes
Patrick Heimerdinger et al.
MEMBRANES (2019)
Impact of Catalyst Ink Dispersing Methodology on Fuel Cell Performance Using in-Situ X-ray Scattering
Min Wang et al.
ACS APPLIED ENERGY MATERIALS (2019)
Heterogeneous Nanostructural Aging of Fuel Cell Ionomer Revealed by Operando SAXS
Nicolas Martinez et al.
ACS APPLIED ENERGY MATERIALS (2019)
Interaction of Pore Size and Hydrophobicity/Hydrophilicity for Improved Oxygen and Water Transport through Microporous Layers
Christoph Simon et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2019)
Measuring In Situ Interfacial Contact Resistance in a Proton Exchange Membrane Fuel Cell
Sigrid Laedre et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2019)
Impact of Microporous Layer Roughness on Gas-Diffusion-Electrode-Based Polymer Electrolyte Membrane Fuel Cell Performance
Min Wang et al.
ACS APPLIED ENERGY MATERIALS (2019)
Impact of Platinum Loading on Performance and Degradation of Polymer Electrolyte Fuel Cell Electrodes Studied in a Rainbow Stack
P. Gazdzicki et al.
FUEL CELLS (2018)
Influence of Water and Temperature onIonomer in Catalytic Layers and Membranes of Fuel Cells and Electrolyzers Evaluated by AFM
T. Morawietz et al.
FUEL CELLS (2018)
Impacts of electrode coating irregularities on polymer electrolyte membrane fuel cell lifetime using quasi in-situ infrared thermography and accelerated stress testing
Adam Phillips et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2018)
A review of the synthesis and characterization of anion exchange membranes
Kimberly F. L. Hagesteijn et al.
JOURNAL OF MATERIALS SCIENCE (2018)
Inherent Acidity of Perfluorosulfonic Acid Ionomer Dispersions and Implications for Ink Aggregation
Sarah A. Berlinger et al.
JOURNAL OF PHYSICAL CHEMISTRY B (2018)
Catalyst Layer Ink Interactions That Affect Coatability
Marm B. Dixit et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2018)
Membrane Accelerated Stress Test Development for Polymer Electrolyte Fuel Cell Durability Validated Using Field and Drive Cycle Testing
Rangachary Mukundan et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2018)
Correlation of Changes in Electrochemical and Structural Parameters due to Voltage Cycling Induced Degradation in PEM Fuel Cells
Alexander Kneer et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2018)
Predictive durability of polyethylene terephthalate toward hydrolysis over large temperature and relative humidity ranges
Florence Dubelley et al.
POLYMER (2018)
Degradation of Silicone Rubbers as Sealing Materials for Proton Exchange Membrane Fuel Cells under Temperature Cycling
Fan Wu et al.
POLYMERS (2018)
Structure-property relationships at Nafion thin-film interfaces: Thickness effects on hydration and anisotropic ion transport
Steven C. DeCaluwe et al.
NANO ENERGY (2018)
An opinion on catalyst degradation mechanisms during catalyst support focused accelerated stress test (AST) for proton exchange membrane fuel cells (PEMFCs)
Raghunandan Sharma et al.
APPLIED CATALYSIS B-ENVIRONMENTAL (2018)
Mechanical degradation of proton exchange membrane along the MEA frame in proton exchange membrane fuel cells
Diankai Qiu et al.
ENERGY (2018)
Rheological Investigation on the Microstructure of Fuel Cell Catalyst Inks
Sunilkumar Khandavalli et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
Utilizing a Segmented Fuel Cell to Study the Effects of Electrode Coating Irregularities on PEM Fuel Cell Initial Performance
A. Phillips et al.
FUEL CELLS (2017)
Structure failure of the sealing in the assembly process for proton exchange membrane fuel cells
Peng Liang et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)
Solvent effect on the Nafion agglomerate morphology in the catalyst layer of the proton exchange membrane fuel cells
Tae-Hyun Kim et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)
Thermo-mechanically stable sustainable polymer based solid electrolyte membranes for direct methanol fuel cell applications
Surendra Singh Gaur et al.
JOURNAL OF MEMBRANE SCIENCE (2017)
4D in situ visualization of electrode morphology changes during accelerated degradation in fuel cells by X-ray computed tomography
Robin T. White et al.
JOURNAL OF POWER SOURCES (2017)
Durability and degradation analysis of hydrocarbon ionomer membranes in polymer electrolyte fuel cells accelerated stress evaluation
Ryo Shimizu et al.
JOURNAL OF POWER SOURCES (2017)
Impact of Microporous Layer Pore Properties on Liquid Water Transport in PEM Fuel Cells: Carbon Black Type and Perforation
Christoph Simon et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)
Experimental and Theoretical Analysis of Ink Dispersion Stability for Polymer Electrolyte Fuel Cell Applications
S. Shukla et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)
Influence of the Gas Diffusion Layer Compression on the Oxygen Transport in PEM Fuel Cells at High Water Saturation Levels
Christoph Simon et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)
Microstructural Analysis and Transport Resistances of Low-Platinum-Loaded PEFC Electrodes
Firat C. Cetinbas et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)
Water sub-diffusion in membranes for fuel cells
Quentin Berrod et al.
SCIENTIFIC REPORTS (2017)
Understanding inks for porous-electrode formation
Kelsey B. Hatzell et al.
JOURNAL OF MATERIALS CHEMISTRY A (2017)
Current understanding of chemical degradation mechanisms of perfluorosulfonic acid membranes and their mitigation strategies: a review
M. Zaton et al.
SUSTAINABLE ENERGY & FUELS (2017)
Quantitative Mapping of Ionomer in Catalyst Layers by Electron and X-Ray Spectromicroscopy
L. G. A. Melo et al.
POLYMER ELECTROLYTE FUEL CELLS 17 (PEFC 17) (2017)
Quantitative in Situ Analysis of Ionomer Structure in Fuel Cell Catalytic Layers
Tobias Morawietz et al.
ACS APPLIED MATERIALS & INTERFACES (2016)
Temperature and humidity effect on aging of silicone rubbers as sealing materials for proton exchange membrane fuel cell applications
Huawei Chang et al.
APPLIED THERMAL ENGINEERING (2016)
Analysis of Catalyst Layer Microstructures: From Imaging to Performance
M. Sabharwal et al.
FUEL CELLS (2016)
Defect Detection in Fuel Cell Gas Diffusion Electrodes Using Infrared Thermography
M. Ulsh et al.
FUEL CELLS (2016)
Pore network modelling of condensation in gas diffusion layers of proton exchange membrane fuel cells
B. Straubhaar et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2016)
Effects of cure system and, filler on chemical aging behavior of fluoroelastomer in simulated proton exchange membrane fuel cell environment
Lichao Xia et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2016)
Fatigue properties of catalyst coated membranes for fuel cells: Ex-situ measurements supported by numerical simulations
R. M. H. Khorasany et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2016)
Improvement of hardness and compression set properties of EPDM seals with alternating multilayered structure for PEM fuel cells
Liyuan Shen et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2016)
Proton conductive and low methanol permeable PVA-based zwitterionic membranes
Liang Gao et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2016)
Influence of pH on the passivation behaviour of 904L stainless steel bipolar plates for proton exchange membrane fuel cells
Hong Luo et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2016)
The Priority and Challenge of High-Power Performance of Low-Platinum Proton-Exchange Membrane Fuel Cells
Anusorn Kongkanand et al.
JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2016)
Reactive impinging-flow technique for polymer-electrolyte-fuel-cell electrode-defect detection
Iryna V. Zenyuk et al.
JOURNAL OF POWER SOURCES (2016)
Evaluation of reversible and irreversible degradation rates of polymer electrolyte membrane fuel cells tested in automotive conditions
Pawel Gazdzick et al.
JOURNAL OF POWER SOURCES (2016)
The catalyst layer and its dimensionality - A look into its ingredients and how to characterize their effects
Nada Zamel
JOURNAL OF POWER SOURCES (2016)
Advanced Water Management in PEFCs: Diffusion Layers with Patterned Wettability I. Synthetic Routes, Wettability Tuning and Thermal Stability
Antoni Forner-Cuenca et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2016)
Advanced Water Management in PEFCs: Diffusion Layers with Patterned Wettability II. Measurement of Capillary Pressure Characteristic with Neutron and Synchrotron Imaging
A. Forner-Cuenca et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2016)
Statistical Analysis of Isothermal Cold Starts of PEFCs: Impact of Gas Diffusion Layer Properties
Johannes Biesdorf et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2016)
Measurement of a new parameter representing the gas transport properties of the catalyst layers of polymer electrolyte fuel cells
Hiroshi Iden et al.
PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2016)
Mitigation of Chemical Membrane Degradation in Fuel Cells: Understanding the Effect of Cell Voltage and Iron Ion Redox Cycle
Ka Hung Wong et al.
CHEMSUSCHEM (2015)
Influence of local carbon fibre orientation on the water transport in the gas diffusion layer of polymer electrolyte membrane fuel cells
Henning Markoetter et al.
ELECTROCHEMISTRY COMMUNICATIONS (2015)
Edge protection using polyacrylonitrile thin-films for hydrocarbon-based membrane electrode assemblies
Duk Man Yu et al.
JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2015)
Degradation of SS316L bipolar plates in simulated fuel cell environment: Corrosion rate, barrier film formation kinetics and contact resistance
Dionissios D. Papadias et al.
JOURNAL OF POWER SOURCES (2015)
Effects of short-side-chain perfluorosulfonic acid ionomers as binders on the performance of low Pt loading fuel cell cathodes
Young-Chul Park et al.
JOURNAL OF POWER SOURCES (2015)
Characterization of Ni-cermet degradation phenomena I. Long term resistivity monitoring, image processing and X-ray fluorescence analysis
M. V. Ananyev et al.
JOURNAL OF POWER SOURCES (2015)
X-ray photoelectron spectroscopy investigation on electrochemical degradation of proton exchange membrane fuel cell electrodes
Shuang Ma Andersen et al.
JOURNAL OF POWER SOURCES (2015)
Creep properties of catalyst coated membranes for polymer electrolyte fuel cells
Alireza Sadeghi Alavijeh et al.
JOURNAL OF POWER SOURCES (2015)
Composite proton exchange membranes based on phosphosilicate sol and sulfonated poly(ether ether ketone) for fuel cell applications
Qiang Xie et al.
JOURNAL OF POWER SOURCES (2015)
Effect of pinhole location on degradation in polymer electrolyte fuel cells
Merit Bodner et al.
JOURNAL OF POWER SOURCES (2015)
Impact of Hydrophobic Coating on Mass Transport Losses in PEFCs
J. Biesdorf et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2015)
Characterization of PEMFC Gas Diffusion Layer Porosity
Rinat R. Rashapov et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2015)
About the Interactions Controlling Nafion's Viscoelastic Properties and Morphology
Jan-Patrick Melchior et al.
MACROMOLECULES (2015)
Temperature-dependent leak tightness of elastomer seals after partial and rapid. release of compression
Tobias Grelle et al.
POLYMER TESTING (2015)
Morphology of Hydrated As-Cast Nafion Revealed through Cryo Electron Tomography
Frances I. Allen et al.
ACS MACRO LETTERS (2015)
Expanded graphite as a filler for epoxy matrix composites to improve their thermal, mechanical and electrical properties
Subhra Gantayat et al.
NEW CARBON MATERIALS (2015)
Fuel Cell Catalyst Layers: A Polymer Science Perspective
Steven Holdcroft
CHEMISTRY OF MATERIALS (2014)
Evaluation of Hydrogen Crossover through Fuel Cell Membranes
M. Schoemaker et al.
FUEL CELLS (2014)
Coupling of a continuum fuel cell model with a discrete liquid water percolation model
R. Alink et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2014)
Rapid detection of defects in fuel-cell electrodes using infrared reactive-flow-through technique
Prodip K. Das et al.
JOURNAL OF POWER SOURCES (2014)
The investigation of resin degradation in catalyst layer of proton exchange membrane fuel cell
Shaohua Xiao et al.
JOURNAL OF POWER SOURCES (2014)
Understanding the gas diffusion layer in proton exchange membrane fuel cells. I. How its structural characteristics affect diffusion and performance
Jason M. Morgan et al.
JOURNAL OF POWER SOURCES (2014)
Influence of the Distribution of Platinum Deposits on the Properties and Degradation of Platinum-Impregnated Nafion Membranes
Stefan Helmly et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2014)
Asymmetric bi-layer PFSA membranes as model systems for the study of water management in the PEMFC
A. Z. Peng et al.
PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2014)
Highly durable fuel cell electrodes based on ionomers dispersed in glycerol
Y. S. Kim et al.
PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2014)
Degradation of silicone rubbers with different hardness in various aqueous solutions
Jun Feng et al.
POLYMER DEGRADATION AND STABILITY (2014)
Three-dimensional analysis of Nafion layers in fuel cell electrodes
M. Lopez-Haro et al.
NATURE COMMUNICATIONS (2014)
Submicrometer 3D Structural Evidence of Fuel Cell Membrane Heterogeneous Degradation
Marco Maccarini et al.
ACS MACRO LETTERS (2014)
New developments in proton conducting membranes for fuel cells
Ryszard Wycisk et al.
CURRENT OPINION IN CHEMICAL ENGINEERING (2014)
A study of the effect of compression on the performance of polymer electrolyte fuel cells using electrochemical impedance spectroscopy and dimensional change analysis
Thomas J. Mason et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2013)
Effect of non-active area on the performance of subgasketed MEAs in PEMFC
Xinsheng Zhao et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2013)
Comparison of accelerated aging of silicone rubber gasket material with aging in a fuel cell environment
Sebnem Pehlivan-Davis et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2013)
The importance of water transport on short-side chain perfluorosulfonic acid membrane fuel cells operating under low relative humidity
Nana Zhao et al.
JOURNAL OF POWER SOURCES (2013)
A review on the sealing structures of membrane electrode assembly of proton exchange membrane fuel cells
Dong-hao Ye et al.
JOURNAL OF POWER SOURCES (2013)
Mechanical properties of Nafion 212 proton exchange membrane subjected to hygrothermal aging
Shouwen Shi et al.
JOURNAL OF POWER SOURCES (2013)
Effects of local gas diffusion layer gas permeability variations on spatial proton exchange membrane fuel cells performance
Tatyana V. Reshetenko et al.
JOURNAL OF POWER SOURCES (2013)
Mechanical properties of catalyst coated membranes for fuel cells
Marc-Antoni Goulet et al.
JOURNAL OF POWER SOURCES (2013)
Influence of the composition of isopropyl alcohol/water mixture solvents in catalyst ink solutions on proton exchange membrane fuel cell performance
Trung Truc Ngo et al.
JOURNAL OF POWER SOURCES (2013)
Depth-resolved micro-Raman spectroscopy of tri-layer PFSA membrane for PEM fuel cells: how to obtain reliable inner water contents
Z. Peng et al.
JOURNAL OF RAMAN SPECTROSCOPY (2013)
Multianalytical Study of the PTFE Content Local Variation of the PEMFC Gas Diffusion Layer
Tatyana V. Reshetenko et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2013)
Preparation and thermal degradation behavior of room temperature vulcanized silicone rubber-g-polyhedral oligomeric silsesquioxanes
Yufeng Liu et al.
POLYMER (2013)
The contact resistance between gas diffusion layers and bipolar plates as they are assembled in proton exchange membrane fuel cells
M. S. Ismail et al.
RENEWABLE ENERGY (2013)
The role of internal pressure for the hydration and transport properties of ionomers and polyelectrolytes
Klaus-Dieter Kreuer
SOLID STATE IONICS (2013)
Interfacial vs. Internal Water Transport Resistance of Sulfonated Hydrocarbon Proton-Exchange Membranes
Nana Zhao et al.
ECS ELECTROCHEMISTRY LETTERS (2013)
Defect Detection in Fuel Cell Gas Diffusion Electrodes Using Infrared Thermography
D. C. Bittinat et al.
POLYMER ELECTROLYTE FUEL CELLS 13 (PEFC 13) (2013)
Effects of local variations of the gas diffusion layer properties on PEMFC performance using a segmented cell system
Tatyana V. Reshetenko et al.
ELECTROCHIMICA ACTA (2012)
Application of a segmented cell setup to detect pinhole and catalyst loading defects in proton exchange membrane fuel cells
Tatyana V. Reshetenko et al.
ELECTROCHIMICA ACTA (2012)
Factors determining the gas crossover through pinholes in polymer electrolyte fuel cell membranes
Stefan Kreitmeier et al.
ELECTROCHIMICA ACTA (2012)
Contamination and moisture absorption effects on the mechanical properties of catalyst coated membranes in PEM fuel cells
Ruiliang Jia et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2012)
Through-plane thermal conductivity of the microporous layer in a polymer electrolyte membrane fuel cell
Grant Unsworth et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2012)
Correlation between anisotropic bending stiffness of GDL and land/channel width ratio of polymer electrolyte membrane fuel cells
Kyung Don Baik et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2012)
DSC and DVS Investigation of Water Mobility in Nafion/Zeolite Composite Membranes for Fuel Cell Applications
B. Mecheri et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2012)
Influence of the microporous layer on carbon corrosion in the catalyst layer of a polymer electrolyte membrane fuel cell
Dusan Spernjak et al.
JOURNAL OF POWER SOURCES (2012)
Applying infrared thermography as a quality-control tool for the rapid detection of polymer-electrolyte-membrane-fuel-cell catalyst-layer-thickness variations
Niccolo V. Aieta et al.
JOURNAL OF POWER SOURCES (2012)
Ex-situ characterisation of gas diffusion layers for proton exchange membrane fuel cells
Ahmad El-kharouf et al.
JOURNAL OF POWER SOURCES (2012)
Chemical aging of the silicone rubber in a simulated and three accelerated proton exchange membrane fuel cell environments
Guo Li et al.
JOURNAL OF POWER SOURCES (2012)
Impact of Water on PEFC Performance Evaluated by Neutron Imaging Combined with Pulsed Helox Operation
P. Boillat et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2012)
Spatially Resolved Contact Pressure and Contact Resistance Measurements at the Gas Diffusion Layer: A Tool for PEM Fuel Cell Development
Hanno Butsch et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2012)
Preparation of thermostable electroconductive composite plates from expanded graphite and polyimide
Tongmin Cui et al.
MATERIALS CHEMISTRY AND PHYSICS (2012)
Nafion in Dilute Solvent Systems: Dispersion or Solution?
Cynthia Welch et al.
ACS MACRO LETTERS (2012)
PEMFC Catalyst Layers: The Role of Micropores and Mesopores on Water Sorption and Fuel Cell Activity
Tatyana Soboleva et al.
ACS APPLIED MATERIALS & INTERFACES (2011)
Oxygen Mass Transport Limitations at the Cathode of Polymer Electrolyte Membrane Fuel Cells
Jay Benziger et al.
AICHE JOURNAL (2011)
Measurement of in-plane thermal conductivity of carbon paper diffusion media in the temperature range of-20 °C to+120 °C
Nada Zamel et al.
APPLIED ENERGY (2011)
The effects of pinholes on proton exchange membrane fuel cell performance
Weizhong Lue et al.
INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2011)
Influence of the bolt torque on PEFC performance with different gasket materials
I. Gatto et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2011)
Measurement of the through-plane thermal conductivity of carbon paper diffusion media for the temperature range from-50 to+120°C
Nada Zamel et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2011)
The Property and Performance Differences Between Catalyst Coated Membrane and Catalyst Coated Diffusion Media
Derek W. Fultz et al.
JOURNAL OF FUEL CELL SCIENCE AND TECHNOLOGY (2011)
In-Situ Measurement of Electroosmotic Drag Coefficient in Nafion Membrane for the PEMFC
Zhe Peng et al.
JOURNAL OF PHYSICAL CHEMISTRY B (2011)
Correlating Humidity-Dependent Ionically Conductive Surface Area with Transport Phenomena in Proton-Exchange Membranes
Qinggang He et al.
JOURNAL OF PHYSICAL CHEMISTRY B (2011)
Chemical degradation of five elastomeric seal materials in a simulated and an accelerated PEM fuel cell environment
Chih-Wei Lin et al.
JOURNAL OF POWER SOURCES (2011)
Catalyst layer optimization by surface tension control during ink formulation of membrane electrode assemblies in proton exchange membrane fuel cell
Rafael Nogueira Bonifacio et al.
JOURNAL OF POWER SOURCES (2011)
Kinetic study of Nafion degradation by Fenton reaction
Tomoko Sugawara et al.
JOURNAL OF POWER SOURCES (2011)
In-plane gas permeability of proton exchange membrane fuel cell gas diffusion layers
A. Tamayol et al.
JOURNAL OF POWER SOURCES (2011)
XPS investigations of the proton exchange membrane fuel cell active layers aging: Characterization of the mitigating role of an anodic CO contamination on cathode degradation
Valerie Parry et al.
JOURNAL OF POWER SOURCES (2011)
Effective thermal conductivity and thermal contact resistance of gas diffusion layers in proton exchange membrane fuel cells. Part 1: Effect of compressive load
E. Sadeghi et al.
JOURNAL OF POWER SOURCES (2011)
X-ray tomography of morphological changes after freeze/thaw in gas diffusion layers
Junho Je et al.
JOURNAL OF SYNCHROTRON RADIATION (2011)
Effects of Catalyst Carbon Support on Proton Conduction and Cathode Performance in PEM Fuel Cells
Yuxiu Liu et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2011)
Polymer membranes for high temperature proton exchange membrane fuel cell: Recent advances and challenges
Saswata Bose et al.
PROGRESS IN POLYMER SCIENCE (2011)
Permeability of a PEMFC Gas Diffusion Layer Based on Morphology
Enju Nishiyama et al.
POLYMER ELECTROLYTE FUEL CELLS 11 (2011)
Identification of Gas Diffusion Layer PTFE Content Local Anomalies Using a Segmented Cell System
Tatyana V. Reshetenko et al.
POLYMER ELECTROLYTE FUEL CELLS 11 (2011)
STXM Study of the Ionomer Distribution in PEM Fuel Cell Catalyst Layers
D. Susac et al.
POLYMER ELECTROLYTE FUEL CELLS 11 (2011)
On the Micro-, Meso- and Macroporous Structures of Polymer Electrolyte Membrane Fuel Cell Catalyst Layers
Tatyana Soboleva et al.
ACS APPLIED MATERIALS & INTERFACES (2010)
Structure-Morphology-Property Relationships of Non-Perfluorinated Proton-Conducting Membranes
Timothy J. Peckham et al.
ADVANCED MATERIALS (2010)
Measurement of through-plane effective thermal conductivity and contact resistance in PEM fuel cell diffusion media
G. Karimi et al.
ELECTROCHIMICA ACTA (2010)
Influence of ionomer content on the structure and performance of PEFC membrane electrode assemblies
Jian Xie et al.
ELECTROCHIMICA ACTA (2010)
Effects of microstructure characteristics of gas diffusion layer and microporous layer on the performance of PEMFC
Chung-Jen Tseng et al.
ENERGY CONVERSION AND MANAGEMENT (2010)
Determination of the pore size distribution of micro porous layer in PEMFC using pore forming agents under various drying conditions
Jeong Hwan Chun et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2010)
Corrosion of metal bipolar plates for PEM fuel cells: A review
Renato A. Antunes et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2010)
Electro-osmotic drag coefficient and proton conductivity in Nafion® membrane for PEMFC
Zhiping Luo et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2010)
Review of the proton exchange membranes for fuel cell applications
S. J. Peighambardoust et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2010)
Properties, degradation and high temperature fuel cell test of different types of PBI and PBI blend membranes
Q. F. Li et al.
JOURNAL OF MEMBRANE SCIENCE (2010)
Effect of polytetrafluoroethylene-treatment and microporous layer-coating on the electrical conductivity of gas diffusion layers used in proton exchange membrane fuel cells
M. S. Ismail et al.
JOURNAL OF POWER SOURCES (2010)
Ex situ evaluation of nanometer range gold coating on stainless steel substrate for automotive polymer electrolyte membrane fuel cell bipolar plate
A. Kumar et al.
JOURNAL OF POWER SOURCES (2010)
Measurement of relative permeability of fuel cell diffusion media
I. S. Hussaini et al.
JOURNAL OF POWER SOURCES (2010)
Water Transport Mechanisms in PEMFC Gas Diffusion Layers
Jon P. Owejan et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2010)
Mechanical properties of silicone rubber composed of diverse vinyl content silicone gums blending
Qiang Xu et al.
MATERIALS & DESIGN (2010)
Note: Determination of effective gas diffusion coefficients of stainless steel films with differently shaped holes using a Loschmidt diffusion cell
N. G. C. Astrath et al.
REVIEW OF SCIENTIFIC INSTRUMENTS (2010)
Effect of hydrophobicity and pore geometry in cathode GDL on PEM fuel cell performance
Sehkyu Park et al.
ELECTROCHIMICA ACTA (2009)
Influence of hot-pressing temperature on the performance of PEMFC and catalytic activity
Jing-Chie Lin et al.
JOURNAL OF APPLIED ELECTROCHEMISTRY (2009)
Uneven gas diffusion layer intrusion in gas channel arrays of proton exchange membrane fuel cell and its effects on flow distribution
S. G. Kandlikar et al.
JOURNAL OF POWER SOURCES (2009)
Characterization of water transport in gas diffusion media
Christian Quick et al.
JOURNAL OF POWER SOURCES (2009)
Characterisation of mechanical behaviour and coupled electrical properties of polymer electrolyte membrane fuel cell gas diffusion layers
J. Kleemann et al.
JOURNAL OF POWER SOURCES (2009)
A review of platinum-based catalyst layer degradation in proton exchange membrane fuel cells
Shengsheng Zhang et al.
JOURNAL OF POWER SOURCES (2009)
Measurement of Oxygen Transport Resistance in PEM Fuel Cells by Limiting Current Methods
Daniel R. Baker et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2009)
Anisotropic Diffusion and Morphology in Perfluorosulfonate Ionomers Investigated by NMR
Jing Li et al.
MACROMOLECULES (2009)
Chemical and mechanical stability of EPDM in a PEM fuel cell environment
Jinzhu Tan et al.
POLYMER DEGRADATION AND STABILITY (2009)
The operation characteristics of MEAs with pinholes for polymer electrolyte membrane fuel cells
Yong-Hun Cho et al.
ELECTROCHEMICAL AND SOLID STATE LETTERS (2008)
Contact resistance between gas diffusion layer and catalyst layer of PEM fuel cell
Iwao Nitta et al.
ELECTROCHEMISTRY COMMUNICATIONS (2008)
Diagnostic tools in PEM fuel cell research: Part II - Physical/chemical methods
Jinfieng Wu et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2008)
Diagnostic tools in PEM fuel cell research: Part I - Electrochemical techniques
Jinfieng Wu et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2008)
Effect of anisotropic thermal conductivity of the GDL and current collector rib width on two-phase transport in a PEM fuel cell
Chaitanya J. Bapat et al.
JOURNAL OF POWER SOURCES (2008)
Gas-crossover and membrane-pinhole effects in polymer-electrolyte fuel cells
Adam Z. Weber
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2008)
Assessment of mechanical properties of fluoroelastomer and EPDM in a simulated PEM fuel cell environment by micro indentation test
Jinzhu Tan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Properties of graphite-composite bipolar plate prepared by compression molding technique for PEM fuel cell
S. R. Dhakate et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2007)
Fabrication of high strength and a low weight composite bipolar plate for fuel cell applications
Priyanka H. Maheshwari et al.
JOURNAL OF POWER SOURCES (2007)
Degradation of silicone rubber under compression in a simulated PEM fuel cell environment
Jinzhu Tan et al.
JOURNAL OF POWER SOURCES (2007)
Scientific aspects of polymer electrolyte fuel cell durability and degradation
Rod Borup et al.
CHEMICAL REVIEWS (2007)
Inhomogeneous compression of PEMFC gas diffusion layer Part I. Experimental
Iwao Nitta et al.
JOURNAL OF POWER SOURCES (2007)
Investigation of water evolution and transport in fuel cells with high resolution synchrotron x-ray radiography
I. Manke et al.
APPLIED PHYSICS LETTERS (2007)
Development of bipolar plates for fuel cells from graphite filled wet-lay material and a thermoplastic laminate skin layer
Brent D. Cunningham et al.
JOURNAL OF POWER SOURCES (2007)
The preparation of Pt/C catalysts using various carbon materials for the cathode of PEMFC
Minsuk Kim et al.
JOURNAL OF POWER SOURCES (2006)
On the relative influence of convection in serpentine flow fields of PEM fuel cells
J. P. Feser et al.
JOURNAL OF POWER SOURCES (2006)
Degradation of polymer electrolyte membranes
Amanda Collier et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2006)
Automotive composite fuel cell bipolar plates: Hydrogen permeation concerns
Richard Blunk et al.
JOURNAL OF POWER SOURCES (2006)
Gas crossover and membrane degradation in polymer electrolyte fuel cells
Minoru Inaba et al.
ELECTROCHIMICA ACTA (2006)
Morphological features (defects) in fuel cell membrane electrode assemblies
S. Kundu et al.
JOURNAL OF POWER SOURCES (2006)
Characterization of PEMFCs gas diffusion layers properties
Sylvie Escribano et al.
JOURNAL OF POWER SOURCES (2006)
An overview of electro-osmosis in fuel cell polymer electrolytes
Bryan S. Pivovar
POLYMER (2006)
Stainless steels in bipolar plates - Surface resistive properties of corrosion resistant steel grades during current loads
A. K. Iversen
CORROSION SCIENCE (2006)
Bipolar plates for PEM fuel cells: A review
A Hermann et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2005)
Solid polymer electrolyte membranes for fuel cell applications - a review
B Smitha et al.
JOURNAL OF MEMBRANE SCIENCE (2005)
On the permeability of gas diffusion media used in PEM fuel cells
JG Pharoah
JOURNAL OF POWER SOURCES (2005)
Degradation of sealings for PEFC test cells during fuel cell operation
M Schulze et al.
JOURNAL OF POWER SOURCES (2004)
Mass production cost of PEM fuel cell by learning curve
H Tsuchiya et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2004)
State of understanding of Nafion
KA Mauritz et al.
CHEMICAL REVIEWS (2004)
Effect of pore structure of catalyst layer in a PEMFC on its performance
YG Yoon et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2003)
Stainless steel as bipolar plate material for polymer electrolyte membrane fuel cells
HL Wang et al.
JOURNAL OF POWER SOURCES (2003)
Review and analysis of PEM fuel cell design and manufacturing
V Mehta et al.
JOURNAL OF POWER SOURCES (2003)
Stainless steel as a bipolar plate material for solid polymer fuel cells
DP Davies et al.
JOURNAL OF POWER SOURCES (2000)
Bipolar plate materials for solid polymer fuel cells
DP Davies et al.
JOURNAL OF APPLIED ELECTROCHEMISTRY (2000)
分享论文
