Production and investigation of mechanical properties of graphene/polystyrene nano composites

Working with pristine polystyrene is a great challenge due to its poor mechanical properties and is a massive task to utilize for packaging and structural applications. This study includes the analysis and optimization of tensile properties of graphene-polystyrene nanocomposites membrane to determine the reinforcing effect of nanofiller on tensile properties. The two-dimensional (2D) graphene sheets and samples of graphene-polystyrene nanocomposites were fabricated by liquid exfoliation and solution casting technique, respectively. Nanocomposites were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), atomic force microscopy (AFM) and thermogravimetric analysis (TGA) to evaluate their morphology, crystallographic phases, topography and thermal stability, respectively. Effect of filler concentration (0.06-0.74 wt. %), sonication time after mixing (3.18 - 36.82 min) and sonication temperature (16.48 - 58.52 C) on ultimate tensile strength (UTS), percentage elongation and elastic modulus (E) were investigated and their responsive behavior was monitored respectively. In our experiment, it is shown that the concentration of graphene is a highly significant parameter. The optimized variables were found to be 0.60 wt. % of Graphene at 10 min of sonication time after mixing and 25 degrees C of sonication temperature. The obtained results demonstrate that the incorporation of graphene in the polystyrene matrix increases the mechanical properties of polystyrene. When compared with pristine polystyrene, the maximum increase witnessed in UTS, elongation and E was 97.36%, 82.70% and 174.08%, respectively.

Automated summary

The study focused on analyzing and optimizing the tensile properties of graphene-polystyrene nanocomposites, demonstrating that the incorporation of graphene in the polystyrene matrix significantly improves its mechanical properties. The concentration of graphene was identified as a critical parameter, with the optimized combination being 0.60 wt.% graphene, 10 minutes of sonication time post-mixing, and a sonication temperature of 25 degrees Celsius. The results showed a maximum increase of 97.36% in ultimate tensile strength, 82.70% in elongation, and 174.08% in elastic modulus compared to pristine polystyrene.