期刊
JOURNAL OF MATERIALS IN CIVIL ENGINEERING
卷 33, 期 4, 页码 -出版社
ASCE-AMER SOC CIVIL ENGINEERS
DOI: 10.1061/(ASCE)MT.1943-5533.0003594
关键词
Hydraulic asphalt concrete; Dynamic compressive behavior; Temperature sensitivity; Strain rate dependent; Failure modes
资金
- National Natural Science Foundation of China [51779208]
- Non-profit Industry Financial Program from the Ministry of Water Resources [201501034-03]
This study investigated the compressive behavior of Hydraulic asphalt concrete (HAC) under different temperatures and strain rates, revealing significant impacts on stress-strain characteristics and failure modes. The dynamic compressive strength, elastic modulus, and energy absorption capacity of HAC were found to increase with strain rate but decrease with temperature. Empirical formulas for temperature influence factors and dynamic increase factors of HAC's mechanical properties were proposed and successfully validated. The interaction between temperature and strain rate was considered in the establishment of a calculation model for compressive strength and elastic modulus based on the time-temperature superposition principle.
Hydraulic asphalt concrete (HAC) used as upstream facing of embankment dams is subjected to different temperatures and loading conditions. The main goal of this paper is to investigate the compressive behavior of HAC under different temperatures (-20 degrees C-30 degrees C) and strain rates (10(-5)-10(-2) s(-1)). The results showed that temperature and strain rate had significant impact not only on the stress-strain characteristics of HAC, but also on its failure modes. The dynamic compressive strength, elastic modulus, and energy absorption capacity increased with increasing strain rate, while they decreased with increasing temperature. The failure mode at a temperature range of 10 degrees C-30 degrees C was mainly in binder failure, whereas that at a range of -20 degrees C-5 degrees C was in binder failure and transaggregate failure, and the ratio of aggregate cracking increased with increasing strain rate from 10(-5)-10(-2) s(-1). Moreover, empirical formulas for temperature influence factors (TIFs) and dynamic increase factors (DIFs) of the compressive strength and elastic modulus of HAC were proposed and found to be in good agreement with test results. Finally, the calculation model of the compressive strength and elastic modulus, considering the interactions between temperature and strain rate, were successfully established based on the time-temperature superposition principle. (c) 2021 American Society of Civil Engineers.
作者
我是这篇论文的作者
点击您的名字以认领此论文并将其添加到您的个人资料中。
推荐
暂无数据