相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Green synthesis of reactive dye for ink-jet printing
Saira Faisal et al.
COLORATION TECHNOLOGY (2020)
On-Demand Printing of Wearable Thermotherapy Pad
Dong-Il Moon et al.
ADVANCED HEALTHCARE MATERIALS (2020)
Interaction of Reactive-Dye Chromophores and DEG on Ink-Jet Printing Performance
Liyuan Zhang et al.
MOLECULES (2020)
Aerogel-Based TiO2 Stable Inks for Direct Inkjet Printing of Nanostructured Layers
Aline M. Barreiro et al.
ADVANCES IN MATERIALS SCIENCE AND ENGINEERING (2020)
A New era of water treatment technologies: 3D printing for membranes
Numan Yanar et al.
JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2020)
Preparation of highly dispersible glass frit powders and its application in ink-jet printing ink
Ye Peng et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2020)
Infiltration of impacting droplets into porous substrates
D. J. Bouchard et al.
EXPERIMENTS IN FLUIDS (2020)
Inkjet printed silver nanoparticles on hydrophobic papers for efficient detection of thiram
Junli Duan et al.
SPECTROCHIMICA ACTA PART A-MOLECULAR AND BIOMOLECULAR SPECTROSCOPY (2020)
Assessing the Stability of Inkjet-Printed Carbon Nanotube for Brine Sensing Applications
Khalid Marbou et al.
JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY (2020)
Green synthesis of germanium nano ink and inkjet printing of Si/Ge heterostructure
Hemaprabha Elangovan et al.
MATERIALS RESEARCH BULLETIN (2020)
Preparation of ZnO quantum dots@SiO2/PVA for multifunctional coating on PET
Lei Ding et al.
NEW JOURNAL OF CHEMISTRY (2020)
Zirconia nano-colloids transfer from continuous hydrothermal synthesis to inkjet printing
M. Rosa et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2019)
Reactive inkjet printing of polyethylene glycol and isocyanate based inks to create porous polyurethane structures
Fabian Schuster et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2019)
Anti-periodic boundary value problems with Riesz-Caputo derivative
Fulai Chen et al.
ADVANCES IN DIFFERENCE EQUATIONS (2019)
Enhanced ink-absorption performance of inkjet printing paper-based patterns with core-shell-structure CaCO3@SiO2 pigments
Huanmei Wang et al.
NORDIC PULP & PAPER RESEARCH JOURNAL (2019)
High ink absorption performance of inkjet printing based on SiO2@Al-13 core-shell composites
YiFan Chen et al.
APPLIED SURFACE SCIENCE (2018)
Flow of liquids through paper
Brendan D. MacDonald
JOURNAL OF FLUID MECHANICS (2018)
PEDOT: PSS temperature sensor ink-jet printed on paper substrate
J. Maslik et al.
JOURNAL OF INSTRUMENTATION (2018)
Inkjet-Printed Chemical Solution Y2O3 Layers for Planarization of Technical Substrates
Marta Vilardell et al.
COATINGS (2017)
Preparation of silica/polyelectrolyte complexes for textile strengthening applied to painting canvas restoration
Krzysztof Kolman et al.
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2017)
In situ synthesis of In2S3@MIL-125(Ti) core-shell microparticle for the removal of tetracycline from wastewater by integrated adsorption and visible-light-driven photocatalysis
Hou Wang et al.
APPLIED CATALYSIS B-ENVIRONMENTAL (2016)
Adhesion of nitrile rubber to UV-assisted surface chemical modified PET fabric, part II: Interfacial characterization of MDI grafted PET
Mahmoud Razavizadeh et al.
APPLIED SURFACE SCIENCE (2016)
Inkjet printing of polyvinyl alcohol multilayers for additive manufacturing applications
Iulia Salaoru et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2016)
Preparation of styrene-γ-methacryloxypropyltrimethoxysilane/Pd nanoparticles as ink for ink-jet printing technology and electroless nickel plating on glass
Yan-Yu Nian et al.
JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2016)
Up-scaling of the manufacturing of all-inkjet-printed organic thin-film transistors: Device performance and manufacturing yield of transistor arrays
Enrico Sowade et al.
ORGANIC ELECTRONICS (2016)
Inkjet ink spreading on polyelectrolyte multilayers deposited on pigment coated paper
Katriina Mielonen et al.
JOURNAL OF COLLOID AND INTERFACE SCIENCE (2015)
Manufacture of sub-μm thin, particulate-based ITO layers by roller coating
Moritz Wegener et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2015)
UV-curable encapsulation of surface Modified organic pigments for inkjet printing of textiles
O. A. Hakeim et al.
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2014)
Study of the adsorption performance and preparation of functional nano-silica pigment particles
B. Jiang et al.
DYES AND PIGMENTS (2014)
Precision printing of gelatin utilizing electrostatic inkjet
Shinjiro Umezu
JAPANESE JOURNAL OF APPLIED PHYSICS (2014)
Efficient Inkjet Printing of Graphene
Jiantong Li et al.
ADVANCED MATERIALS (2013)
Pb(II) removal of Fe3O4@SiO2-NH2 core-shell nanomaterials prepared via a controllable sol-gel process
Jianming Zhang et al.
CHEMICAL ENGINEERING JOURNAL (2013)
Evaluation of Silica-Coated PCC as New Modified Filler for Papermaking
Ana F. Lourenco et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2013)
Long-Term Leukocyte Filtration Should Be Avoided during Extracorporeal Circulation
Jiali Tang et al.
MEDIATORS OF INFLAMMATION (2013)
Surface modification of inorganic nanoparticles for development of organic-inorganic nanocomposites-A review
Sarita Kango et al.
PROGRESS IN POLYMER SCIENCE (2013)
Inkjet-Printed Graphene Electronics
Felice Torrisi et al.
ACS NANO (2012)
A coating of silane modified silica nanoparticles on PET substrate film for inkjet printing
J. Wu et al.
APPLIED SURFACE SCIENCE (2012)
Short timescale inkjet ink component diffusion: An active part of the absorption mechanism into inkjet coatings
T. T. Lamminmaki et al.
JOURNAL OF COLLOID AND INTERFACE SCIENCE (2012)
Deposition of photocatalytically active TiO2 films by inkjet printing of TiO2 nanoparticle suspensions obtained from microwave-assisted hydrothermal synthesis
Melis Arin et al.
NANOTECHNOLOGY (2012)
Noncontact and rapid analysis of the quality of the recording coating on ink jet printing by near-infrared spectroscopy
B. Jiang et al.
ANALYST (2011)
The chromatographic separation of anionic dye in inkjet coating structures
T. T. Lamminmaki et al.
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2011)
Absorption Capability and Inkjet Ink Colorant Penetration into Binders Commonly Used in Pigmented Paper Coatings
T. T. Lamminmaki et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2011)
Preparation and Microcosmic Structural Analysis of Recording Coating on Inkjet Printing Media
Bo Jiang et al.
INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2011)
Rapid Analysis of the Quality of the Recording Coating on Ink Jet Printing in Preparation
B. Jiang et al.
JOURNAL OF PHYSICAL CHEMISTRY B (2011)
New modified filler obtained by silica formed by sol-gel method on calcium carbonate
Jose A. F. Gamelas et al.
JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY (2011)
Microscale droplet absorption into paper for inkjet printing
Anna Lundberg et al.
NORDIC PULP & PAPER RESEARCH JOURNAL (2011)
New approach to impart antibacterial effect and improve ink jet printing properties with modified SiO2 sols containing cationic biocides
Xuexin Wang et al.
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2010)
Preparation of poly (vinyl alcohol)/silica composite nanofibers membrane functionalized with mercapto groups by electrospinning
Shengju Wu et al.
MATERIALS LETTERS (2010)
A review of modified surfaces for high speed inkjet coating
John Kettle et al.
SURFACE & COATINGS TECHNOLOGY (2010)
The Effect of Base Paper and Coating Method on the Surface Roughness of Pigment Coatings
S. Wang et al.
JOURNAL OF DISPERSION SCIENCE AND TECHNOLOGY (2009)
Surface modification in microsystems and nanosystems
Shaurya Prakash et al.
SURFACE SCIENCE REPORTS (2009)
Modelling diffusion from simulated porous structures
G. M. Laudone et al.
CHEMICAL ENGINEERING SCIENCE (2008)
Study of the optical response of phase-change recording layer with zinc oxide nanostructured thin film
T. S. Kao et al.
JOURNAL OF MICROSCOPY (2008)
Inkjet printing as a deposition and patterning tool for polymers and inorganic particles
Emine Tekin et al.
SOFT MATTER (2008)
Surface modification of nanoscale fillers for improving properties of polymer nanocomposites: a review
M. Z. Rong et al.
MATERIALS SCIENCE AND TECHNOLOGY (2006)
Validation of ink media interaction mechanisms for dye and pigment-based aqueous and solvent inks
G. Desie et al.
JOURNAL OF IMAGING SCIENCE AND TECHNOLOGY (2006)
Correlating pore size and surface chemistry during absorption into a dispersed calcium carbonate network structure
Cathy J. Ridgway et al.
NORDIC PULP & PAPER RESEARCH JOURNAL (2006)
Patterning phase separation in polymer films with dip-pen nanolithography
DC Coffey et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2005)
Influence of anisotropy on the dynamic wetting and permeation of paper coatings
PA Bodurtha et al.
JOURNAL OF COLLOID AND INTERFACE SCIENCE (2005)
Inkjet printing of polymers: State of the art and future developments
BJ de Gans et al.
ADVANCED MATERIALS (2004)
Use of a chemically modified clay as a replacement for silica in matte coated ink-jet papers
JE Cawthorne et al.
JOURNAL OF COATINGS TECHNOLOGY (2003)
Inkjet printing for materials and devices
P Calvert
CHEMISTRY OF MATERIALS (2001)
Effect of polymer adsorption on the surface tension and flocculation of colloidal particles in incompatible solvents
N Dan
LANGMUIR (2000)
分享论文
