☆ 4.6 Article

High performance polylactic acid/thermoplastic polyurethane blends with in-situ fibrillated morphology

JOURNAL OF APPLIED POLYMER SCIENCE (2021)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Polymer Science

Facile preparation of light-weight biodegradable and electrically conductive polymer based nanocomposites for superior electromagnetic interference shielding effectiveness

Krishnendu Nath et al.

Summary: The study focused on the development of biodegradable EMI shielding polymer nanocomposites using conducting carbon black and a blend of polylactic acid and thermoplastic polyurethane, which showed excellent mechanical properties and improved thermal performance. The polymer nanocomposites demonstrated good EMI shielding effectiveness at X-band frequencies and satisfactory biodegradability through respirometry analysis.

JOURNAL OF APPLIED POLYMER SCIENCE (2021)

添加到收藏夹

Article Food Science & Technology

Biocomposites of PLA and Mango Seed Waste: Potential Material for Food Packaging and a Technological Alternative to Reduce Environmental Impact

Edla Maria Bezerra Lima et al.

Summary: This study aimed to develop a biocomposite based on PLA and mango's by-product for rigid packaging, finding that adding integument to the biocomposite significantly improved mechanical and barrier properties, making it a potential biomaterial for food packaging systems.

STARCH-STARKE (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

In-situ microfibrillated Poly(ε-caprolactone)/Poly(lactic acid) composites with enhanced rheological properties, crystallization kinetics and foaming ability

Yuhui Qiao et al.

Summary: The study found that the fibrillated PCL/PLA composites formed a 3D network of PLA fibers after hot-stretching, increasing the viscosity and storage modulus of the materials, and exhibited a solid-like behavior.

COMPOSITES PART B-ENGINEERING (2021)

添加到收藏夹

Article Materials Science, Composites

Green-plasticized poly(lactic acid)/nanofibrillated cellulose biocomposites with high strength, good toughness and excellent heat resistance

Linqiong Xu et al.

Summary: The study found that the addition of NFC significantly improved the strength and toughness of PLA composites, as well as enhanced their thermal stability. After ATBC plasticization, the strength and thermal properties of PLA/NFC composites did not decrease. Additionally, at 6 wt% NFC content, the strength and modulus of the prepared composites were comparable to pure PLA, with an increase in elongation and toughness by approximately 259% and 121%, respectively.

COMPOSITES SCIENCE AND TECHNOLOGY (2021)

添加到收藏夹

Article Engineering, Chemical

UV Reconfigurable Shape Memory Polyurethane with a High Recovery Ratio under Large Deformation

Jing Hu et al.

Summary: A new type of shape memory thermoplastic polyurethane (TPU) was developed in this research, with photoresponsive anthracene groups incorporated into the hard segment to control stability and recoverability. This material achieved a high shape-fixing/recovery ratio and good performance even under large deformation, as well as free construction of three-dimensional shapes through photodimerization of anthracene groups.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2021)

添加到收藏夹

Article Food Science & Technology

Thermoplastic starch and poly(vinyl alcohol) blends centered barrier film for food packaging applications

Changfeng Ge et al.

Summary: The study found that blends containing 25% or 75% TPS could serve as alternative barrier layers due to their relatively low material cost, good oxygen barrier performance and adequate material properties.

FOOD PACKAGING AND SHELF LIFE (2021)

添加到收藏夹

Article Engineering, Environmental

A molecularly engineered bioderived polyphosphate for enhanced flame retardant, UV-blocking and mechanical properties of poly(lactic acid)

Yan Zhang et al.

Summary: This study reports the synthesis of a novel multifunctional bioderived polyphosphate (PPD) using plant-derived diphenolic acid for PLA, which enables PLA to achieve desirable flame retardancy and high UV protection. Adding 6wt% of PPD results in a 31% increase in impact toughness and a slight improvement in tensile strength for PLA.

CHEMICAL ENGINEERING JOURNAL (2021)

添加到收藏夹

Article Chemistry, Physical

A hand-driven portable triboelectric nanogenerator using whirligig spinning dynamics

Yongjiu Zou et al.

Summary: The study introduces a portable hand-driven triboelectric nanogenerator that harvests energy from human biomechanical motions, providing a green power supply for wearable bioelectronics.

NANO ENERGY (2021)

添加到收藏夹

Review Materials Science, Multidisciplinary

Leveraging triboelectric nanogenerators for bioengineering

Songlin Zhang et al.

Summary: Global interest in wearable bioelectronics for monitoring human health status is rising, especially with the emergence of new diseases. While using wearable devices for personal health monitoring is becoming popular, finding practical healthcare solutions is becoming increasingly challenging with an aging population. Triboelectric nanogenerators show promise for sustainable power sources, active biomonitors, and electrical stimulation therapeutics in bioengineering applications, but there are challenges that need to be addressed in leveraging them for personalized healthcare.

MATTER (2021)

添加到收藏夹

Article Polymer Science

Poly(lactic acid) bio-composites containing biochar particles: Effects of fillers and plasticizer on crystallization and thermal properties

T. Haeldermans et al.

Summary: Biochar is commonly used as a filler material in biodegradable composites for its favorable thermal and mechanical properties. The study shows that as the biochar content increases in PLA/biochar composites, the thermal degradation temperature decreases, while in PLA/TPS/biochar composites, the impact of biochar is shielded by TPS. This work highlights the shielding effect TPS has on biochar and its potential for optimizing the production and biodegradability of these composites.

EXPRESS POLYMER LETTERS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Non-isothermal crystallization kinetics of polypropylene/polytetrafluoroethylene fibrillated composites

Yuhui Qiao et al.

Summary: The non-isothermal crystallization kinetics of PP/PTFE fibrillated composites were analyzed using the Mo equation, revealing that low PTFE content promoted fast nucleation while high PTFE content hindered crystal growth. Additionally, the PTFE nanofibers were found to significantly affect the crystallization behavior, leading to a decrease in the size of PP spherulites.

JOURNAL OF MATERIALS SCIENCE (2021)

添加到收藏夹

Article Chemistry, Physical

A linear-to-rotary hybrid nanogenerator for high-performance wearable biomechanical energy harvesting

Cheng Yan et al.

NANO ENERGY (2020)

添加到收藏夹

Review Chemistry, Multidisciplinary

Smart Textiles for Electricity Generation

Guorui Chen et al.

CHEMICAL REVIEWS (2020)

添加到收藏夹

Review Chemistry, Physical

Dynamic Mechanical Analysis Investigations of PLA-Based Renewable Materials: How Are They Useful?

Mariana Cristea et al.

MATERIALS (2020)

添加到收藏夹

Article Materials Science, Composites

Nanofibrillar green composites of polylactide/polyamide produced in situ due to shear induced crystallization

Ramin Hosseinnezhad et al.

COMPOSITES COMMUNICATIONS (2020)

添加到收藏夹

Review Materials Science, Composites

Composite Reinforcement Architectures: A Review of Field-Assisted Additive Manufacturing for Polymers

Madhuparna Roy et al.

JOURNAL OF COMPOSITES SCIENCE (2020)

添加到收藏夹

Review Chemistry, Multidisciplinary

Super tough poly(lactic acid) blends: a comprehensive review

Xipo Zhao et al.

RSC ADVANCES (2020)

添加到收藏夹

Review Biochemistry & Molecular Biology

Poly (lactic acid) blends: Processing, properties and applications

Mohammadreza Nofar et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2019)

添加到收藏夹

Review Polymer Science

Rheology of poly (lactic acid)-based systems

Mohammadreza Nofar et al.

POLYMER REVIEWS (2019)

添加到收藏夹

Review Engineering, Chemical

Thermoplastic polyurethanes derived from petrochemical or renewable resources: A comprehensive review

Janusz Datta et al.

POLYMER ENGINEERING AND SCIENCE (2018)

添加到收藏夹

Article Polymer Science

Influence of PLA stereocomplex crystals and thermal treatment temperature on the rheology and crystallization behavior of asymmetric poly(L-Lactide)/poly(D-lactide) blends

Xuetao Shi et al.

JOURNAL OF POLYMER RESEARCH (2018)

添加到收藏夹

Article Polymer Science

Direct observation of a stereocomplex crystallite network in the asymmetric polylactide enantiomeric blends

Jie Wang et al.

POLYMER (2018)

添加到收藏夹

Article Materials Science, Characterization & Testing

Morphology, rheological and crystallization behavior in thermoplastic polyurethane toughed poly(L-lactide) with stereocomplex crystallites

Yu-Dong Shi et al.

POLYMER TESTING (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

Remarkably Enhanced Impact Toughness and Heat Resistance of poly(L-Lactide)/Thermoplastic Polyurethane Blends by Constructing Stereocomplex Crystallites in the Matrix

Zhenwei Liu et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2016)

添加到收藏夹

Review Pharmacology & Pharmacy

Physical and mechanical properties of PLA, and their functions in widespread applications - A comprehensive review

Shady Farah et al.

ADVANCED DRUG DELIVERY REVIEWS (2016)

添加到收藏夹

Review Polymer Science

Recent advances in stereocomplexation of enantiomeric PLA-based copolymers and applications

Zibiao Li et al.

PROGRESS IN POLYMER SCIENCE (2016)

添加到收藏夹

Article Chemistry, Multidisciplinary

Stereocomplex crystallites induce simultaneous enhancement in impact toughness and heat resistance of injection-molded polylactide/polyurethane blends

Jia Dai et al.

RSC ADVANCES (2016)

添加到收藏夹

Article Polymer Science

Biocompatible fibers from thermoplastic polyurethane reinforced with polylactic acid microfibers

Vladislav Jaso et al.

EUROPEAN POLYMER JOURNAL (2015)

添加到收藏夹

Article Polymer Science

Effects of compatibility of poly(L-lactic-acid) and thermoplastic polyurethane on mechanical property of blend fiber

Dan-Ying Zuo et al.

POLYMERS FOR ADVANCED TECHNOLOGIES (2014)

添加到收藏夹

Article Polymer Science

Use of maleic anhydride compatibilization to improve toughness and other properties of polylactide blended with thermoplastic elastomers

Cevdet Kaynak et al.

POLYMERS FOR ADVANCED TECHNOLOGIES (2014)

添加到收藏夹

Review Polymer Science

Control of the hierarchical structure of polymer articles via structuring processing

Ke Wang et al.

PROGRESS IN POLYMER SCIENCE (2014)

添加到收藏夹

Review Materials Science, Multidisciplinary

Nano- and Microfibrillar Single-Polymer Composites: A Review

Stoyko Fakirov

MACROMOLECULAR MATERIALS AND ENGINEERING (2013)

添加到收藏夹

Article Polymer Science

Structure and blood compatibility of highly oriented poly(lactic acid)/thermoplastic polyurethane blends produced by solid hot stretching

Xiaowen Zhao et al.

POLYMERS FOR ADVANCED TECHNOLOGIES (2013)

添加到收藏夹

Article Nanoscience & Nanotechnology

Deformation of Confined Poly(ethylene oxide) in Multilayer Films

Chuan-Yar Lai et al.

ACS APPLIED MATERIALS & INTERFACES (2012)

添加到收藏夹

Article Polymer Science

Evidence of a dual network/spherulitic crystalline morphology in PLA stereocomplexes

Sajjad Saeidlou et al.

POLYMER (2012)

添加到收藏夹

Review Polymer Science

Realizing the enhancement of interfacial interaction in semicrystalline polymer/filler composites via interfacial crystallization

Nanying Ning et al.

PROGRESS IN POLYMER SCIENCE (2012)

添加到收藏夹

Article Engineering, Chemical

Supercritical Carbon Dioxide Induced Foaming of Highly Oriented Isotactic Polypropylene

Jin-Biao Bao et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2011)

添加到收藏夹

Article Materials Science, Multidisciplinary

Water Vapor Permeability of Poly(L-lactide)/Poly(D-lactide) Stereocomplexes

Hideto Tsuji et al.

MACROMOLECULAR MATERIALS AND ENGINEERING (2010)

添加到收藏夹

Article Polymer Science

Viscoelasticity and thermal stability of polylactide composites with various functionalized carbon nanotubes

Defeng Wu et al.

POLYMER DEGRADATION AND STABILITY (2008)

添加到收藏夹

Article Polymer Science

Stereoselective crystallization and specific interactions in polylactides

JR Sarasua et al.

MACROMOLECULES (2005)

添加到收藏夹

Article Polymer Science

Epitaxial crystallization and crystalline polymorphism of polylactides

L Cartier et al.

POLYMER (2000)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.