相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。An enhanced distortional-hardening-based constitutive model for hexagonal close-packed metals: Application to AZ31B magnesium alloy sheets at elevated temperatures
Jinwoo Lee et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2020)
Crystal plasticity modeling and neutron diffraction measurements of a magnesium AZ31B plate: Effects of plastic anisotropy and surrounding grains
Huamiao Wang et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2020)
On plastic anisotropy and deformation history-driven anelasticity of an extruded magnesium alloy
Huai Wang et al.
SCRIPTA MATERIALIA (2020)
{10(1)over-bar2} twinning behavior under biaxial tension of Mg-3Al-1Zn plate
Yao Cheng et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2020)
Effect of biaxial compressive stress state on the microstructure evolution and deformation compatibility of rolled sheet Mg alloy AZ31 at room temperature
Dabiao Xia et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Effect of pre-deformation on the activation stress of {10–12} twinning in Mg–3Al–1Zn alloy
Xiaoqian Guo et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Evolution of the 3D plastic anisotropy of HCP metals: Experiments and modeling
B. Kondori et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2019)
Twinning and detwinning behaviors of commercially pure titanium sheets
Chao Ma et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2019)
Comparative study on yield behavior and non-associated yield criteria of AZ31B and ZK61 M magnesium alloys
Zhigang Li et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Thermodynamically-consistent constitutive modeling of hardening asymmetry including isotropic ductile damage for Mg alloys
Kai Zhang et al.
EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2019)
Strain-Path Dependence of {10(1)over-bar2} Twinning in a Rolled Mg-3Al-1Zn Alloy: Influence of Twinning Model
Lingyu Zhao et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2019)
Fracture prediction based on a two-surface plasticity law for the anisotropic magnesium alloys AZ31 and ZE10
Jeong-Yeon Lee et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2018)
Strain rate sensitivities of deformation mechanisms in magnesium alloys
Huamiao Wang et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2018)
In-situ neutron diffraction of a quasicrystal-containing Mg alloy interpreted using a new polycrystal plasticity model of hardening due to {10.2} tensile twinning
S. R. Agnew et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2018)
A crystal plasticity model for describing the anisotropic hardening behavior of steel sheets during strain-path changes
Hwigeon Kim et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2018)
Robust multi objective optimization of anisotropic yield function coefficients
Kaushik Bandyopadhyay et al.
MATERIALS & DESIGN (2018)
Application of an Evolving Non-Associative Anisotropic-Asymmetric Plasticity Model for a Rare-Earth Magnesium Alloy
Armin Abedini et al.
METALS (2018)
Constitutive characterization of a rare-earth magnesium alloy sheet (ZEK100-O) in shear loading: Studies of anisotropy and rate sensitivity
A. Abedini et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2017)
Loading path dependent distortional hardening of Mg alloys: Experimental investigation and constitutive modeling
Baodong Shi et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2017)
A comparative study between micro- and macro-mechanical constitutive models developed for complex loading scenarios
Youngung Jeong et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2017)
Distortional hardening concept for modeling anisotropic/asymmetric plastic behavior of AZ31B magnesium alloy sheets
J. Lee et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2017)
Modeling of {10-12}-{10-12} secondary twinning in pre-compressed Mg alloy AZ31
H. Qiao et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Twin-induced hardening in extruded Mg alloy AM30
Hua Qiao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Modeling the deformation behavior of a rolled Mg alloy with the EVPSC-TDT model
Chao Ma et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Thermodynamically consistent constitutive modeling of distortional hardening for wrought Mg alloys under non-proportional loading
Baodong Shi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
On the rapid hardening and exhaustion of twinning in magnesium alloy
P. D. Wu et al.
ACTA MATERIALIA (2017)
Deformation behavior of Mg-8.5wt.%Al alloy under reverse loading investigated by in-situ neutron diffraction and elastic viscoplastic self-consistent modeling
H. Wang et al.
ACTA MATERIALIA (2016)
Mechanism-based modelling of plastic deformation in magnesium alloys
D. Steglich et al.
EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2016)
Modeling of tension-compression asymmetry and orthotropy on metallic materials: Numerical implementation and validation
P. D. Barros et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2016)
A virtual laboratory using high resolution crystal plasticity simulations to determine the initial yield surface for sheet metal forming operations
Haiming Zhang et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2016)
An elasto-plastic constitutive model for evolving asymmetric/anisotropic hardening behavior of AZ31B and ZEK100 magnesium alloy sheets considering monotonic and reverse loading paths
Waqas Muhammad et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2015)
Modeling twinning and detwinning behavior of Mg alloy ZK60A during monotonic and cyclic loading
H. Qiao et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2015)
Anisotropic yield criteria in σ-τ stress space for materials with yield asymmetry
Farhoud Kabirian et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2015)
On twinning and anisotropy in rolled Mg alloy AZ31 under uniaxial compression
X. Q. Guo et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2015)
Combined effects of anisotropy and tension-compression asymmetry on the torsional response of AZ31 Mg
Nitin Chandola et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2015)
Evaluation of elastic-viscoplastic self-consistent polycrystal plasticity models for zirconium alloys
H. Qiao et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2015)
A constitutive model of twin nucleation, propagation and growth in magnesium crystals
P. D. Wu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Numerical Assessment of the Role of Slip and Twinning in Magnesium Alloy AZ31B During Loading Path Reversal
Huamiao Wang et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2015)
Simulation of mechanical behavior of AZ31 magnesium alloy during twin-dominated large plastic deformation
Zhi-qiang Wang et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2015)
Investigation of deformation dynamics in a wrought magnesium alloy
Wei Wu et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2014)
Asymmetric yield function based on the stress invariants for pressure sensitive metals
Jeong Whan Yoon et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2014)
A practical constitutive model for AZ31B Mg alloy sheets with unusual stress-strain response
Ngoc-Trung Nguyen et al.
FINITE ELEMENTS IN ANALYSIS AND DESIGN (2013)
A crystal plasticity model for hexagonal close packed (HCP) crystals including twinning and de-twinning mechanisms
H. Wang et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2013)
Biaxial Deformation of the Magnesium Alloy AZ80
P. Tomlinson et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2013)
On the Swift effect and twinning in a rolled magnesium alloy under free-end torsion
X. Q. Guo et al.
SCRIPTA MATERIALIA (2013)
Crystal plasticity finite-element simulation of work-hardening behavior in a magnesium alloy sheet under biaxial tension
Takayuki Hama et al.
COMPUTATIONAL MATERIALS SCIENCE (2012)
Study of lattice strains in magnesium alloy AZ31 based on a large strain elastic-viscoplastic self-consistent polycrystal model
H. Wang et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2012)
Biaxial deformation behaviour of AZ31 magnesium alloy: Crystal-plasticity-based prediction and experimental validation
D. Steglich et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2012)
A constitutive model of twinning and detwinning for hexagonal close packed polycrystals
H. Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Material modeling of AZ31 Mg sheet considering variation of r-values and asymmetry of the yield locus
Mohammad Omar Andar et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Twinning-induced negative strain rate sensitivity in wrought Mg alloy AZ31
Y. B. Chun et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Negative lateral strain ratio induced by deformation twinning in magnesium alloy AZ31
Y. B. Chun et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Twinning-induced anomaly in the yield surface of highly textured Mg-3Al-1Zn plate
Y. B. Chun et al.
SCRIPTA MATERIALIA (2011)
Role of {10-12} twinning characteristics in the deformation behavior of a polycrystalline magnesium alloy
Seong-Gu Hong et al.
ACTA MATERIALIA (2010)
An efficient constitutive model for room-temperature, low-rate plasticity of annealed Mg AZ31B sheet
M. Li et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2010)
Evaluation of self-consistent polycrystal plasticity models for magnesium alloy AZ31B sheet
H. Wang et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2010)
A finite strain elastic-viscoplastic self-consistent model for polycrystalline materials
H. Wang et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2010)
Twinning-detwinning behavior during the strain-controlled low-cycle fatigue testing of a wrought magnesium alloy, ZK60A
L. Wu et al.
ACTA MATERIALIA (2008)
Orthotropic yield criteria for description of the anisotropy in tension and compression of sheet metals
B. Plunkett et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2008)
Constitutive modeling for anisotropic/asymmetric hardening behavior of magnesium alloy sheets
Myoung-Gyu Lee et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2008)
A practical two-surface plasticity model and its application to spring-back prediction
Myoung-Gyu Lee et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2007)
Orthotropic yield criterion for hexagonal closed packed metals
O Cazacu et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2006)
Microstructural features of rolled Mg-M-1Zn
MR Barnett et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2005)
Plastic anisotropy and the role of non-basal slip in magnesium alloy AZ31B
SR Agnew et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2005)
A criterion for description of anisotropy and yield differential effects in pressure-insensitive metals
O Cazacu et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2004)
Evaluation of anisotropic yield functions for aluminum sheets
PD Wu et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2003)