相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Experimental characterization and crystal plasticity modeling of anisotropy, tension-compression asymmetry, and texture evolution of additively manufactured Inconel 718 at room and elevated temperatures
Saeede Ghorbanpour et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2020)
Microstructural control in metal laser powder bed fusion additive manufacturing using laser beam shaping strategy
Rongpei Shi et al.
ACTA MATERIALIA (2020)
Anisotropic polycrystal plasticity due to microstructural heterogeneity: A multi-scale experimental and numerical study on additively manufactured metallic materials
S. Amir H. Motaman et al.
ACTA MATERIALIA (2020)
Integration of phase-field model and crystal plasticity for the prediction of process-structure-property relation of additively manufactured metallic materials
P. W. Liu et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2020)
Three-dimensional maps of geometrically necessary dislocation densities in additively manufactured Ni-based superalloy IN718
Wyatt A. Witzen et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2020)
Knowledge of process-structure-property relationships to engineer better heat treatments for laser powder bed fusion additive manufactured Inconel 718
Thomas G. Gallmeyer et al.
ADDITIVE MANUFACTURING (2020)
Controlling microstructure and mechanical properties of additively manufactured high-strength steels by tailored solidification
Patrick Koehnen et al.
ADDITIVE MANUFACTURING (2020)
DAMASK - The Dusseldorf Advanced Material Simulation Kit for modeling multi-physics crystal plasticity, thermal, and damage phenomena from the single crystal up to the component scale
F. Roters et al.
COMPUTATIONAL MATERIALS SCIENCE (2019)
Structural representation of additively manufactured 316L austenitic stainless steel
C. A. Bronkhorst et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2019)
Grain boundary strengthening of FCC polycrystals
R. Arturo Rubio et al.
JOURNAL OF MATERIALS RESEARCH (2019)
Anisotropic Mechanical Behavior of Additive Manufactured AISI 316L Steel
Yong-Deok Im et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2019)
Microstructure Evolution of Binary and Multicomponent Manganese Steels During Selective Laser Melting: Phase-Field Modeling and Experimental Validation
Julia Kundin et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2019)
Numerical microstructure prediction by a coupled finite element cellular automaton model for selective electron beam melting
J. A. Koepf et al.
COMPUTATIONAL MATERIALS SCIENCE (2019)
A cellular automaton finite volume method for microstructure evolution during additive manufacturing
Yanping Lian et al.
MATERIALS & DESIGN (2019)
Effects of build orientation and heat treatment on the evolution of microstructure and mechanical properties of alloy Mar-M-509 fabricated via laser powder bed fusion
Nicholas C. Ferreri et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2019)
An analysis of phase stresses in additively manufactured 304L stainless steel using neutron diffraction measurements and crystal plasticity finite element simulations
Reeju Pokharel et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2019)
New perspectives on the grain-size dependent yield strength of polycrystalline metals
Claudio V. Di Leo et al.
SCRIPTA MATERIALIA (2019)
Microstructural constitutive model for polycrystal viscoplasticity in cold and warm regimes based on continuum dislocation dynamics
S. Amir H. Motaman et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2019)
Strengthening mechanisms in directed energy deposited austenitic stainless steel
Thale R. Smith et al.
ACTA MATERIALIA (2019)
Understanding the process-microstructure correlations for tailoring the mechanical properties of L-PBF produced austenitic advanced high strength steel
Patrick Kohnen et al.
ADDITIVE MANUFACTURING (2019)
Comprehensive study on mechanisms for grain morphology evolution and texture development in powder bed fusion with electron beam of Co-Cr-Mo alloy
Yufan Zhao et al.
MATERIALIA (2019)
Additively manufactured hierarchical stainless steels with high strength and ductility
Y. Morris Wang et al.
NATURE MATERIALS (2018)
3D multi-layer grain structure simulation of powder bed fusion additive manufacturing
Johannes A. Koepf et al.
ACTA MATERIALIA (2018)
An analysis of the influence of grain size on the strength of FCC polycrystals by means of computational homogenization
Sarra Haouala et al.
ACTA MATERIALIA (2018)
Twinning-induced plasticity (TWIP) steels
Bruno C. De Cooman et al.
ACTA MATERIALIA (2018)
Metal Alloys for Fusion-Based Additive Manufacturing
Duyao Zhang et al.
ADVANCED ENGINEERING MATERIALS (2018)
Numerical investigation of effects of nucleation mechanisms on grain structure in metal additive manufacturing
Xuxiao Li et al.
COMPUTATIONAL MATERIALS SCIENCE (2018)
A parallelized three-dimensional cellular automaton model for grain growth during additive manufacturing
Yanping Lian et al.
COMPUTATIONAL MECHANICS (2018)
An integrated crystal plasticity-phase field model for spatially resolved twin nucleation, propagation, and growth in hexagonal materials
C. Liu et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2018)
Effect of heat treatment on microstructure, mechanical and corrosion properties of austenitic stainless steel 316L using arc additive manufacturing
Xiaohui Chen et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Dislocation network in additive manufactured steel breaks strength-ductility trade-off
Leifeng Liu et al.
MATERIALS TODAY (2018)
Additive manufacturing of metallic components - Process, structure and properties
T. DebRoy et al.
PROGRESS IN MATERIALS SCIENCE (2018)
Remarkable transitions of yield behavior and Luders deformation in pure Cu by changing grain sizes
Y. Z. Tian et al.
SCRIPTA MATERIALIA (2018)
Anisotropy and heterogeneity of microstructure and mechanical properties in metal additive manufacturing: A critical review
Y. Kok et al.
MATERIALS & DESIGN (2018)
Design of high-manganese steels for additive manufacturing applications with energy-absorption functionality
Fabian Kies et al.
MATERIALS & DESIGN (2018)
Revealing mechanisms of residual stress development in additive manufacturing via digital image correlation
Jamison L. Bartlett et al.
ADDITIVE MANUFACTURING (2018)
Additively manufactured tantalum microstructures
Veronica Livescu et al.
MATERIALIA (2018)
A crystal plasticity model incorporating the effects of precipitates in superalloys: Application to tensile, compressive, and cyclic deformation of Inconel 718
Saeede Ghorbanpour et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2017)
Effect of dislocation density-twin interactions on twin growth in AZ31 as revealed by explicit crystal plasticity finite element modeling
Milan Ardeljan et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2017)
Scanning strategies for texture and anisotropy tailoring during selective laser melting of TiC/316L stainless steel nanocomposites
Bandar AlMangour et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Twinning induced plasticity in austenitic stainless steel 316L made by additive manufacturing
M. S. Pham et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Combining thermodynamic modeling and 3D printing of elemental powder blends for high-throughput investigation of high-entropy alloys - Towards rapid alloy screening and design
Christian Haase et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
In Situ Neutron Diffraction Study of the Influence of Microstructure on the Mechanical Response of Additively Manufactured 304L Stainless Steel
D. W. Brown et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2017)
Exploiting Process-Related Advantages of Selective Laser Melting for the Production of High-Manganese Steel
Christian Haase et al.
MATERIALS (2017)
Simulation of grain structure evolution during powder bed based additive manufacturing
Abha Rai et al.
ADDITIVE MANUFACTURING (2017)
Modeling of additive manufacturing processes for metals: Challenges and opportunities
M. M. Francois et al.
CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE (2017)
Simulation of metal additive manufacturing microstructures using kinetic Monte Carlo
Theron M. Rodgers et al.
COMPUTATIONAL MATERIALS SCIENCE (2017)
Modulating laser intensity profile ellipticity for microstructural control during metal additive manufacturing
Tien T. Roehling et al.
ACTA MATERIALIA (2017)
Numerical analysis of twin thickening process in magnesium alloys
Filip Siska et al.
ACTA MATERIALIA (2017)
A crystal plasticity model for twinning- and transformation-induced plasticity
Su Leen Wong et al.
ACTA MATERIALIA (2016)
Microstructure and strength of selectively laser melted AlSi10Mg
J. Wu et al.
ACTA MATERIALIA (2016)
Metallurgy of high-silicon steel parts produced using Selective Laser Melting
Michele Garibaldi et al.
ACTA MATERIALIA (2016)
Effect of processing parameters on microstructure and tensile properties of austenitic stainless steel 304L made by directed energy deposition additive manufacturing
Zhuqing Wang et al.
ACTA MATERIALIA (2016)
Origin of grain orientation during solidification of an aluminum alloy
H. L. Wei et al.
ACTA MATERIALIA (2016)
Additive manufacturing of metals
Dirk Herzog et al.
ACTA MATERIALIA (2016)
Numerical modeling of heat-transfer and the influence of process parameters on tailoring the grain morphology of IN718 in electron beam additive manufacturing
Narendran Raghavan et al.
ACTA MATERIALIA (2016)
Perspectives on Additive Manufacturing
David L. Bourell
ANNUAL REVIEW OF MATERIALS RESEARCH, VOL 46 (2016)
Microstructural Control of Additively Manufactured Metallic Materials
P. C. Collins et al.
ANNUAL REVIEW OF MATERIALS RESEARCH, VOL 46 (2016)
A coupled Cellular Automaton-Lattice Boltzmann model for grain structure simulation during additive manufacturing
Abha Rai et al.
COMPUTATIONAL MATERIALS SCIENCE (2016)
Probabilistic fracture of Ti-6Al-4V made through additive layer manufacturing
Thomas Tancogne-Dejean et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2016)
The metallurgy and processing science of metal additive manufacturing
W. J. Sames et al.
INTERNATIONAL MATERIALS REVIEWS (2016)
Grain morphology control and texture characterization of laser solid formed Ti6Al2Sn2Zr3Mo1.5Cr2Nb titanium alloy
Q. Zhang et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2016)
Intragranular cellular segregation network structure strengthening 316L stainless steel prepared by selective laser melting
Yuan Zhong et al.
JOURNAL OF NUCLEAR MATERIALS (2016)
Grain structure evolution in Inconel 718 during selective electron beam melting
H. Helmer et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Texture and anisotropy in selective laser melting of NiTi alloy
S. Dadbakhsh et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Tailoring the texture of IN738LC processed by selective laser melting (SLM) by specific scanning strategies
Fabian Geiger et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Grain size effects on dislocation and twinning mediated plasticity in magnesium
Haidong Fan et al.
SCRIPTA MATERIALIA (2016)
Grain neighbour effects on twin transmission in hexagonal close-packed materials
M. Arul Kumar et al.
NATURE COMMUNICATIONS (2016)
Orientations - perfectly colored
G. Nolze et al.
JOURNAL OF APPLIED CRYSTALLOGRAPHY (2016)
Evolution of grain structure during laser additive manufacturing. Simulation by a cellular automata method
A. Zinoviev et al.
MATERIALS & DESIGN (2016)
A coupled finite element cellular automaton model to predict thermal history and grain morphology of Ti-6Al-4V during direct metal deposition (DMD)
Jingwei Zhang et al.
ADDITIVE MANUFACTURING (2016)
Size and orientation effects in partial dislocation-mediated deformation of twinning-induced plasticity steel micro-pillars
Won Seok Choi et al.
ACTA MATERIALIA (2015)
Anisotropic tensile behavior of Ti-6Al-4V components fabricated with directed energy deposition additive manufacturing
Beth E. Carroll et al.
ACTA MATERIALIA (2015)
Explicit incorporation of deformation twins into crystal plasticity finite element models
Milan Ardeljan et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2015)
Euler angles and crystal symmetry
Gert Nolze
CRYSTAL RESEARCH AND TECHNOLOGY (2015)
Textures formed in a CoCrMo alloy by selective laser melting
Xin Zhou et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
Effects of process time interval and heat treatment on the mechanical and microstructural properties of direct laser deposited 316L stainless steel
Aref Yadollahi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Laser powder bed fusion additive manufacturing of metals; physics, computational, and materials challenges
W. E. King et al.
APPLIED PHYSICS REVIEWS (2015)
Crystallographic texture engineering through novel melt strategies via electron beam melting: Inconel 718
R. R. Dehoff et al.
MATERIALS SCIENCE AND TECHNOLOGY (2015)
Applying the texture analysis for optimizing thermomechanical treatment of high manganese twinning-induced plasticity steel
Christian Haase et al.
ACTA MATERIALIA (2014)
Build direction dependence of microstructure and high-temperature tensile property of Co-Cr-Mo alloy fabricated by electron beam melting
Shi-Hai Sun et al.
ACTA MATERIALIA (2014)
Metal Additive Manufacturing: A Review
William E. Frazier
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2014)
Microstructural and texture development in direct laser fabricated IN718
Lakshmi L. Parimi et al.
MATERIALS CHARACTERIZATION (2014)
On the Texture Formation of Selective Laser Melted Ti-6Al-4V
Marco Simonelli et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2014)
An Experimental Investigation into Additive Manufacturing-Induced Residual Stresses in 316L Stainless Steel
Amanda S. Wu et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2014)
Strong morphological and crystallographic texture and resulting yield strength anisotropy in selective laser melted tantalum
Lore Thijs et al.
ACTA MATERIALIA (2013)
Temperature dependence of the flow stress of Fe-18Mn-0.6C-xA1 twinning-induced plasticity steel
Il-Chan Jung et al.
ACTA MATERIALIA (2013)
Revealing the strain-hardening behavior of twinning-induced plasticity steels: Theory, simulations, experiments
David R. Steinmetz et al.
ACTA MATERIALIA (2013)
Fine-structured aluminium products with controllable texture by selective laser melting of pre-alloyed AlSi10Mg powder
Lore Thijs et al.
ACTA MATERIALIA (2013)
Energy input effect on morphology and microstructure of selective laser melting single track from metallic powder
I. Yadroitsev et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2013)
Effect of build geometry on the β-grain structure and texture in additive manufacture of Ti-6Al-4V by selective electron beam melting
A. A. Antonysamy et al.
MATERIALS CHARACTERIZATION (2013)
Hall-Petch relation for deformation twinning in solid solution magnesium alloys
Hidetoshi Somekawa et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Elastic properties of face-centred cubic Fe-Mn-C studied by nanoindentation and ab initio calculations
S. Reeh et al.
ACTA MATERIALIA (2012)
Laser additive manufacturing of metallic components: materials, processes and mechanisms
D. D. Gu et al.
INTERNATIONAL MATERIALS REVIEWS (2012)
Microstructural and mechanical approaches of the selective laser melting process applied to a nickel-base superalloy
T. Vilaro et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Deformation twinning in nanocrystalline materials
Y. T. Zhu et al.
PROGRESS IN MATERIALS SCIENCE (2012)
Sensitivity of deformation twinning to grain size in titanium and magnesium
Alireza Ghaderi et al.
ACTA MATERIALIA (2011)
Dislocation and twin substructure evolution during strain hardening of an Fe-22 wt.% Mn-0.6 wt.% C TWIP steel observed by electron channeling contrast imaging
I. Gutierrez-Urrutia et al.
ACTA MATERIALIA (2011)
Grain detection from 2d and 3d EBSD data-Specification of the MTEX algorithm
Florian Bachmann et al.
ULTRAMICROSCOPY (2011)
Activated states for cross-slip at screw dislocation intersections in face-centered cubic nickel and copper via atomistic simulation
S. I. Rao et al.
ACTA MATERIALIA (2010)
Strong crystal size effect on deformation twinning
Qian Yu et al.
NATURE (2010)
Statistical analyses of deformation twinning in magnesium
I. J. Beyerlein et al.
PHILOSOPHICAL MAGAZINE (2010)
A probabilistic twin nucleation model for HCP polycrystalline metals
I. J. Beyerlein et al.
PROCEEDINGS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES (2010)
Strengthening mechanisms in nanostructured high-purity aluminium deformed to high strain and annealed
Naoya Kamikawa et al.
ACTA MATERIALIA (2009)
Derivation and Variation in Composition-Dependent Stacking Fault Energy Maps Based on Subregular Solution Model in High-Manganese Steels
A. Saeed-Akbari et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2009)
A framework for automated analysis and simulation of 3D polycrystalline micro structures. Part 2: Synthetic structure generation
Michael Groeber et al.
ACTA MATERIALIA (2008)
Modeling dislocation storage rates and mean free paths in face-centered cubic crystals
L. Kubin et al.
ACTA MATERIALIA (2008)
A framework for automated analysis and simulation of 3D polycrystalline micro structures. Part 1: Statistical characterization
Michael Groeber et al.
ACTA MATERIALIA (2008)
A novel pole figure inversion method: specification of the MTEX algorithm
R. Hielscher et al.
JOURNAL OF APPLIED CRYSTALLOGRAPHY (2008)
Grain size effects on the tensile properties and deformation mechanisms of a magnesium alloy, AZ31B, sheet
A. Jain et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Influence of addition elements on the stacking-fault energy and mechanical properties of an austenitic Fe-Mn-C steel
A. Dumay et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Inverse grain-size effect on twinning in nanocrystalline Ni
X. L. Wu et al.
PHYSICAL REVIEW LETTERS (2008)
Dislocation mean free paths and strain hardening of crystals
B. Devincre et al.
SCIENCE (2008)
Elastic properties of Fe-Mn random alloys studied by ab initio calculations
Denis Music et al.
APPLIED PHYSICS LETTERS (2007)
Collinear superjogs and the low-stress response of fcc crystals
B. Devincre et al.
SCRIPTA MATERIALIA (2007)
Crystal plasticity modeling of deformation and creep in polycrystalline Ti-6242
Dhyanjyoti Deka et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2006)
Physical analyses of crystal plasticity by DD simulations
B Devincre et al.
SCRIPTA MATERIALIA (2006)
A simple relationship between Luders elongation and work-hardening rate at lower yield stress
N Tsuchida et al.
SCRIPTA MATERIALIA (2006)
Transition of tensile deformation behaviors in ultrafine-grained aluminum
CY Yu et al.
ACTA MATERIALIA (2005)
A physical model of the twinning-induced plasticity effect in a high manganese austenitic steel
S Allain et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)
Correlations between the calculated stacking fault energy and the plasticity mechanisms in Fe-Mn-C alloys
S Allain et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)
Statistically representative three-dimensional microstructures based on orthogonal observation sections
DM Saylor et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2004)
Nucleation and growth of deformation twins in nanocrystalline aluminum
YT Zhu et al.
APPLIED PHYSICS LETTERS (2004)
Deformation mechanism transitions in nanoscale fcc metals
RJ Asaro et al.
PHILOSOPHICAL MAGAZINE LETTERS (2003)
Influence of grain size on tensile properties of Al-Mgalloys
DJ Lloyd et al.
MATERIALS SCIENCE AND TECHNOLOGY (2003)
Deformation twinning in nanocrystalline aluminum
MW Chen et al.
SCIENCE (2003)
Geometrically necessary boundaries, incidental dislocation boundaries and geometrically necessary dislocations
DA Hughes et al.
SCRIPTA MATERIALIA (2003)
Strength and ductility of ultrafine grained aluminum and iron produced by ARB and annealing
N Tsuji et al.
SCRIPTA MATERIALIA (2002)
Microstructure refinement and mechanical properties of severely deformed Al-Mg-Li alloys
ZC Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2002)
Understanding creep - a review
W Blum et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2002)
Modelling of TWIP effect on work-hardening
O Bouaziz et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2001)
Work hardening in heterogeneous alloys - A microstructural approach based on three internal state variables
F Roters et al.
ACTA MATERIALIA (2000)
Effect of grain size on tensile behaviour of a submicron grained Al-3 wt-%Mg alloy produced by severe deformation
JS Hayes et al.
MATERIALS SCIENCE AND TECHNOLOGY (2000)
Determination of the of rate cross slip of screw dislocations
T Vegge et al.
PHYSICAL REVIEW LETTERS (2000)