相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Optimization and evaluation of dry and minimum quantity lubricating methods on machinability of AISI 4140 using Taguchi design and ANOVA
Huseyin Gurbuz et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2021)
Investigation of signal behaviors for sensor fusion with tool condition monitoring system in turning
Mustafa Kuntoglu et al.
MEASUREMENT (2021)
A Review of Indirect Tool Condition Monitoring Systems and Decision-Making Methods in Turning: Critical Analysis and Trends
Mustafa Kuntoglu et al.
SENSORS (2021)
Tribological behavior of textured tools in sustainable turning of nickel based super alloy
Munish Kumar Gupta et al.
TRIBOLOGY INTERNATIONAL (2021)
Cutting tool wear in turning 316L stainless steel in the conditions of minimized lubrication
Natalia Szczotkarz et al.
TRIBOLOGY INTERNATIONAL (2021)
Thermal and surface analysis of copper-CNT and copper-graphene-based composite using Taguchi-Grey relational analysis
S. Prabhu et al.
AUSTRALIAN JOURNAL OF MECHANICAL ENGINEERING (2021)
Enhancing mechanical properties of pure copper-based materials with CrxOy nanoparticles and CNT hybrid reinforcement
Xiangyang Chen et al.
JOURNAL OF MATERIALS SCIENCE (2021)
Neuro-fuzzy predictive model for surface roughness and cutting force of machined Al-20 Mg2Si-2Cu metal matrix composite using additives
Mohsen Marani et al.
NEURAL COMPUTING & APPLICATIONS (2020)
Experimental investigation on the mechanical, structural and thermal properties of Cu-ZrO2 nanocomposites hybridized by graphene nanoplatelets
M. S. Abd-Elwahed et al.
CERAMICS INTERNATIONAL (2020)
A comparative investigation of Taguchi and full factorial design for machinability prediction in turning of a titanium alloy
John D. Kechagias et al.
MEASUREMENT (2020)
Investigation of hard turning performance of eco-friendly cooling strategies: Cryogenic cooling and nanofluid based MQL
Cagri Vakkas Yildirim
TRIBOLOGY INTERNATIONAL (2020)
Optimization and analysis of process parameters for flank wear, cutting forces and vibration in turning of AISI 5140: A comprehensive study
Abdullah Aslan
MEASUREMENT (2020)
Effects of Turning Parameters and Parametric Optimization of the Cutting Forces in Machining SiCp/Al 45 wt% Composite
Rashid Ali Laghari et al.
METALS (2020)
Optimization and Analysis of Surface Roughness, Flank Wear and 5 Different Sensorial Data via Tool Condition Monitoring System in Turning of AISI 5140
Mustafa Kuntoglu et al.
SENSORS (2020)
Tool wear progression and its effects on energy consumption and surface roughness in cryogenic assisted turning of Ti-6Al-4V
Chetan Agrawal et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)
Influence of the nanostructure of Ti-TiN-(Ti,Al,Cr)N multilayer composite coating on tribological properties and cutting tool life
Alexey Vereschaka et al.
TRIBOLOGY INTERNATIONAL (2020)
Modeling of Cutting Parameters and Tool Geometry for Multi-Criteria Optimization of Surface Roughness and Vibration via Response Surface Methodology in Turning of AISI 5140 Steel
Mustafa Kuntoglu et al.
MATERIALS (2020)
Microstructural and Mechanical Properties of Cu-Based Co-Mo-Reinforced Composites Produced by the Powder Metallurgy Method
Emine Sap
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2020)
Experimental investigation on surface roughness, tool wear and cutting force in turning of hybrid (Al7075+SiC + Gr) metal matrix composites
A. Kannan et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
Investigation of mechanical characteristics of GFRP composites produced from chopped glass fiber and application of taguchi methods to turning operations
Yahya Hisman Celik et al.
SN APPLIED SCIENCES (2020)
Optimizing the machining variables in CNC turning of aluminum based hybrid metal matrix composites
Ravi Butola et al.
SN APPLIED SCIENCES (2020)
Investigations, analysis and performance comparison of uncoated CNMG 120408 TTR and coated 12040822 carbide tools during dry turning of Al-SiCp nano composites
Pradyut Kumar Swain et al.
MATERIALS TODAY-PROCEEDINGS (2020)
Optimization of turning parameters in sugarcane bagasse ash reinforced with Al-Si10-Mg alloy composites by Taguchi method
N. Kawin et al.
MATERIALS TODAY-PROCEEDINGS (2020)
Optimization of machining process parameters in CNC turning process of IS2062 E250 Steel using coated carbide cutting tool
B. Radha Krishnan et al.
MATERIALS TODAY-PROCEEDINGS (2020)
Experimental study and analysis of machinability characteristics of metal matrix composites during drilling
Emin Salur et al.
COMPOSITES PART B-ENGINEERING (2019)
Enhanced machinability of SiC-reinforced metal-matrix composite with hybrid turning
Wei Bai et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2019)
Investigation of progressive tool wear for determining of optimized machining parameters in turning
Mustafa Kuntoglu et al.
MEASUREMENT (2019)
Comparison of effect of SiC and MoS2 on wear behavior of Al matrix composites
Mohammad Rouhi et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2019)
Machinability analysis and application of response surface approach on CNC turning of LM6/SiCp composites
K. Balasubramanian et al.
MATERIALS AND MANUFACTURING PROCESSES (2019)
Green machining of powder-metallurgy-steels (PMS): An overview
Harshal Kulkarni et al.
JOURNAL OF MANUFACTURING PROCESSES (2019)
A review on machining and optimization of particle-reinforced metal matrix composites
Jianguang Li et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Influence of Different Grades of CBN Inserts on Cutting Force and Surface Roughness of AISI H13 Die Tool Steel during Hard Turning Operation
Pardeep Kumar et al.
MATERIALS (2019)
Experimental Investigation on Cutting Tool Performance of Newly Synthesized P/M Alloy Steel Under Turning Operation
T. Panneerselvam et al.
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING (2019)
Surface Modification of Ti6Al4V Alloy Using EDMed Electrode Made with Nano- and Micron-Sized TiC/Cu Powder Particles
Venkata Rao Chundru et al.
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING (2019)
Optimum milling parameters for production of highly uniform metal-matrix nanocomposites with improved mechanical properties
A. Wagih et al.
ADVANCED POWDER TECHNOLOGY (2018)
Turning titanium metal matrix composites (Ti-MMCs) with carbide and CBN inserts
Seyed Ali Niknam et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
An approach to cleaner production for machining hardened steel using different cooling-lubrication conditions
Mozammel Mia et al.
JOURNAL OF CLEANER PRODUCTION (2018)
Turning characteristics of in situ formed TiB2 ceramic particulate reinforced AA7075 aluminum matrix composites using polycrystalline diamond cutting tool
A. Pugazhenthi et al.
MEASUREMENT (2018)
Taguchi S/N based optimization of machining parameters for surface roughness, tool wear and material removal rate in hard turning under MQL cutting condition
Mozammel Mia et al.
MEASUREMENT (2018)
Tribological behavior of self lubricating Cu/MoS2 composites fabricated by powder metallurgy
Mohammad Moazami-Goudarzi et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2018)
Evaluation of Mechanical and Tribological Behavior of Al-4 %Cu-x %SiC Composites Prepared Through Powder Metallurgy Technique
V. Selvakumar et al.
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS (2017)
Machinability characteristics, thermal and mechanical properties of Al-Mg2Si in-situ composite with bismuth
Mohsen Marani Barzani et al.
MEASUREMENT (2017)
Tribological behavior of copper-molybdenum disulfide composites
Jin-Kun Xiao et al.
WEAR (2017)
Synthesis and Machining Characterization of Copper-Multiwalled Carbon Nanotubes-Graphene Hybrid Composite Using SEM and ANOVA
S. Nallusamy et al.
JOURNAL OF NANO RESEARCH (2017)
被撤回的出版物: Optimization of machining parameters and cutting fluids during nano-fluid based minimum quantity lubrication turning of titanium alloy by using evolutionary techniques (Retracted article. See vol. 391, 2023)
Munish Kumar Gupta et al.
JOURNAL OF CLEANER PRODUCTION (2016)
A review of empirical modeling techniques to optimize machining parameters for hard turning applications
J. S. Dureja et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2016)
Surface Roughness and Microhardness Evaluation for EDM with Cu-Mn Powder Metallurgy Tool
Amoljit Singh Gill et al.
MATERIALS AND MANUFACTURING PROCESSES (2016)
Machinability evaluation of Al-4%Cu-7.5%SiC metal matrix composite by Taguchi-Grey relational analysis and NSGA-II
V. Selvakumar et al.
SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES (2016)
SiC content effect on the properties of Cu-SiC composites produced by mechanical alloying
A. S. Prosviryakov
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
Multi-response optimization of minimum quantity lubrication parameters using Taguchi-based grey relational analysis in turning of difficult-to-cut alloy Haynes 25
Murat Sarikaya et al.
JOURNAL OF CLEANER PRODUCTION (2015)
CHIP FORMATION CHARACTERIZATION AND TEM INVESTIGATION OF WORN PCBN TOOL DURING HARD TURNING
Kehinde Sobiyi et al.
MACHINING SCIENCE AND TECHNOLOGY (2015)
Investigating the Machinability of Al-Si-Cu cast alloy containing bismuth and antimony using coated carbide insert
Mohsen Marani Barzani et al.
MEASUREMENT (2015)
Evaluation of cutting force and surface roughness in the dry turning of Al-Mg2Si in-situ metal matrix composite inoculated with bismuth using DOE approach
Abbas Razavykia et al.
MEASUREMENT (2015)
Surface roughness analysis on the dry turning of an Al-Cu alloy
A. Torres et al.
MESIC MANUFACTURING ENGINEERING SOCIETY INTERNATIONAL CONFERENCE 2015 (2015)
Experimental investigation and analysis of thrust force in drilling cast hybrid metal matrix (Al-15%SiC-4%graphite) composites
K. Palanikumar et al.
MEASUREMENT (2014)
Characterisation of powder metallurgy Cu-ZrO2 composites
M. Khaloobagheri et al.
Advances in Production Engineering & Management (2014)
Optimisation of machining and geometrical parameters in turning process using Taguchi method
N. Senthilkumar et al.
AUSTRALIAN JOURNAL OF MECHANICAL ENGINEERING (2014)
Physical Properties of Copper Based MMC Strengthened with Alumina
J. W. Kaczmar et al.
ARCHIVES OF FOUNDRY ENGINEERING (2014)
Characterization of friction properties at the workmaterial/cutting tool interface during the machining of randomly structured carbon fibers reinforced polymer with carbide tools under dry conditions
Olga Klinkova et al.
TRIBOLOGY INTERNATIONAL (2011)
Study on tool wear and surface roughness in machining of particulate aluminum metal matrix composite-response surface methodology approach
M. Seeman et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2010)
The effect of free-machining elements on dry machining of B319 aluminum alloy
J. M. Dasch et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2009)
Investigation of mechanical and machinability properties of SiC particle reinforced Al-MMC
Tamer Ozben et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2008)
Machinability issues in turning of Al-SiC (10p) metal matrix composites
N. Muthukrishnan et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2008)
Effects of cutting edge geometry, workpiece hardness, feed rate and cutting speed on surface roughness and forces in finish turning of hardened AISI H13 steel
T Özel et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2005)