4.5 Article

Pure mode I and pure mode II fracture resistance of modified hot mix asphalt at low and intermediate temperatures

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Construction & Building Technology

Experimental investigation of the effect of Micro Silica on roller compacted concrete pavement made of recycled asphalt pavement materials

Mohammad Reza Rezaei et al.

Summary: The study found that adding Recycled Asphalt Pavement (RAP) to Roller Compacted Concrete (RCC) reduced its mechanical strength. However, adding Micro Silica (MS) at a 50% RAP replacement rate increased the mechanical strength of RCC, including compressive strength.

INTERNATIONAL JOURNAL OF PAVEMENT ENGINEERING (2022)

Article Engineering, Mechanical

Specimen type effect on measured low-temperature fracture toughness of asphalt concrete

N. Shahryari et al.

Summary: The study investigated the Mode I fracture resistance of two asphalt mixtures, showing that increasing the loading rate, reducing the test temperature, and adding LDPE additive can improve fracture resistance. Furthermore, the influence of specimen geometry and loading type on the measured critical stress intensity factors was observed, demonstrating the effect of specimen type on Mode I fracture behavior.

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2021)

Article Engineering, Mechanical

KIc and KIIc measurement for hot mix asphalt mixtures at low temperature: Experimental and theoretical study using the semicircular bend specimen with different thicknesses

Yuan Xiongzhou et al.

Summary: The research experimentally and theoretically investigated the pure mode I and mode II fracture toughness of asphalt mixture, showing that reducing test temperature increases fracture toughness and 50mm thickness is more suitable for fracture study, with mode II specimen fracture load significantly greater than mode I load.

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2021)

Article Engineering, Mechanical

Heterogeneity effect on fracture parameters of a multilayer asphalt pavement structure containing a top-down crack and subjected to moving traffic loading

M. R. M. Aliha et al.

Summary: The study investigated the effect of various factors on top-down cracks in the multilayer pavement structure, finding significant differences between heterogeneous modeling and homogeneous simulation results. The position of the crack tip significantly affected stress intensity factors and T-stress.

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2021)

Article Construction & Building Technology

Crack resistance of hot mix asphalt containing different percentages of reclaimed asphalt pavement and glass fiber

Hassan Ziari et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Article Construction & Building Technology

Characterizing the SBS polymer degradation within high content polymer modified asphalt using ATR-FTIR

Chuanqi Yan et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Article Construction & Building Technology

Low-temperature crack resistance of coal gangue powder and polyester fibre asphalt mixture

Rong-bao Hong et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Article Engineering, Mechanical

Heterogeneity effects on mixed-mode I/II stress intensity factors and fracture path of laboratory asphalt mixtures in the shape of SCB specimen

M. R. M. Aliha et al.

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2020)

Article Engineering, Mechanical

The effect of basalt fibres on fracture toughness of asphalt mixture

Sadjad Pirmohammad et al.

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2020)

Article Engineering, Civil

Technical, Economic, and Environmental Investigation of the Effects of Rubber Powder Additive on Asphalt Mixtures

Mohammad Zarei et al.

JOURNAL OF TRANSPORTATION ENGINEERING PART B-PAVEMENTS (2020)

Article Construction & Building Technology

Fracture properties of asphalt mixtures containing electric arc furnace slag at low and intermediate temperatures

S. M. Motevalizadeh et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Review Construction & Building Technology

Low temperature performance characteristics of polyethylene modified asphalts - A review

Zhenyu Du et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Article Multidisciplinary Sciences

Simultaneous effects of ethyl vinyl acetate (EVA) and glass fiber on the properties of the hot mix asphalt (HMA)

Omid Janmohammadi et al.

SN APPLIED SCIENCES (2020)

Article Multidisciplinary Sciences

The effect of lignin on mechanical and dynamical properties of asphalt mixtures

Mohsen Zahedi et al.

SN APPLIED SCIENCES (2020)

Article Multidisciplinary Sciences

Experimental determination of the optimum percentage of asphalt mixtures reinforced with Lignin

Mohsen Zahedi et al.

SN APPLIED SCIENCES (2020)

Article Agricultural Engineering

A concise review of current lignin production, applications, products and their environmental impact

D. S. Bajwa et al.

INDUSTRIAL CROPS AND PRODUCTS (2019)

Article Multidisciplinary Sciences

Evaluation of the Effect of Lignin and Glass Fiber on the Technical Properties of Asphalt Mixtures

Ali Zarei et al.

ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING (2019)

Article Construction & Building Technology

Development of an index to evaluate the cracking potential of asphalt mixtures using the semi-circular bending test

Fawaz Kaseer et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Article Metallurgy & Metallurgical Engineering

Some physical and chemical characteristics of calcium lignosulphonate-bound coal fines

C. A. Strydom et al.

JOURNAL OF THE SOUTHERN AFRICAN INSTITUTE OF MINING AND METALLURGY (2018)

Article Mechanics

Comparison of fracture test standards for a super pave dense-graded hot mix asphalt

Calvin Maurice Stewart et al.

ENGINEERING FRACTURE MECHANICS (2017)

Article Construction & Building Technology

Comprehensive evaluation of low-temperature fracture indices for asphalt mixtures

Yuefeng Zhu et al.

ROAD MATERIALS AND PAVEMENT DESIGN (2017)

Article Construction & Building Technology

Study on affecting factors of interface crack for asphalt mixture based on microstructure

Lan Wang et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

Article Construction & Building Technology

Crack and crack growth behavior analysis of asphalt mixtures based on the digital speckle correlation method

Li Chao et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

Article Materials Science, Multidisciplinary

Damage Evolution and Crack Propagation in Semicircular Bending Asphalt Mixture Specimens

Guowei Zeng et al.

ACTA MECHANICA SOLIDA SINICA (2016)

Article Mechanics

Strain-based criteria for mixed-mode fracture of polycrystalline graphite

M. M. Mirsayar et al.

ENGINEERING FRACTURE MECHANICS (2016)

Article Engineering, Mechanical

Investigation of fatigue and fracture properties of asphalt mixtures modified with carbon nanotubes

M. Ameri et al.

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2016)

Article Construction & Building Technology

Effect of temperature and air void on mixed mode fracture toughness of modified asphalt mixtures

M. R. M. Aliha et al.

CONSTRUCTION AND BUILDING MATERIALS (2015)

Article Materials Science, Multidisciplinary

Determination of mode III fracture toughness for different materials using a new designed test configuration

M. R. M. Aliha et al.

MATERIALS & DESIGN (2015)

Article Construction & Building Technology

Simulation of damage evolution and crack propagation in three-point bending pre-cracked asphalt mixture beam

Guowei Zeng et al.

CONSTRUCTION AND BUILDING MATERIALS (2014)

Article Construction & Building Technology

Study of characteristic specification on mixed mode fracture toughness of asphalt mixtures

M. R. M. Aliha et al.

CONSTRUCTION AND BUILDING MATERIALS (2014)

Article Engineering, Mechanical

Numerical Analyses of a Cracked Straight-Through Flattened Brazilian Disk Specimen under Mixed-Mode Loading

M. R. M. Aliha et al.

JOURNAL OF ENGINEERING MECHANICS (2014)

Article Materials Science, Characterization & Testing

Rate- and Temperature-Dependent Fracture Characteristics of Asphaltic Paving Mixtures

Soohyok Im et al.

JOURNAL OF TESTING AND EVALUATION (2013)

Proceedings Paper Construction & Building Technology

Experimental Fracture Toughness Study for Some Modified Asphalt Mixtures

Hamid Behbahani et al.

INNOVATION AND SUSTAINABLE TECHNOLOGY IN ROAD AND AIRFIELD PAVEMENT (2013)

Article Construction & Building Technology

A first-principles based chemophysical environment for studying lignins as an asphalt antioxidant

Tongyan Pan

CONSTRUCTION AND BUILDING MATERIALS (2012)

Article Mechanics

Mixed mode fracture resistance of asphalt concrete mixtures

M. Ameni et al.

ENGINEERING FRACTURE MECHANICS (2012)

Article Construction & Building Technology

Laboratory Mixed-Mode Cracking of Asphalt Concrete Using the Single-Edge Notch Beam

Andrew Braham et al.

Road Materials and Pavement Design (2012)

Article Mechanics

An improved semi-circular bend specimen for investigating mixed mode brittle fracture

M. R. Ayatollahi et al.

ENGINEERING FRACTURE MECHANICS (2011)

Article Mechanics

Cracked asphalt pavement under traffic loading - A 3D finite element analysis

M. Ameri et al.

ENGINEERING FRACTURE MECHANICS (2011)

Article Construction & Building Technology

Research on Material Composition and Performance of Porous Asphalt Pavement

Qingquan Liu et al.

JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2009)

Article Construction & Building Technology

The effect of asphalt mixture gradation and compaction energy on aggregate degradation

G. D. Airey et al.

CONSTRUCTION AND BUILDING MATERIALS (2008)

Article Construction & Building Technology

Properties of gap-aggregate gradation asphalt mixture and permanent deformation

DH Shen et al.

CONSTRUCTION AND BUILDING MATERIALS (2005)