相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Physicochemical and antimicrobial properties of in situ crosslinked alginate/hydroxypropyl methylcellulose/ε-polylysine films
Tatiana Schafranski Blachechen et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2020)
End-Group Chemistry and Junction Chemistry in Polymer Science: Past, Present, and Future
Jihoon Kim et al.
MACROMOLECULES (2020)
Fabrication and evaluation of Olopatadine hydrochloride ocular inserts
Junaid Qureshi et al.
JOURNAL OF PLASTIC FILM & SHEETING (2020)
Hydrogel Biomaterials for Application in Ocular Drug Delivery
Courtney R. Lynch et al.
FRONTIERS IN BIOENGINEERING AND BIOTECHNOLOGY (2020)
Dually functional hollow ceria nanoparticle platform for intraocular drug delivery: A push beyond the limits of static and dynamic ocular barriers toward glaucoma therapy
Li-Jyuan Luo et al.
BIOMATERIALS (2020)
LiQD Cornea: Pro-regeneration collagen mimetics as patches and alternatives to corneal transplantation
Christopher D. McTiernan et al.
SCIENCE ADVANCES (2020)
Topical ocular pharmacokinetics and bioavailability for a cocktail of atenolol, timolol and betaxolol in rabbits
Anam Fayyaz et al.
EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2020)
The states of water in tryptophan grafted hydroxypropyl methylcellulose hydrogels and their effect on the adsorption of methylene blue and rhodamine B
Paulo V. O. Toledo et al.
CARBOHYDRATE POLYMERS (2020)
Design principles of ocular drug delivery systems: importance of drug payload, release rate, and material properties
Astrid Subrizi et al.
DRUG DISCOVERY TODAY (2019)
Interactions Between Paracetamol and Hypromellose in the Solid State
Edyta Leyk et al.
FRONTIERS IN PHARMACOLOGY (2019)
A novel FK506 loaded nanomicelles consisting of amino-terminated poly (ethylene glycol)-block-poly(D,L)-lactic acid and hydroxypropyl methylcellulose for ocular drug delivery
Dong Liu et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2019)
Thermosensitive hydrogel containing sertaconazole loaded nanostructured lipid carriers for potential treatment of fungal keratitis
Naser Tavakoli et al.
PHARMACEUTICAL DEVELOPMENT AND TECHNOLOGY (2019)
Development and evaluation of performance characteristics of timolol-loaded composite ocular films as potential delivery platforms for treatment of glaucoma
Mohammad Tighsazzadeh et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2019)
Comment on: Effect of Riboflavin Solution With Hydroxypropyl Methylcellulose and Eyelid Speculum on Pachymetry Changes During Accelerated Collagen Crosslinking
Deepali Singhal et al.
CORNEA (2019)
Advanced Formulation Approaches for Ocular Drug Delivery: State-Of-The-Art and Recent Patents
Eliana B. Souto et al.
PHARMACEUTICS (2019)
Superior outcome of corneal collagen cross-linking using riboflavin with methylcellulose than riboflavin with dextran as the main supplement
Andreas Thorsrud et al.
ACTA OPHTHALMOLOGICA (2019)
Preparation and study of two kinds of ophthalmic nano-preparations of everolimus
Zhan Tang et al.
DRUG DELIVERY (2019)
Hydroxypropyl methylcellulose 2% for dry eye prevention during phacoemulsification in senile and diabetic patients
Maierhaba Yusufu et al.
INTERNATIONAL OPHTHALMOLOGY (2018)
Multi-purposable filaments of HPMC for 3D printing of medications with tailored drug release and timed-absorption
Hossam Kadry et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2018)
β-Cyclodextrin hydroxypropyl methylcellulose hydrogels for bisphenol A adsorption
Icaro F. T. de Souza et al.
JOURNAL OF MOLECULAR LIQUIDS (2018)
Three-Dimensional Printing of Wood-Derived Biopolymers: A Review Focused on Biomedical Applications
Wenyang Xu et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2018)
Freeze-dried matrices for ocular administration of bevacizumab: comparison between subconjunctival and intravitreal administration in rabbits
Susi Burgalassi et al.
DRUG DELIVERY AND TRANSLATIONAL RESEARCH (2018)
Nanodispersion-loaded mucoadhesive polymeric inserts for prolonged treatment of post-operative ocular inflammation
Nadia Morsi et al.
JOURNAL OF MICROENCAPSULATION (2017)
The improvement of dry eye after cataract surgery by intraoperative using ophthalmic viscosurgical devices on the surface of cornea The results of a consort-compliant randomized controlled trial
Yuan He et al.
MEDICINE (2017)
Hydrophobically Modified Polymer/α-Cyclodextrin Thermoresponsive Hydrogels for Use in Ocular Drug Delivery
Daisuke Iohara et al.
MOLECULAR PHARMACEUTICS (2017)
Phenylephrine 10% mydriatic effect: comparison between self instillation of eye drop in open eyes and spray in closed eyes
Arlindo José Freire Portes et al.
Revista brasileira de oftalmologia (2017)
Establishment of an experimental glaucoma animal model: A comparison of microbead injection with or without hydroxypropyl methylcellulose
Hanhan Liu et al.
EXPERIMENTAL AND THERAPEUTIC MEDICINE (2017)
Hydroxypropyl Methylcellulose Sponges for the Adsorption of Estrogenic Pollutant
Stephanie D. Novaes et al.
CHEMPLUSCHEM (2017)
Creation of nano eye-drops and effective drug delivery to the interior of the eye
Yoshikazu Ikuta et al.
SCIENTIFIC REPORTS (2017)
Glucose, not cellobiose, is the repeating unit of cellulose and why that is important
Alfred D. French
CELLULOSE (2017)
The role of hydroxypropyl methylcellulose structural parameters on the stability of emulsions containing Spirulina biomass
Robson T. Shimada et al.
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2017)
Hybrid magnetic scaffolds: The role of scaffolds charge on the cell proliferation and Ca2+ ions permeation
Pollyana S. Castro et al.
COLLOIDS AND SURFACES B-BIOINTERFACES (2017)
Sustainable hydroxypropyl methylcellulose/xyloglucan/gentamicin films with antimicrobial properties
Stalin Kondaveeti et al.
CARBOHYDRATE POLYMERS (2017)
Hydroxypropyl methylcellulose based aerogels: Synthesis, characterization and application as adsorbents for wastewater pollutants
Bianca F. Martins et al.
CARBOHYDRATE POLYMERS (2017)
Influence of interfacial and bulk properties of cellulose ethers on lipolysis of oil-in-water emulsions
Amelia Torcello-Gomez et al.
CARBOHYDRATE POLYMERS (2016)
Composite bi-layered erodible films for potential ocular drug delivery
J. S. Boateng et al.
COLLOIDS AND SURFACES B-BIOINTERFACES (2016)
Modifying release characteristics from 3D printed drug-eluting products
Johan Boetker et al.
EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2016)
Hot-melt extruded filaments based on pharmaceutical grade polymers for 3D printing by fused deposition modeling
Alice Melocchi et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2016)
Formulation and In Vitro Evaluation of Cyclosporine-A Inserts Prepared Using Hydroxypropyl Methylcellulose for Treating Dry Eye Disease
Zahraa H. F. Al-Saedi et al.
JOURNAL OF OCULAR PHARMACOLOGY AND THERAPEUTICS (2016)
Stability and Ocular Pharmacokinetics of Celecoxib-Loaded Nanoparticles Topical Ophthalmic Formulations
Mohammed Mostafa Ibrahim et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2016)
Experimentally probing the libration of interfacial water: the rotational potential of water is stiffer at the air/water interface than in bulk liquid
Yujin Tong et al.
PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2016)
Review: The Lacrimal Gland and Its Role in Dry Eye
Christopher D. Conrady et al.
JOURNAL OF OPHTHALMOLOGY (2016)
Hydroxypropylmethyl cellulose films crosslinked with citric acid for control release of nicotine
Pedro L. Marani et al.
CELLULOSE (2015)
Miscibility of Itraconazole-Hydroxypropyl Methylcellulose Blends: Insights with High Resolution Analytical Methodologies
Hitesh S. Purohit et al.
MOLECULAR PHARMACEUTICS (2015)
Chick chorioallantoic membrane model for in ovo evaluation of timolol maleate-brimonidine tartrate ocular inserts
Vinod Kombath Ravindran et al.
DRUG DELIVERY (2014)
The influence of hydroxypropyl methylcellulose (HPMC) molecular weight, concentration and effect of food on in vivo erosion behavior of HPMC matrix tablets
Arun Kumar Jain et al.
JOURNAL OF CONTROLLED RELEASE (2014)
Advances in ophthalmic drug delivery
Peter W. J. Morrison et al.
THERAPEUTIC DELIVERY (2014)
Hydroxypropyl methylcellulose substituent analysis and rheological properties
Hannah Akinosho et al.
CARBOHYDRATE POLYMERS (2013)
The influence of agitation sequence and ionic strength on in vitro drug release from hypromellose (E4M and K4M) ER matrices-The use of the USP III apparatus
Kofi Asare-Addo et al.
COLLOIDS AND SURFACES B-BIOINTERFACES (2013)
Hydroxypropylmethylcellulose films for the ophthalmic delivery of diclofenac sodium
Salah El-Sousi et al.
JOURNAL OF PHARMACY AND PHARMACOLOGY (2013)
A clinical comparison between DisCoVisc and 2% hydroxypropylmethylcellulose in phacoemulsification: a fellow eye study
Rodrigo F. Espindola et al.
CLINICS (2012)
Ocular drug delivery system: a reference to natural polymers
Priyanka Pahuja et al.
EXPERT OPINION ON DRUG DELIVERY (2012)
Liposomes for intravitreal drug delivery: A state of the art
Amelie Bochot et al.
JOURNAL OF CONTROLLED RELEASE (2012)
Shear-thinning hydrogels for biomedical applications
Murat Guvendiren et al.
SOFT MATTER (2012)
Novel low-molecular-weight hypromellose polymeric films for aqueous film coating applications
Hollie F. Bruce et al.
DRUG DEVELOPMENT AND INDUSTRIAL PHARMACY (2011)
Hydroxypropylmethylcellulose at the oil-water interface. Part II. Submicron-emulsions as affected by pH
Nerina A. Camino et al.
FOOD HYDROCOLLOIDS (2011)
Design and evaluation of baicalin-containing in situ pH-triggered gelling system for sustained ophthalmic drug delivery
Haoyun Wu et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2011)
Mathematical modeling of polymer erosion: Consequences for drug delivery
Chelsea K. Sackett et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2011)
Characterization of hydroxypropylmethylcellulose (HPMC) using comprehensive two-dimensional liquid chromatography
Andreas Greiderer et al.
JOURNAL OF CHROMATOGRAPHY A (2011)
Critical factors in the release of drugs from sustained release hydrophilic matrices
Cristina Maderuelo et al.
JOURNAL OF CONTROLLED RELEASE (2011)
Sol-Gel Behavior of Hydroxypropyl Methylcellulose (HPMC) in Ionic Media Including Drug Release
Sunil C. Joshi
MATERIALS (2011)
Cyclodextrin solubilization of carbonic anhydrase inhibitor drugs: Formulation of dorzolamide eye drop microparticle suspension
Phatsawee Jansook et al.
EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2010)
Influence of polymer-surfactant interactions on o/w emulsion properties and microcapsule formation
Lidija B. Petrovic et al.
JOURNAL OF COLLOID AND INTERFACE SCIENCE (2010)
Ophthalmic viscosurgical devices
Hiroko Bissen-Miyajima
CURRENT OPINION IN OPHTHALMOLOGY (2008)
Safety assessment of hydroxypropyl methylcellulose as a food ingredient
George A. Burdock
FOOD AND CHEMICAL TOXICOLOGY (2007)
Studies on biopolymers for ophthalmic drug delivery
Siddaramaiah et al.
JOURNAL OF MACROMOLECULAR SCIENCE PART A-PURE AND APPLIED CHEMISTRY (2007)
Hydroxyl radical scavenging activity of a new ophthalmic viscosurgical device
Francesco Maugeri et al.
CURRENT EYE RESEARCH (2007)
Challenges and obstacles of ocular pharmacokinetics and drug delivery
Arto Urtti
ADVANCED DRUG DELIVERY REVIEWS (2006)
Surface free energy analysis of poly(HEMA)poly(perfluoroacrylate) copolymer networks
Mehmet S. Eroglu
JOURNAL OF APPLIED POLYMER SCIENCE (2006)
Comparison of the effect of sodium hyaluronate (Ophthalin®) and hydroxypropylmethylcellulose (HPMC-Ophtal®) on corneal endothelium, central corneal thickness, and intraocular pressure after phacoemulsification
N. Ray-Chaudhuri et al.
EUROPEAN JOURNAL OF OPHTHALMOLOGY (2006)
Corneal endothelial cells' protection against thermal injury: Influence of ophthalmic viscoelastic substances in experimental study on rabbits
P Jurowski et al.
EUROPEAN JOURNAL OF OPHTHALMOLOGY (2005)
Modeling of drug release from delivery systems based on hydroxypropyl methylcellulose (HPMC)
J Siepmann et al.
ADVANCED DRUG DELIVERY REVIEWS (2001)
分享论文
