相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Rheological parameters and building time of 3D printing sulphoaluminate cement paste modified by retarder and diatomite
Mingxu Chen et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Influence of silica fume on the setting time and mechanical properties of a new magnesium phosphate cement
Xiaoying Xu et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Rheological parameters, thixotropy and creep of 3D-printed calcium sulfoaluminate cement composites modified by bentonite
Mingxu Chen et al.
COMPOSITES PART B-ENGINEERING (2020)
Mixture Design Approach to optimize the rheological properties of the material used in 3D cementitious material printing
Zhixin Liu et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Rheological and harden properties of the high-thixotropy 3D printing concrete
Yu Zhang et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Hardened properties of 3D printed concrete: The influence of process parameters on interlayer adhesion
R. J. M. Wolfs et al.
CEMENT AND CONCRETE RESEARCH (2019)
A systematical review of 3D printable cementitious materials
Bing Lu et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Investigating and optimizing the mix proportion of sustainable phosphate-based rapid repairing material
Feng Lei et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
A comprehensive study of basalt fiber reinforced magnesium phosphate cement incorporating ultrafine fly ash
Muhammad Riaz Ahmad et al.
COMPOSITES PART B-ENGINEERING (2019)
Research progresses on magnesium phosphate cement: A review
M. Aminul Haque et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Design of 3D printable concrete based on the relationship between flowability of cement paste and optimum aggregate content
Chao Zhang et al.
CEMENT & CONCRETE COMPOSITES (2019)
Extrusion and rheology characterization of geopolymer nanocomposites used in 3D printing
Biranchi Panda et al.
COMPOSITES PART B-ENGINEERING (2019)
Feasibility study on sustainable magnesium potassium phosphate cement paste for 3D printing
Yiwei Weng et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Fresh and hardened properties of 3D printable cementitious materials for building and construction
Suvash Chandra Paul et al.
ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING (2018)
Investigation on early hydration features of magnesium potassium phosphate cementitious material with the electrodeless resistivity method
Shuxian Hong et al.
CEMENT & CONCRETE COMPOSITES (2018)
3D printing using concrete extrusion: A roadmap for research
R. A. Buswell et al.
CEMENT AND CONCRETE RESEARCH (2018)
The study of the structure rebuilding and yield stress of 3D printing geopolymer pastes
Da-Wang Zhang et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Vision of 3D printing with concrete - Technical, economic and environmental potentials
Geert De Schutter et al.
CEMENT AND CONCRETE RESEARCH (2018)
Empirical models to predict rheological properties of fiber reinforced cementitious composites for 3D printing
Yiwei Weng et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Use of calcium sulfoaluminate cements for setting control of 3D-printing mortars
Noura Khalil et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Influence of fly ash on compressive strength and micro-characteristics of magnesium potassium phosphate cement mortars
Biwan Xu et al.
CEMENT AND CONCRETE RESEARCH (2017)
Tests on magnesium potassium phosphate composite mortars with different water-to-binder ratios and molar ratios of magnesium-to phosphate
Kyung-Ho Lee et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
On the influence of Mg/P ratio on the properties and durability of magnesium potassium phosphate cement pastes
Mathieu Le Rouzic et al.
CEMENT AND CONCRETE RESEARCH (2017)
Graphene Oxide-Based Electrode Inks for 3D-Printed Lithium-Ion Batteries
Kun Fu et al.
ADVANCED MATERIALS (2016)
Investigation of magnesium phosphate cement hydration in diluted suspension and its retardation by boric acid
Hugo Lahalle et al.
CEMENT AND CONCRETE RESEARCH (2016)
Surface roughness effects on the reinforcement of cement mortars through 3D printed metallic fibers
Ilenia Farina et al.
COMPOSITES PART B-ENGINEERING (2016)
Effects of graphene oxide on the properties and microstructures of the magnesium potassium phosphate cement paste
Zeyu Lu et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
Characterisation of magnesium potassium phosphate cements blended with fly ash and ground granulated blast furnace slag
Laura J. Gardner et al.
CEMENT AND CONCRETE RESEARCH (2015)
Laboratory evaluation of magnesium phosphate cement paste and mortar for rapid repair of cement concrete pavement
Jiusu Li et al.
CONSTRUCTION AND BUILDING MATERIALS (2014)
Dehydration characteristics of struvite-K pertaining to magnesium potassium phosphate cement system in non-isothermal condition
Siyu Zhang et al.
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2013)
Growth and characterization of Struvite-K crystals
C. K. Chauhan et al.
CRYSTAL RESEARCH AND TECHNOLOGY (2011)
Rheological properties of cementitious materials containing mineral admixtures
CK Park et al.
CEMENT AND CONCRETE RESEARCH (2005)
The effect of retarders on the microstructure and mechanical properties of magnesia-phosphate cement mortar
DA Hall et al.
CEMENT AND CONCRETE RESEARCH (2001)
分享论文
