相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Application of three self-developed ECT sensors for monitoring the moisture content in sand and mortar
Wentao Wang et al.
CONSTRUCTION AND BUILDING MATERIALS (2021)
Mechanical performances and microstructures of metakaolin contained UHPC matrix under steam curing conditions
Zongyun Mo et al.
CONSTRUCTION AND BUILDING MATERIALS (2021)
Utilization of barium slag to improve chloride-binding ability of cement-based material
Pian Chen et al.
JOURNAL OF CLEANER PRODUCTION (2021)
Effect of C-S-Hs-PCE and sodium sulfate on the hydration kinetics and mechanical properties of cement paste
Haoxin Li et al.
CONSTRUCTION AND BUILDING MATERIALS (2021)
Low carbon cementitious materials: Sodium sulfate activated ultrafine slag/fly ash blends at ambient temperature
Junjie Zhang et al.
JOURNAL OF CLEANER PRODUCTION (2021)
Effect of carbonation curing on sulfate resistance of cement-coal gangue paste
Ling Qin et al.
JOURNAL OF CLEANER PRODUCTION (2021)
Action of the combined presence of C-S-Hs-PCE and triethanolamine on the performances of cement paste/mortar
Chao Xu et al.
CONSTRUCTION AND BUILDING MATERIALS (2021)
Effect of chloride attack on the bonded concrete system repaired by UHPC
Qing Chen et al.
CONSTRUCTION AND BUILDING MATERIALS (2021)
Influence of low curing temperatures on the tensile response of low clinker strain hardening UHPFRC under full restraint
Mohamed Abdul Hafiz et al.
CEMENT AND CONCRETE RESEARCH (2020)
Performance and ITZ of pervious concrete modified by vinyl acetate and ethylene copolymer dispersible powder
Xiaojie Yang et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Application of Ag/AgCl Sensor for Chloride Monitoring of Mortar under Dry-Wet Cycles
Yupeng Tian et al.
SENSORS (2020)
Influences of EVA and methylcellulose on mechanical properties of Portland cement-calcium aluminate cement-gypsum ternary repair mortar
Chen Shi et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Multiscale investigation on tensile properties of ultra-high performance concrete with silane coupling agent modified steel fibers
Tiejun Liu et al.
CEMENT & CONCRETE COMPOSITES (2020)
A chemo-transport-damage model for concrete under external sulfate attack
Shanshan Qin et al.
CEMENT AND CONCRETE RESEARCH (2020)
New insights into the early reaction of NaOH-activated slag in the presence of CaSO4
Dengquan Wang et al.
COMPOSITES PART B-ENGINEERING (2020)
Effect of TIPA on mechanical properties and hydration properties of cement-lithium slag system
Ting Zhang et al.
JOURNAL OF ENVIRONMENTAL MANAGEMENT (2020)
Influence of exposure environments and moisture content on water repellency of surface impregnation of cement-based materials
Jiuwen Bao et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
Improvements in setting behavior and strengths of cement paste/mortar with EVA redispersible powder using C-S-Hs-PCE
Haoxin Li et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Influence of water re-curing on microstructure of heat-damaged cement mortar characterized by low-field NMR and MIP
Shanbin Xue et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Effect of particle size and curing temperature on mechanical and microstructural properties of waste glass-slag-based and waste glass-fly ash-based geopolymers
Yiyuan Zhang et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Hydration kinetics of cement-quicklime system at different temperatures
Hui Zhang et al.
THERMOCHIMICA ACTA (2019)
Effect of curing temperature on the synthesis, structure and mechanical properties of phosphate-based geopolymers
M. Zribi et al.
JOURNAL OF NON-CRYSTALLINE SOLIDS (2019)
Free and restrained plastic shrinkage of cementitious materials made of engineered kraft pulp fibres
Emad Booya et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Strength enhancement of recycled aggregate pervious concrete using a cement paste redistribution method
Tiejun Liu et al.
CEMENT AND CONCRETE RESEARCH (2019)
Mechanical Degradation and Thermal Decomposition of Ethylene-Vinyl Acetate (EVA) Polymer-Modified Cement Mortar (PCM) Exposed to High-Temperature
Hyung-Jun Kim et al.
SUSTAINABILITY (2019)
Effect of curing temperature and relative humidity on early age and hardened properties of SCC
Gonzalo Barluenga et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
The fresh properties of nano silica incorporating polymer-modified cement pastes
Niloufar Zabihi et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Influence of matrix and pore system characteristics on the durability of pervious concrete
Rui Zhong et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Influences of ethylene-vinyl acetate and methylcellulose on the properties of calcium sulfoaluminate cement
Chen Shi et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Influence of internal curing on the pore size distribution of high strength concrete
Joo Hyung Kim et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Effect of the Adsorbing Behavior of Phosphate Retarders on Hydration of Cement Paste
Hongbo Tan et al.
JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2017)
Influence of curing temperature dependent microstructure on early-age concrete strength development
Ch. Pichler et al.
CEMENT AND CONCRETE RESEARCH (2017)
The soundness of steel slag with different free CaO and MgO contents
Qiang Wang et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
The use of zeolite, lightweight aggregate and boiler slag in restoration renders
Danuta Barnat-Hunek et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Mechanical properties of high porosity cement-based foam materials modified by EVA
Guochen Sang et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
Polymer-modified pervious concrete for durable and sustainable transportation infrastructures
F. Giustozzi
CONSTRUCTION AND BUILDING MATERIALS (2016)
Effect of curing temperature on creep behavior of fly ash concrete
Qingxin Zhao et al.
CONSTRUCTION AND BUILDING MATERIALS (2015)
Properties of ceramic tile adhesives modified by different viscosity hydroxypropyl methylcellulose
Pawel Pichniarczyk et al.
CONSTRUCTION AND BUILDING MATERIALS (2015)
Supplementary cementitious materials: Strength development of self-compacting concrete under different curing temperature
Gidion Turuallo et al.
CIVIL ENGINEERING INNOVATION FOR A SUSTAINABLE (2015)
Influence of vinyl acetate/ethylene copolymer powder on secondary efflorescence in Portland cement-based decorative mortar
Hui-mei Zhu et al.
JOURNAL OF ZHEJIANG UNIVERSITY-SCIENCE A (2015)
Effect of curing temperature on geopolymerization of metakaolin-based geopolymers
Mo Bing-hui et al.
APPLIED CLAY SCIENCE (2014)
Strength, fracture and fatigue of pervious concrete
Yu Chen et al.
CONSTRUCTION AND BUILDING MATERIALS (2013)
Influence of polymer type on adhesion performance of a blended cement mortar
Joshua V. Brien et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2013)
Effect of EVA on the fresh properties of cement paste
A. M. Betioli et al.
CEMENT & CONCRETE COMPOSITES (2012)
Mechanical behaviour of polymer-modified ferrocement under different exposure conditions: An experimental study
Mahyuddin Ramli et al.
COMPOSITES PART B-ENGINEERING (2012)
Mechanical properties of pervious cement concrete
Chen Yu et al.
JOURNAL OF CENTRAL SOUTH UNIVERSITY (2012)
Action of redispersible vinyl acetate and versatate copolymer powder in cement mortar
Ru Wang et al.
CONSTRUCTION AND BUILDING MATERIALS (2011)
Laboratory evaluation of permeability and strength of polymer-modified pervious concrete
Baoshan Huang et al.
CONSTRUCTION AND BUILDING MATERIALS (2010)
Hydration kinetics modeling of Portland cement considering the effects of curing temperature and applied pressure
Feng Lin et al.
CEMENT AND CONCRETE RESEARCH (2009)
The effect of curing temperature on white cement hydration
S. Martinez-Ramirez et al.
CONSTRUCTION AND BUILDING MATERIALS (2009)
Influence of EVA and acrylate polymers on some mechanical properties of cementitious repair mortars
M. H. F. Medeiros et al.
CONSTRUCTION AND BUILDING MATERIALS (2009)
Chemical interaction between EVA and Portland cement hydration at early-age
A. M. Betioli et al.
CONSTRUCTION AND BUILDING MATERIALS (2009)
The effect of curing temperature on sulphate-resistant cement hydration and strength
I. Elkhadiri et al.
CONSTRUCTION AND BUILDING MATERIALS (2008)
Properties of polymer-modified mortars using epoxy and acrylic emulsions
L. K. Aggarwal et al.
CONSTRUCTION AND BUILDING MATERIALS (2007)
Properties of latex blends and its modified cement mortars
SY Zhong et al.
CEMENT AND CONCRETE RESEARCH (2002)
Evidences of chemical interaction between EVA and hydrating Portland cement
DA Silva et al.
CEMENT AND CONCRETE RESEARCH (2002)
Long-term performance of redispersible powders in mortars
J Schulze et al.
CEMENT AND CONCRETE RESEARCH (2001)
分享论文
