相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Impact Performance of Steel Fiber-Reinforced Self-Compacting Concrete against Repeated Drop Weight Impact
Sallal R. Abid et al.
CRYSTALS (2021)
Impact response of novel layered two stage fibrous composite slabs with different support type
R. Rithanyaa et al.
STRUCTURES (2021)
Functionally graded ultra-high performance cementitious composite with enhanced impact properties
P. P. Li et al.
COMPOSITES PART B-ENGINEERING (2020)
Influence of content and maximum size of light expanded clay aggregate on the fresh, strength, and durability properties of self-compacting lightweight concrete reinforced with micro steel fibers
Ali H. Nahhab et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
The effect of compatibility and dimensionality of carbon nanofillers on cement composites
Amr Alatawna et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Experimental and analytical study on uniaxial compressive fatigue behavior of self-compacting rubber lightweight aggregate concrete
Jing Lv et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Impact fatigue behaviour of GFRP mesh reinforced engineered cementitious composites for runway pavement
Yang Pan et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Multi-layered two stage fibrous composites against low-velocity falling mass and projectile impact
T. Abirami et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Evaluation of efficiency factor of a self-compacting lightweight concrete with rubber and expanded clay contents
Andressa F. Angelin et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
被撤回的出版物: Performance evaluation of novel prepacked aggregate concrete reinforced with waste polypropylene fibers at elevated temperatures (Retracted article. See vol. 380, 2023)
Hossein Mohammadhosseini et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Effect of carbon nanotubes on compressive, flexural and tensile strengths of Portland cement-based materials: A systematic literature review
Laura Silvestro et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Impact response of two-layered grouted aggregate fibrous concrete composite under falling mass impact
M. K. Haridharan et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Impact performance of novel multi-layered prepacked aggregate fibrous composites under compression and bending
G. Murali et al.
STRUCTURES (2020)
Experimental Tests and Reliability Analysis of the Cracking Impact Resistance of UHPFRC
Hussain A. Jabir et al.
FIBERS (2020)
Repeated drop-weight impact tests on self-compacting concrete reinforced with micro-steel fiber
Sallal R. Abid et al.
HELIYON (2020)
A feasibility of enhancing the impact resistance of hybrid fibrous geopolymer composites: Experiments and modelling
Neha P. Asrani et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Experimental study on fatigue properties of normal and rubberized self-compacting concrete under bending
Xudong Chen et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Development of a novel low carbon cementitious two stage layered fibrous concrete with superior impact strength
V. R. Ramkumar et al.
JOURNAL OF BUILDING ENGINEERING (2019)
Experimental research on impact response of novel steel fibrous concretes under falling mass impact
T. Abirami et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Eco-Efficient Fiber-Reinforced Preplaced Recycled Aggregate Concrete under Impact Loading
Saud Alfayez et al.
INFRASTRUCTURES (2019)
Using textile reinforced mortar modified with carbon nano tubes to improve flexural performance of RC beams
Mohammad R. Irshidat et al.
COMPOSITE STRUCTURES (2018)
Lightweight expanded clay aggregate as a building material - An overview
Alaa M. Rashad
CONSTRUCTION AND BUILDING MATERIALS (2018)
Durability of multi-walled carbon nanotube reinforced concrete
A. Carrico et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
A feasibility of enhancing the impact strength of novel layered two stage fibrous concrete slabs
G. Murali et al.
ENGINEERING STRUCTURES (2018)
Hybrid-fiber reinforced engineered cementitious composite under tensile and impact loading
M. A. E. M. Ali et al.
MATERIALS & DESIGN (2017)
Effect of carbon nanotubes (CNTs) on the properties of traditional cementitious materials
Alaa M. Rashad
CONSTRUCTION AND BUILDING MATERIALS (2017)
Novel steel fibre-reinforced preplaced aggregate concrete with superior mechanical performance
Moncef L. Nehdi et al.
CEMENT & CONCRETE COMPOSITES (2017)
Carbon nanotube reinforced cementitious composites: An overview
K. M. Liew et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)
Fresh and hardened-state properties of self-compacting lightweight concrete reinforced with steel fibers
Thiago Melo Grabois et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
Effect of sand, fly ash and limestone powder on preplaced aggregate concrete mechanical properties and reinforced beam shear capacity
Michael Coo et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
Non-steady-state accelerated chloride penetration resistance of structural lightweight aggregate concrete
J. Alexandre Bogas et al.
CEMENT & CONCRETE COMPOSITES (2015)
Microstructure and mechanical properties of carbon nanotube reinforced cementitious composites developed using a novel dispersion technique
Shama Parveen et al.
CEMENT AND CONCRETE RESEARCH (2015)
Mechanical and durability properties of high-strength concrete containing steel and polypropylene fibers
Vahid Afroughsabet et al.
CONSTRUCTION AND BUILDING MATERIALS (2015)
The relation between particle density and static elastic moduli of lightweight expanded clay aggregates
Alireza Ardakani et al.
APPLIED CLAY SCIENCE (2014)
Mechanical Properties of Structural Lightweight Aggregate Concrete Containing Low Volume Steel Fiber
Mahmoud Hassanpour et al.
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING (2014)
Critical overview of two-stage concrete: Properties and applications
M. F. Najjar et al.
CONSTRUCTION AND BUILDING MATERIALS (2014)
Long-term behaviour of concrete produced with recycled lightweight expanded clay aggregate concrete
J. Alexandre Bogas et al.
CONSTRUCTION AND BUILDING MATERIALS (2014)
An initial trial mixture proportioning procedure for structural lightweight aggregate concrete
Keun-Hyeok Yang et al.
CONSTRUCTION AND BUILDING MATERIALS (2014)
A comprehensive overview about the effect of nano-SiO2 on some properties of traditional cementitious materials and alkali-activated fly ash
Alaa M. Rashad
CONSTRUCTION AND BUILDING MATERIALS (2014)
Effects of ZnO2, ZrO2, Cu2O3, CuO, CaCO3, SF, FA, cement and geothermal silica waste nanoparticles on properties of cementitious materials - A short guide for Civil Engineer
Alaa M. Rashad
CONSTRUCTION AND BUILDING MATERIALS (2013)
Multifunctional properties of carbon nanotube/fly ash geopolymeric nanocomposites
Mohamed Saafi et al.
CONSTRUCTION AND BUILDING MATERIALS (2013)
A synopsis about the effect of nano-Al2O3, nano-Fe2O3, nano-Fe3O4 and nano-clay on some properties of cementitious materials - A short guide for Civil Engineer
Alaa M. Rashad
MATERIALS & DESIGN (2013)
Examination of effective parameters for the production of expanded clay aggregate
A. Ozguven et al.
CEMENT & CONCRETE COMPOSITES (2012)
Statistical and experimental analysis on the behavior of fiber reinforced concretes subjected to drop weight test
Tara Rahmani et al.
CONSTRUCTION AND BUILDING MATERIALS (2012)
On the aspect ratio effect of multi-walled carbon nanotube reinforcements on the mechanical properties of cementitious nanocomposites
Rashid K. Abu Al-Rub et al.
CONSTRUCTION AND BUILDING MATERIALS (2012)
Performance comparison of six numerical methods in estimating Weibull parameters for wind energy application
Tian Pau Chang
APPLIED ENERGY (2011)
Behavior of multi-walled carbon nanotubes on the porosity and microstructure of cement-based materials
Thanongsak Nochaiya et al.
APPLIED SURFACE SCIENCE (2011)
Combined effect of steel fibres and steel rebars on impact resistance of high performance concrete
Chen Xiang-yu et al.
JOURNAL OF CENTRAL SOUTH UNIVERSITY OF TECHNOLOGY (2011)
Flexural capacity of one-way GFRP concrete slabs
Ehab M. Lotfy et al.
PROCEEDINGS OF THE INSTITUTION OF CIVIL ENGINEERS-CONSTRUCTION MATERIALS (2011)
Statistical variations in impact resistance of polypropylene fibre-reinforced concrete
A Badr et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2006)
Mechanical behavior and microstructure of cement composites incorporating surface-treated multi-walled carbon nanotubes
GY Li et al.
CARBON (2005)
Assessment of statistical variations in impact resistance of high-strength concrete and high-strength steel fiber-reinforced concrete
PS Song et al.
CEMENT AND CONCRETE RESEARCH (2005)
Statistical analysis of impact strength and strength reliability of steel-polypropylene hybrid fiber-reinforced concrete
PS Song et al.
CONSTRUCTION AND BUILDING MATERIALS (2005)
Carbon nanotubes by a CVD method. Part I: Synthesis and characterization of the (Mg, Fe)O catalysts
P Coquay et al.
JOURNAL OF PHYSICAL CHEMISTRY B (2002)
Mechanical properties of steel fibre reinforced lightweight concrete with pumice stone or expanded clay aggregates
G Campione et al.
MATERIALS AND STRUCTURES (2001)
分享论文
