相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Aging of lime-based TRM composites under natural environmental conditions
Ali Dalalbashi et al.
CONSTRUCTION AND BUILDING MATERIALS (2021)
Tensile Behavior of a Glass FRCM System after Different Environmental Exposures
Jacopo Donnini et al.
PROCESSES (2020)
Bond Behavior of FRCM Composites Applied on Concrete and Masonry
A. Bellini et al.
PROCEEDINGS OF ITALIAN CONCRETE DAYS 2018 (2020)
Experimental and numerical evaluation of fiber-matrix interface behaviour of different FRCM systems
Alessandro Bellini et al.
COMPOSITES PART B-ENGINEERING (2019)
Destructive and minor destructive tests on masonry buildings: Experimental results and comparison between shear failure criteria
Francesca Ferretti et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Masonry columns strengthened with FRCM system: Numerical and experimental evaluation
F. S. Murgo et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Cyclic bond behavior of FRCM composites applied on masonry substrate
Alessandro Bellini et al.
COMPOSITES PART B-ENGINEERING (2019)
Shear capacity of masonry panels repaired with composite materials: Experimental and analytical investigations
Valerio Alecci et al.
COMPOSITES PART B-ENGINEERING (2019)
Analysis of FRCM and CRM parameters for the in-plane shear strengthening of different URM types
Marta Del Zoppo et al.
COMPOSITES PART B-ENGINEERING (2019)
Experimental In-Plane Shear Capacity of Clay Brick Masonry Panels Strengthened with FRCM and FRM Composites
Marta Del Zoppo et al.
JOURNAL OF COMPOSITES FOR CONSTRUCTION (2019)
Diagonal shear behavior of historic walls strengthened with composite reinforced mortar (CRM)
Tommaso D'Antino et al.
MATERIALS AND STRUCTURES (2019)
Effectiveness of FRCM Reinforcement Applied to Masonry Walls Subject to Axial Force and Out-Of-Plane Loads Evaluated by Experimental and Numerical Studies
Alessandro Bellini et al.
INTERNATIONAL JOURNAL OF ARCHITECTURAL HERITAGE (2018)
The role of mortar joints in FRP debonding from masonry
Enrico Sassoni et al.
COMPOSITES PART B-ENGINEERING (2018)
Experimental characterization of in-plane behaviour of old masonry walls strengthened through the addition of CFRP reinforced render
Joao Guerreiro et al.
COMPOSITES PART B-ENGINEERING (2018)
Recommendation of RILEM Technical Committee 250-CSM: Test method for Textile Reinforced Mortar to substrate bond characterization
Gianmarco de Felice et al.
MATERIALS AND STRUCTURES (2018)
New Italian guidelines for design of externally bonded Fabric-Reinforced Cementitious Matrix (FRCM) systems for repair and strengthening of masonry and concrete structures
Luigi Ascione et al.
XIV INTERNATIONAL CONFERENCE ON BUILDING PATHOLOGY AND CONSTRUCTIONS REPAIR (2018)
Experimental investigation of tensile and bond properties of Carbon-FRCM composites for strengthening masonry elements
Francesca Giulia Carozzi et al.
COMPOSITES PART B-ENGINEERING (2017)
Glass fabric reinforced cementitious matrix: Tensile properties and bond performance on masonry substrate
Marianovella Leone et al.
COMPOSITES PART B-ENGINEERING (2017)
Performance assessment of basalt FRCM for retrofit applications on masonry
Gian Piero Lignola et al.
COMPOSITES PART B-ENGINEERING (2017)
Experimental analysis on tensile and bond properties of PBO and aramid fabric reinforced cementitious matrix for strengthening masonry structures
Carmelo Caggegi et al.
COMPOSITES PART B-ENGINEERING (2017)
Round Robin Test on tensile and bond behaviour of Steel Reinforced Grout systems
Stefano De Santis et al.
COMPOSITES PART B-ENGINEERING (2017)
Experimental tests on FRCM strengthening systems for tuff masonry elements
Antonio Bilotta et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Experimental investigation of tuff masonry panels reinforced with surface bonded basalt textile-reinforced mortar
Giancarlo Marcari et al.
COMPOSITES PART B-ENGINEERING (2017)
Experimental characterization of composite-to-brick masonry shear bond
Gianmarco de Felice et al.
MATERIALS AND STRUCTURES (2016)
Irregular stone masonries: Analysis and strengthening with glass fibre reinforced composites
L. Feo et al.
COMPOSITES PART B-ENGINEERING (2016)
Experimental and analytical study to evaluate the effectiveness of an in-plane reinforcement for masonry walls using GFRP meshes
Natalino Gattesco et al.
CONSTRUCTION AND BUILDING MATERIALS (2015)
Performance of masonry buildings during the Emilia 2012 earthquake
Andrea Penna et al.
BULLETIN OF EARTHQUAKE ENGINEERING (2014)
URM Walls Strengthened with Fabric-Reinforced Cementitious Matrix Composite Subjected to Diagonal Compression
Saman Babaeidarabad et al.
JOURNAL OF COMPOSITES FOR CONSTRUCTION (2014)
Analytical and numerical modeling of composite-to-brick bond
F. Ceroni et al.
MATERIALS AND STRUCTURES (2014)
In-plane behaviour of tuff masonry strengthened with inorganic matrix-grid composites
Fulvio Parisi et al.
COMPOSITES PART B-ENGINEERING (2013)
Seismic Damage Assessment of Unreinforced Masonry Structures After The Abruzzo 2009 Earthquake: The Case Study of the Historical Centers of L'Aquila and Castelvecchio Subequo
Maurizio Indirli et al.
INTERNATIONAL JOURNAL OF ARCHITECTURAL HERITAGE (2013)
Round Robin Test for composite-to-brick shear bond characterization
Maria Rosa Valluzzi et al.
MATERIALS AND STRUCTURES (2012)
Shear capacity assessment of tuff panels strengthened with FRP diagonal layout
Giancarlo Marcari et al.
COMPOSITES PART B-ENGINEERING (2011)
Externally bonded grids as strengthening and seismic retrofitting materials of masonry panels
Catherine Papanicolaou et al.
CONSTRUCTION AND BUILDING MATERIALS (2011)
A numerical insight into the response of masonry reinforced by FRP strips. The case of perfect adhesion
Roberto Fedele et al.
COMPOSITE STRUCTURES (2010)
The use of the diagonal compression test to identify the shear mechanical parameters of masonry
Chiara Calderini et al.
CONSTRUCTION AND BUILDING MATERIALS (2010)
Shear capacity of masonry walls externally strengthened by a cement-based composite material: An experimental campaign
Ciro Faella et al.
CONSTRUCTION AND BUILDING MATERIALS (2010)
Structural performance of the historic and modern buildings of the University of L'Aquila during the seismic events of April 2009
A. M. Ceci et al.
ENGINEERING STRUCTURES (2010)
Processing Italian damage data to derive typological fragility curves
M. Rota et al.
SOIL DYNAMICS AND EARTHQUAKE ENGINEERING (2008)
Textile reinforced mortar (TRM) versus FRP as strengthening material of URM walls: out-of-plane cyclic loading
Catherine G. Papanicolaou et al.
MATERIALS AND STRUCTURES (2008)
Textile-reinforced mortar (TRM) versus FRP as strengthening material of URM walls: in-plane cyclic loading
Catherine G. Papanicolaou et al.
MATERIALS AND STRUCTURES (2007)
On the vulnerability assessment of monumental buildings
Sergio Lagomarsino
BULLETIN OF EARTHQUAKE ENGINEERING (2006)
The use of fibre reinforced polymers to improve seismic resistance of masonry
NG Shrive
CONSTRUCTION AND BUILDING MATERIALS (2006)
Experimental in-plane behavior of tuff masonry strengthened with cementitious matrix-grid composites
A. Prota et al.
JOURNAL OF COMPOSITES FOR CONSTRUCTION (2006)
Shear behavior of masonry panels strengthened by FRP laminates
MR Valluzzi et al.
CONSTRUCTION AND BUILDING MATERIALS (2002)