相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Measurement of multiple mechanical properties for polymer composites using digital image correlation at elevated temperatures
Ziqing Hao et al.
MATERIALS & DESIGN (2021)
In situ observation of the deformation and fracture of an alumina-alumina ceramic-matrix composite at elevated temperature using x-ray computed tomography
Talha J. Pirzada et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)
Bending fatigue behavior in an advanced SiC/SiC ceramic matrix composite component at elevated temperature in air
Amit Patel et al.
COMPOSITES PART C: OPEN ACCESS (2021)
The effects of preparation temperature on the SiCf/SiC 3D4d woven composite
Xingkeng Shen et al.
CERAMICS INTERNATIONAL (2020)
Investigation on non-uniform strains of a 2.5D woven ceramic matrix composite under in-plane tensile stress
Xuefeng Teng et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2020)
Effect of film cooling holes on the mechanical properties of 3D braided SiCf/SiC composites at 1350 °C in air
X. H. Zhang et al.
CERAMICS INTERNATIONAL (2020)
Crack initiation and propagation in braided SiC/SiC composite tubes: Effect of braiding angle
Yang Chen et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2020)
Reconstruction of meso-structure and numerical simulations of the mechanical behavior of three-dimensional four-directional braided ceramic matrix composites
Xin Jing et al.
CERAMICS INTERNATIONAL (2020)
Volumetric assessment of fatigue damage in a SiCf/SiC ceramic matrix composite via in situ X-ray computed tomography
Zak Quiney et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2020)
In situ observation of compression damage in a 3D needled-punched carbon fiber-silicon carbide ceramic matrix composite
Fan Wan et al.
COMPOSITE STRUCTURES (2019)
Combining in-situ synchrotron X-ray microtomography and acoustic emission to characterize damage evolution in ceramic matrix composites
Emmanuel Maillet et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2019)
Mechanical properties of the SiCf/SiC composites reinforced with KD-I and KD-II fibers fabricated assisted by a microwave heating method
Mingyuan Li et al.
CERAMICS INTERNATIONAL (2019)
A review of third generation SiC fibers and SiCf/SiC composites
Pengren Wang et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)
Acoustic emission and X-ray computed microtomography characterization of damage accumulation in a woven Cf/SiC composite
Yudong Xue et al.
MATERIALS CHARACTERIZATION (2019)
Progressive damage analysis of three-dimensional braided composites under flexural load by micro-CT and acoustic emission
Peng-fei Zhang et al.
COMPOSITE STRUCTURES (2019)
Damage development during flexural loading of a 5-directional braided C/C-SiC composite, characterized by X-ray tomography and digital volume correlation
Fan Wan et al.
CERAMICS INTERNATIONAL (2019)
Analysis of the damage initiation in a SiC/SiC composite tube from a direct comparison between large-scale numerical simulation and synchrotron X-ray micro-computed tomography
Yang Chen et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2019)
Meso-scale progressive damage modeling and life prediction of 3D braided composites under fatigue tension loading
Chao Zhang et al.
COMPOSITE STRUCTURES (2018)
Experimental study of tensile properties and deformation evolutions of 2D and 2.5D woven SiO2f /SiO2 composites using single-camera stereo-digital image correlation
Liping Yu et al.
COMPOSITE STRUCTURES (2018)
Experimental results on the elevated temperature tensile response of SiC/SiC ceramic matrix notched composites
P. Meyer et al.
COMPOSITES PART B-ENGINEERING (2018)
DVC-based image subtraction to detect microcracking in lightweight concrete
C. Chateau et al.
STRAIN (2018)
Quantifying the three-dimensional damage and stress redistribution mechanisms of braided SiC/SiC composites by in situ volumetric digital image correlation
Brendan P. Croom et al.
SCRIPTA MATERIALIA (2017)
In-situ bending behavior and failure characterization of 3D needle-punched C/SiC composites
Yali Dong et al.
MATERIALS TODAY COMMUNICATIONS (2017)
Damage investigation and modeling of 3D woven ceramic matrix composites from X-ray tomography in-situ tensile tests
Vincent Mazars et al.
ACTA MATERIALIA (2017)
Tensile creep behavior of three-dimensional four-step braided SiC/SiC composite at elevated temperature
Xin Jing et al.
CERAMICS INTERNATIONAL (2017)
An experimentally validated computational model for progressive damage analysis of notched oxide/oxide woven ceramic matrix composites
Dianyun Zhang et al.
COMPOSITE STRUCTURES (2017)
Synchrotron X-ray tomographic characterization of CVI engineered 2D-woven and 3D-braided SiCf/SiC composites
Yantao Gao et al.
CERAMICS INTERNATIONAL (2016)
In-situ damage monitoring of a SiC/SiC ceramic matrix composite using acoustic emission and digital image correlation
Travis Whitlow et al.
COMPOSITE STRUCTURES (2016)
Porosity characterization of fiber-reinforced ceramic matrix composite using synchrotron X-ray computed tomography
C. Zou et al.
JOURNAL OF INSTRUMENTATION (2016)
Effect of fiber directionality on the static and dynamic mechanical properties of 3D SiCf/SiC composites
Zhenhua Hou et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Effect of interface type on the static and dynamic mechanical properties of 3D braided SiCf/SiC composites
Zhenhua Hou et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Computational analysis of fatigue behavior of 3D 4-directional braided composites based on unit cell approach
Wenfeng Hao et al.
ADVANCES IN ENGINEERING SOFTWARE (2015)
Fiber strength measurement for KD-I(f)/SiC composites and correlation to tensile mechanical behavior at room and elevated temperatures
Jing Xin et al.
CERAMICS INTERNATIONAL (2015)
Effect of microwave sintering time on the flexural properties of the SiC/SiC composites
Huiyong Yang et al.
CERAMICS INTERNATIONAL (2015)
Characterization of SiC/SiC composites damage mechanisms using Digital Image Correlation at the tow scale
Fabien Bernachy-Barbe et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2015)
Influence of fibre architecture on the tensile, compressive and flexural behaviour of 3D woven composites
S. Dai et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2015)
Mechanical properties and in situ crack growth observation of SiC/SiC composites
Shuang Zhao et al.
CERAMICS INTERNATIONAL (2014)
Current status and recent research achievements in SiC/SiC composites
Y. Katoh et al.
JOURNAL OF NUCLEAR MATERIALS (2014)
Effect of heat treatment on microstructure and mechanical properties of PIP-SiC/SiC composites
Shuang Zhao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Real-time quantitative imaging of failure events in materials under load at temperatures above 1,600 °C
Hrishikesh A. Bale et al.
NATURE MATERIALS (2013)
Nondestructive Evaluation of Microstructure of SiCf/SiC Composites by X-Ray Computed Microtomography
Weon-Ju Kim et al.
JOURNAL OF THE KOREAN CERAMIC SOCIETY (2013)
Preparation of High Performance SiCf/SiC Composites through PIP Process
Mingwei Chen et al.
TESTING AND EVALUATION OF INORGANIC MATERIALS III (2013)
Optimization of Digital Image Correlation for High-Resolution Strain Mapping of Ceramic Composites
V. P. Rajan et al.
EXPERIMENTAL MECHANICS (2012)
Mechanical properties of 3D KD-I SiCf/SiC composites with engineered fibre-matrix interfaces
H. J. Yu et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2011)
Porosity analysis of long-fiber-reinforced ceramic matrix composites using X-ray tomography
A. Morales-Rodriguez et al.
SCRIPTA MATERIALIA (2009)
Influence of pyrolytic carbon interface thickness on microstructure and mechanical properties of SiC/SiC composites by NITE process
Kazuya Shimoda et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2008)
Creep and stress-strain behavior after creep for SiC fiber reinforced, melt-infiltrated SiC matrix composites
GN Morscherz et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2006)
Design, preparation and properties of non-oxide CMCs for application in engines and nuclear reactors: an overview
R Naslain
COMPOSITES SCIENCE AND TECHNOLOGY (2004)