4.7 Article

Effect of the Co3O4 load on the performance of PdO/Co3O4/ZrO2 open cell foam catalysts for the lean combustion of methane: Kinetic and mass transfer regimes

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Chemistry, Applied

On the contribution of oxygen from Co3O4 to the Pd-catalyzed methane combustion

Jing Shen et al.

Summary: The oxygen storage capacity of exhaust gas treatment catalysts is crucial for stabilizing catalytic activity and improving engine performance, particularly at sub-stoichiometric oxygen-to-fuel ratios. Co3O4 catalysts demonstrate insensitivity of methane conversion to oxygen variations, while the Pd/Co3O4 catalyst shows the best performance at temperatures between 400 and 550 degrees Celsius.

CATALYSIS TODAY (2021)

Article Engineering, Environmental

Analysis of heat and mass transfer limitations for the combustion of methane emissions on PdO/Co3O4 coated on ceramic open cell foams

Carmen W. Moncada Quintero et al.

Summary: This study investigated the effect of coated ceramic open cells foams with catalysts on the combustion reaction of methane, revealing the importance of thermal conductivity of OCFs on reaction performance. The best OCF structured catalyst showed good stability, capable of sustaining the combustion reaction effectively.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Engineering, Environmental

Open-cell foams as catalysts support: A systematic analysis of the mass transfer limitations

A. Aguirre et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Article Engineering, Environmental

Kinetic Modelling of Co3O4- and Pd/Co3O4-Catalyzed Wet Lean Methane Combustion

Somaye Nasr et al.

EMISSION CONTROL SCIENCE AND TECHNOLOGY (2020)

Review Chemistry, Applied

Structure-activity relationship in Pd/CeO2 methane oxidation catalysts

Sara Colussi et al.

CHINESE JOURNAL OF CATALYSIS (2020)

Article Engineering, Industrial

Improving the quality of Al-Si castings by using ceramic filters

Ivana Svecova et al.

PRODUCTION ENGINEERING ARCHIVES (2020)

Article Chemistry, Physical

Surface reaction kinetics of methane oxidation over PdO

H. Stotz et al.

JOURNAL OF CATALYSIS (2019)

Article Chemistry, Physical

Cobalt mixed oxides deposited on the SiC open-cell foams for nitrous oxide decomposition

A. Klegova et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2019)

Article Chemistry, Physical

The effect of milling parameters on the mechanochemical synthesis of Pd-CeO2 methane oxidation catalysts

Maila Danielis et al.

CATALYSIS SCIENCE & TECHNOLOGY (2019)

Article Energy & Fuels

A fundamental analysis of the influence of the geometrical properties on the effective thermal conductivity of open-cell foams

Mauro Bracconi et al.

CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2018)

Article Engineering, Environmental

Analysis of Ru/La-Al2O3 catalyst loading on alumina monoliths and controlling regimes in methane steam reforming

M. Arsalan Ashraf et al.

CHEMICAL ENGINEERING JOURNAL (2018)

Review Chemistry, Inorganic & Nuclear

Catalytic Oxidation of Methane: Pd and Beyond

Matteo Monai et al.

EUROPEAN JOURNAL OF INORGANIC CHEMISTRY (2018)

Article Thermodynamics

Additive Manufactured open cell polyhedral structures as substrates for automotive catalysts

V. Papetti et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)

Article Chemistry, Physical

Insights into the effect of catalyst loading on methane steam reforming and controlling regime for metallic catalytic monoliths

M. Arsalan Ashraf et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2018)

Article Thermodynamics

Lattice Boltzmann Simulation of Mass Transfer Coefficients for Chemically Reactive Flows in Porous Media

A. Xu et al.

JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2018)

Article Engineering, Chemical

Catalytic Performance of Pd/Co3O4 on SiC and ZrO2 Open Cell Foams for Process Intensification of Methane Combustion in Lean Conditions

Giuliana Ercolino et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2017)

Review Materials Science, Multidisciplinary

Solution Combustion Synthesis for Preparation of Structured Catalysts: A Mini-Review on Process Intensification for Energy Applications and Pollution Control

S. Specchia et al.

INTERNATIONAL JOURNAL OF SELF-PROPAGATING HIGH-TEMPERATURE SYNTHESIS (2017)

Article Engineering, Environmental

Catalytic combustion of residual methane on alumina monoliths and open cell foams coated with Pd/Co3O4

Giuliana Ercolino et al.

CHEMICAL ENGINEERING JOURNAL (2017)

Article Engineering, Environmental

Generalized correlations for mass transfer and pressure drop in fiber-based catalyst supports

Erik Reichelt et al.

CHEMICAL ENGINEERING JOURNAL (2017)

Article Chemistry, Physical

Optimization of Pd catalysts supported on Co3O4 for low-temperature lean combustion of residual methane

Giuliana Ercolino et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2017)

Article Engineering, Environmental

Open-cell foams as beds in multiphase reactors: Residence time distribution and mass transfer

Sara Voltolina et al.

CHEMICAL ENGINEERING JOURNAL (2017)

Article Computer Science, Interdisciplinary Applications

CFD modeling of catalytic reactions in open-cell foam substrates

A. Della Torre et al.

COMPUTERS & CHEMICAL ENGINEERING (2016)

Review Chemistry, Physical

Commercial Applications of Metal Foams: Their Properties and Production

Francisco Garcia-Moreno

MATERIALS (2016)

Article Engineering, Environmental

Effect of washcoat diffusion resistance in foam based catalytic reactors

Jan von Rickenbach et al.

CHEMICAL ENGINEERING JOURNAL (2015)

Article Engineering, Chemical

Performance of randomized Kelvin cell structures as catalytic substrates: Mass-transfer based analysis

Francesco Lucci et al.

CHEMICAL ENGINEERING SCIENCE (2014)

Article Engineering, Industrial

Additive manufactured porous titanium structures: Through-process quantification of pore and strut networks

Taek Bo Kim et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2014)

Article Biotechnology & Applied Microbiology

Structured catalysts for non-adiabatic applications

Enrico Tronconi et al.

CURRENT OPINION IN CHEMICAL ENGINEERING (2014)

Article Engineering, Environmental

Facing the catalytic combustion of CH4/H2 mixtures into monoliths

Stefania Specchia et al.

CHEMICAL ENGINEERING JOURNAL (2011)

Article Engineering, Chemical

Determining the specific surface area of ceramic foams: The tetrakaidecahedra model revisited

Amer Inayat et al.

CHEMICAL ENGINEERING SCIENCE (2011)

Article Engineering, Chemical

Overall mass transfer coefficients and controlling regimes in catalytic monoliths

Saurabh Y. Joshi et al.

CHEMICAL ENGINEERING SCIENCE (2010)

Review Chemistry, Physical

Catalytic combustion of methane at high temperatures: Cerium effect on PdO/Al2O3 catalysts

Lilian M. T. Simplicio et al.

APPLIED CATALYSIS A-GENERAL (2009)

Article Engineering, Chemical

On the use of internal mass transfer coefficients in modeling of diffusion and reaction in catalytic monoliths

Saurabh Y. Joshi et al.

CHEMICAL ENGINEERING SCIENCE (2009)

Article Engineering, Chemical

Volume image analysis of ceramic sponges

Julia Grosse et al.

CHEMICAL ENGINEERING & TECHNOLOGY (2008)

Article Engineering, Chemical

Mass transfer and pressure drop in ceramic foams: A description for different pore sizes and porosities

G. Incera Garrido et al.

CHEMICAL ENGINEERING SCIENCE (2008)

Article Engineering, Chemical

CO oxidation over structured carriers: A comparison of ceramic foams, honeycombs and beads

Florina Corina Patcas et al.

CHEMICAL ENGINEERING SCIENCE (2007)

Article Engineering, Chemical

Generalized correlation for gas/solid mass-transfer coefficients in metallic and ceramic foams

Gianpiero Groppi et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2007)

Article Agricultural Engineering

X-ray computed tomography image analysis to explain the airflow resistance differences in grain bulks

S. Neethirajan et al.

BIOSYSTEMS ENGINEERING (2006)

Article Engineering, Chemical

Mass-transfer characterization of metallic foams as supports for structured catalysts

L Giani et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2005)

Article Engineering, Chemical

Mass-transfer coefficients in washcoated monoliths

M Bhattacharya et al.

AICHE JOURNAL (2004)

Article Chemistry, Physical

Properties of ceramic foam catalyst supports: mass and heat transfer

JT Richardson et al.

APPLIED CATALYSIS A-GENERAL (2003)

Article Engineering, Chemical

Ceramic foam monoliths as catalyst carriers. 1. Adjustment and description of the morphology

FC Buciuman et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2003)

Article Engineering, Chemical

Shape normalization and analysis of the mass transfer controlled regime in catalytic monoliths

V Balakotaiah et al.

CHEMICAL ENGINEERING SCIENCE (2002)

Article Chemistry, Physical

Contributions of lattice oxygen in methane combustion over PdO-based catalysts

D Ciuparu et al.

JOURNAL OF CATALYSIS (2001)