相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Overcoming the strength-ductility trade-off by tailoring grain-boundary metastable Si-containing phase in β-type titanium alloy
X. Luo et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)
Microstructural homogeneity and mechanical behavior of a selective laser melted Ti-35Nb alloy produced from an elemental powder mixture
Jincheng Wang et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)
Ultra-strong bond interface in additively manufactured iron-based multi-materials
Chaolin Tan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Selective laser melting of Cu-Ni-Sn: A comprehensive study on the microstructure, mechanical properties, and deformation behavior
Chao Zhao et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2021)
A review on high stiffness aluminum-based composites and bimetallics
Sajjad Amirkhanlou et al.
CRITICAL REVIEWS IN SOLID STATE AND MATERIALS SCIENCES (2020)
Microstructure development, tribological property and underlying mechanism of laser additive manufactured submicro-TiB2 reinforced Al-based composites
Lixia Xi et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Cold spray additive manufacturing of metal matrix composites (MMCs) using a novel nano-TiB2-reinforced 7075Al powder
Xinliang Xie et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Comparative study of performance comparison of AlSi10Mg alloy prepared by selective laser melting and casting
Qian Yan et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)
Effect of TiB2 content on microstructural features and hardness of TiB2/AA7075 composites manufactured by LMD
Lei Zhenglong et al.
JOURNAL OF MANUFACTURING PROCESSES (2020)
Grain refinement and localized amorphization of additively manufactured high-entropy alloy matrix composites reinforced by nano ceramic particles via selective-laser-melting/remelting
Bo Li et al.
COMPOSITES COMMUNICATIONS (2020)
Selective laser melting of TiN nanoparticle-reinforced AlSi10Mg composite: Microstructural, interfacial, and mechanical properties
C. Gao et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2020)
Microstructure, metallurgical defects and hardness of Al-Cu-Mg-Li-Zr alloy additively manufactured by selective laser melting
Rong Xu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
A review of particulate-reinforced aluminum matrix composites fabricated by selective laser melting
Pei Wang et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2020)
Influence of heat treatment on microstructure evolution and mechanical properties of TiB2/Al 2024 composites fabricated by directed energy deposition
Bo Chen et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
Cu-Ni-Sn alloy fabricated by melt spinning and selective laser melting: a comparative study on the microstructure and formation kinetics
Chao Zhao et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
Design and additive manufacturing of novel conformal cooling molds
Chaolin Tan et al.
MATERIALS & DESIGN (2020)
Selective laser melting of nano-TiN modified AlSi10Mg composite powder with low laser reflectivity
Chaofeng Gao et al.
MATERIALS LETTERS (2019)
On the role of Zr content into Portevin-Le Chatelier (PLC) effect of selective laser melted high strength Al-Cu-Mg-Mn alloy
Xiaojia Nie et al.
MATERIALS LETTERS (2019)
Laser solid forming additive manufacturing TiB2 reinforced 2024Al composite: Microstructure and mechanical properties
Xiaoli Wen et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Effect of TiB2 particles on microstructure and crystallographic texture of Al-12Si fabricated by selective laser melting
L. Xi et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Effect of nano-TiB2 particles on the anisotropy in an AlSi10Mg alloy processed by selective laser melting
Y. K. Xiao et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
CNT-reinforced AlSi10Mg composite by selective laser melting: microstructural and mechanical properties
Xihe Liu et al.
MATERIALS SCIENCE AND TECHNOLOGY (2019)
AlSi10Mg alloy nanocomposites reinforced with aluminum-coated graphene: Selective laser melting, interfacial microstructure and property analysis
Zhanyong Zhao et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Selective laser melting of Ti-35Nb composite from elemental powder mixture: Microstructure, mechanical behavior and corrosion behavior
J. C. Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Abnormal corrosion behavior of selective laser melted AlSi10Mg alloy induced by heat treatment at 300 °C
Xinhui Gu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Influence of processing parameters on selective laser melted SiCp/AlSi10Mg composites: Densification, microstructure and mechanical properties
Gang Xue et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Ultrahigh-performance TiNi shape memory alloy by 4D printing
H. Z. Lu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
The interfacial structure of Al/Al4C3 in graphene/Al composites prepared by selective laser melting: First-principles and experimental
Z. Y. Zhao et al.
MATERIALS LETTERS (2019)
Selective Laser Melting to Manufacture In Situ Metal Matrix Composites: A Review
Sasan Dadbakhsh et al.
ADVANCED ENGINEERING MATERIALS (2019)
Study of heat treatment parameters for additively manufactured AlSi10Mg in comparison with corresponding cast alloy
Luca Girelli et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Double-slit photoelectron interference in strong-field ionization of the neon dimer
Maksim Kunitski et al.
NATURE COMMUNICATIONS (2019)
Development of WC-Inconel composites using selective laser melting
Q. B. Nguyen et al.
ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING (2018)
Laser additive manufactured WC reinforced Fe-based composites with gradient reinforcement/matrix interface and enhanced performance
Dongdong Gu et al.
COMPOSITE STRUCTURES (2018)
Plastic deformation mechanisms in severely strained eutectic high entropy composites explained via strain rate sensitivity and activation volume
T. Maity et al.
COMPOSITES PART B-ENGINEERING (2018)
Recent developments and opportunities in additive manufacturing of titanium-based matrix composites: A review
Hooyar Attar et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2018)
Influence of severe straining and strain rate on the evolution of dislocation structures during micro-/nanoindentation in high entropy lamellar eutectics
T. Maity et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2018)
Distinction of corrosion resistance of selective laser melted Al-12Si alloy on different planes
Yang Chen et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Gradient in microstructure and mechanical property of selective laser melted AlSi10Mg
Y. J. Liu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
High-strength silicon brass manufactured by selective laser melting
C. Yang et al.
MATERIALS LETTERS (2018)
Densification behavior and mechanical properties of nanocrystalline TiC reinforced 316L stainless steel composite parts fabricated by selective laser melting
Zhao Shuming et al.
OPTICS AND LASER TECHNOLOGY (2018)
Additive manufacturing of metallic components - Process, structure and properties
T. DebRoy et al.
PROGRESS IN MATERIALS SCIENCE (2018)
Melt spreading behavior, microstructure evolution and wear resistance of selective laser melting additive manufactured AlN/AlSi10Mg nanocomposite
Donghua Dai et al.
SURFACE & COATINGS TECHNOLOGY (2018)
Influence of Powder Characteristics on Processability of AlSi12 Alloy Fabricated by Selective Laser Melting
Rustam Baitimerov et al.
MATERIALS (2018)
Improved corrosion behavior of ultrafine-grained eutectic Al-12Si alloy produced by selective laser melting
Yan Yang et al.
MATERIALS & DESIGN (2018)
3D printing of Fe-based bulk metallic glass composites with combined high strength and fracture toughness
Ning Li et al.
MATERIALS & DESIGN (2018)
Development of interfacial stress during selective laser melting of TiC reinforced TiAl composites: Influence of geometric feature of reinforcement
Chenglong Ma et al.
MATERIALS & DESIGN (2018)
Study on design and performance of metal-bonded diamond grinding wheels fabricated by selective laser melting (SLM)
Chenchen Tian et al.
MATERIALS & DESIGN (2018)
In-situ synthesis of aluminum/nano-quasicrystalline Al-Fe-Cr composite by using selective laser melting
N. Kang et al.
COMPOSITES PART B-ENGINEERING (2018)
A novel high-strength Al-based nanocomposite reinforced with Ti-based metallic glass nanoparticles produced by powder metallurgye
W. W. Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Enhancement in mechanical properties of selectively laser-melted AlSi10Mg aluminum alloys by T6-like heat treatment
L. F. Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Preparation and mechanical properties of CNTs-AlSi10Mg composite fabricated via selective laser melting
L. Y. Jiang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Additive Manufacturing of Titanium Alloys by Electron Beam Melting: A Review
Lai-Chang Zhang et al.
ADVANCED ENGINEERING MATERIALS (2018)
Selective laser melting additive manufacturing of in situ Al2Si4O10/Al composites: Microstructural characteristics and mechanical properties
Jiubin Jue et al.
JOURNAL OF COMPOSITE MATERIALS (2017)
Formation of metastable cellular microstructures in selective laser melted alloys
K. G. Prashanth et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Strain rate sensitivity and fracture mechanism of AlSi10Mg parts produced by Selective Laser Melting
I. Rosenthal et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Change in microstructure of selectively laser melted AlSi10Mg alloy with heat treatments
Naoki Takata et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Selective laser melting of advanced Al-Al2O3 nanocomposites: Simulation, microstructure and mechanical properties
Quanquan Han et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
On microstructure and mechanical properties of additively manufactured AlSi10Mg_200C using recycled powder
Hamed Asgari et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
3D printing of high-strength aluminium alloys
John H. Martin et al.
NATURE (2017)
Selective laser melting of TiB2/316L stainless steel composites: The roles of powder preparation and hot isostatic pressing post-treatment
Bandar AlMangour et al.
POWDER TECHNOLOGY (2017)
Microstructure evolution and mechanical properties of Al-Al2O3 composites fabricated by selective laser melting
Jiubin Jue et al.
POWDER TECHNOLOGY (2017)
Formation of Nanoscale Metallic Glassy Particle Reinforced Al-Based Composite Powders by High-Energy Milling
Weiwen Zhang et al.
METALS (2017)
Novel Composite Powders with Uniform TiB2 Nano-Particle Distribution for 3D Printing
Mengxing Chen et al.
APPLIED SCIENCES-BASEL (2017)
Influence of additive multilayer feature on thermodynamics, stress and microstructure development during laser 3D printing of aluminum-based material
Donghua Dai et al.
SCIENCE BULLETIN (2017)
On the microstructure, hardness and wear behavior of Al-Fe-Cr quasicrystal reinforced Al matrix composite prepared by selective laser melting
Nan Kang et al.
MATERIALS & DESIGN (2017)
Macro and nanoscale wear behaviour of Al-Al2O3 nanocomposites fabricated by selective laser melting
Quanquan Han et al.
COMPOSITES PART B-ENGINEERING (2017)
On the Breakdown of SiC during the Selective Laser Melting of Aluminum Matrix Composites
Lachlan Connor Astfalck et al.
ADVANCED ENGINEERING MATERIALS (2017)
Selective laser melting of nano-TiB2 decorated AlSi10Mg alloy with high fracture strength and ductility
X. P. Li et al.
ACTA MATERIALIA (2017)
Additive Manufacturing: Reproducibility of Metallic Parts
Konda Gokuldoss Prashanth et al.
TECHNOLOGIES (2017)
Processing of Al-12Si-TNM composites by selective laser melting and evaluation of compressive and wear properties
Konda G. Prashanth et al.
JOURNAL OF MATERIALS RESEARCH (2016)
Microstructure, defects and mechanical behavior of beta-type titanium porous structures manufactured by electron beam melting and selective laser melting
Y. J. Liu et al.
ACTA MATERIALIA (2016)
Influence of thermodynamics within molten pool on migration and distribution state of reinforcement during selective laser melting of AlN/AlSi 10Mg composites
Donghua Dai et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2016)
Selective laser melting of carbon/AlSi10Mg composites: Microstructure, mechanical and electronical properties
Xiao Zhao et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2016)
The microstructure and mechanical properties of selectively laser melted AlSi10Mg: The effect of a conventional T6-like heat treatment
Nesma T. Aboulkhair et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Selective laser melting of aluminium and aluminium metal matrix composites: review
T. B. Sercombe et al.
MATERIALS TECHNOLOGY (2016)
Microhardness and microstructure evolution of TiB2 reinforced Inconel 625/TiB2 composite produced by selective laser melting
Baicheng Zhang et al.
OPTICS AND LASER TECHNOLOGY (2016)
Synthesis and characterisation of advanced ball-milled Al-Al2O3 nanocomposites for selective laser melting
Quanquan Han et al.
POWDER TECHNOLOGY (2016)
Theoretical and experimental study on surface roughness of 316L stainless steel metal parts obtained through selective laser melting
Di Wang et al.
RAPID PROTOTYPING JOURNAL (2016)
Effect of the Thermodynamic Behavior of Selective Laser Melting on the Formation of In situ Oxide Dispersion-Strengthened Aluminum-Based Composites
Lianfeng Wang et al.
METALS (2016)
Tensile Properties of Al-12Si Fabricated via Selective Laser Melting (SLM) at Different Temperatures
Konda Gokuldoss Prashanth et al.
TECHNOLOGIES (2016)
A selective laser melting and solution heat treatment refined Al-12Si alloy with a controllable ultrafine eutectic microstructure and 25% tensile ductility
X. P. Li et al.
ACTA MATERIALIA (2015)
Tensile properties of Al-12Si matrix composites reinforced with Ti-Al-based particles
Z. Wang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
Selective laser melting of stainless-steel/nano-hydroxyapatite composites for medical applications: Microstructure, element distribution, crack and mechanical properties
Qingsong Wei et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2015)
Effect of Powder Particle Shape on the Properties of In Situ Ti-TiB Composite Materials Produced by Selective Laser Melting
Hooyar Attar et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2015)
Effects of brazing temperature and testing temperature on the microstructure and shear strength of γ-TiAl joints
Li Li et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Mechanical behavior of porous commercially pure Ti and Ti-TiB composite materials manufactured by selective laser melting
H. Attar et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Rapid fabrication of Al-based bulk-form nanocomposites with novel reinforcement and enhanced performance by selective laser melting
Dongdong Gu et al.
SCRIPTA MATERIALIA (2015)
Selective laser melting of in-situ Al4SiC4+SiC hybrid reinforced Al matrix composites: Influence of starting SiC particle size
Fei Chang et al.
SURFACE & COATINGS TECHNOLOGY (2015)
Hybrid nanostructured aluminum alloy with super-high strength
Zhi Wang et al.
NPG ASIA MATERIALS (2015)
Particulate migration behavior and its mechanism during selective laser melting of TiC reinforced Al matrix nanocomposites
Pengpeng Yuan et al.
MATERIALS & DESIGN (2015)
Build direction dependence of microstructure and high-temperature tensile property of Co-Cr-Mo alloy fabricated by electron beam melting
Shi-Hai Sun et al.
ACTA MATERIALIA (2014)
Selective laser melting of in situ titanium-titanium boride composites: Processing, microstructure and mechanical properties
Hooyar Attar et al.
ACTA MATERIALIA (2014)
Microstructure and properties of intermetallic composite coatings fabricated by selective laser melting of Ti-SiC powder mixtures
P. Krakhmalev et al.
INTERMETALLICS (2014)
Research on rapid manufacturing of CoCrMo alloy femoral component based on selective laser melting
Changhui Song et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2014)
Tensile properties of Al matrix composites reinforced with in situ devitrified Al84Gd6Ni7Co3 glassy particles
Z. Wang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2014)
Al-based metal matrix composites reinforced with Fe49.9Co35.1Nb7.7B4.5Si2.8 glassy powder: Mechanical behavior under tensile loading
D. Marko et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2014)
The effect of atmosphere on the structure and properties of a selective laser melted Al-12Si alloy
X. J. Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Fabrication and mechanical properties of Al-based metal matrix composites reinforced with Mg65Cu20Zn5Y10 metallic glass particles
Z. Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Mechanically alloyed nanocomposites
C. Suryanarayana et al.
PROGRESS IN MATERIALS SCIENCE (2013)
In Situ Formation of Particle Reinforced Al Matrix Composite by Selective Laser Melting of Al/Fe2O3 Powder Mixture
Sasan Dadbakhsh et al.
ADVANCED ENGINEERING MATERIALS (2012)
Study on energy input and its influences on single-track,multi-track, and multi-layer in SLM
Wang Di et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2012)
Effect of Al alloys on selective laser melting behaviour and microstructure of in situ formed particle reinforced composites
S. Dadbakhsh et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2012)
Comparison between current models for the strength of particulate-reinforced metal matrix nanocomposites with emphasis on consideration of Hall-Petch effect
A. Sanaty-Zadeh
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Experimental investigation on selective laser melting behaviour and processing windows of in situ reacted Al/Fe2O3 powder mixture
S. Dadbakhsh et al.
POWDER TECHNOLOGY (2012)
Structural and Mechanical Characterization of Zr58.5Ti8.2Cu14.2Ni11.4Al7.7 Bulk Metallic Glass
Konda G. Prashanth et al.
MATERIALS (2012)
Novel precipitate-microstructural architecture developed in the fabrication of solid copper components by additive manufacturing using electron beam melting
D. A. Ramirez et al.
ACTA MATERIALIA (2011)
Open-cellular copper structures fabricated by additive manufacturing using electron beam melting
D. A. Ramirez et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Manufacture by selective laser melting and mechanical behavior of a biomedical Ti-24Nb-4Zr-8Sn alloy
L. C. Zhang et al.
SCRIPTA MATERIALIA (2011)
Characterization of titanium aluminide alloy components fabricated by additive manufacturing using electron beam melting
L. E. Murr et al.
ACTA MATERIALIA (2010)
Influence of size and volume fraction of SiC particulates on properties of ex situ reinforced Al-4.5Cu-3Mg metal matrix composite prepared by direct metal laser sintering process
Subrata Kumar Ghosh et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Tensile Deformation and Fracture Mechanism of Bulk Bimodal Ultrafine-Grained Al-Mg Alloy
Zonghoon Lee et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2010)
Comparison of Microstructures and Mechanical Properties for Solid and Mesh Cobalt-Base Alloy Prototypes Fabricated by Electron Beam Melting
S. M. Gaytan et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2010)
Mechanical properties of Al-based metal matrix composites reinforced with Zr-based glassy particles produced by powder metallurgy
S. Scudino et al.
ACTA MATERIALIA (2009)
Crystallization kinetics and consolidation of mechanically alloyed Al70Y16Ni10Co4 glassy powders
K. G. Prashanth et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2009)
Investigations of MX and γ′/γ precipitates in the nickel-based superalloy 718 produced by electron beam melting
A. Strondl et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Absorption of Nd:YAG laser beam by metallic alloys
EMR Silva et al.
JOURNAL OF MATERIALS SCIENCE LETTERS (2000)
Selective laser sintering of gas atomized M2 high speed steel powder
HJ Niu et al.
JOURNAL OF MATERIALS SCIENCE (2000)