相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Trade-Off between Exciton Dissociation and Carrier Recombination and Dielectric Properties in Y6-Sensitized Nonfullerene Ternary Organic Solar Cells
Leiping Duan et al.
ENERGY TECHNOLOGY (2020)
Flexible All-Solution-Processed Organic Solar Cells with High-Performance Nonfullerene Active Layers
Lulu Sun et al.
ADVANCED MATERIALS (2020)
Solution-Processable PEDOT:PSS:α-In2Se3 with Enhanced Conductivity as a Hole Transport Layer for High-Performance Polymer Solar Cells
Jianming Wang et al.
ACS APPLIED MATERIALS & INTERFACES (2020)
Narrow Bandpass and Efficient Semitransparent Organic Solar Cells Based on Bioinspired Spectrally Selective Electrodes
Shu Wang et al.
ACS NANO (2020)
Single-Junction Organic Photovoltaic Cells with Approaching 18% Efficiency
Yong Cui et al.
ADVANCED MATERIALS (2020)
Optimizing the component ratio of PEDOT:PSS by water rinse for high solar cells over 16.7%
Qicong Li et al.
SCIENCE BULLETIN (2020)
18% Efficiency organic solar cells
Qishi Liu et al.
SCIENCE BULLETIN (2020)
Printable SnO2 cathode interlayer with up to 500 nm thickness-tolerance for high-performance and large-area organic solar cells
Yiming Bai et al.
SCIENCE CHINA-CHEMISTRY (2020)
Cathode engineering with perylene-diimide interlayer enabling over 17% efficiency single-junction organic solar cells
Jia Yao et al.
NATURE COMMUNICATIONS (2020)
High-Performance Tandem Organic Solar Cells Using HSolar as the Interconnecting Layer
Carr Hoi Yi Ho et al.
ADVANCED ENERGY MATERIALS (2020)
High-Performance Nonfullerene Organic Photovoltaics Applicable for Both Outdoor and Indoor Environments through Directional Photon Energy Transfer
Yong Woon Han et al.
ACS APPLIED MATERIALS & INTERFACES (2020)
Low-Bandgap Porphyrins for Highly Efficient Organic Solar Cells: Materials, Morphology, and Applications
Ke Gao et al.
ADVANCED MATERIALS (2020)
A Cost-Effective, Aqueous-Solution-Processed Cathode Interlayer Based on Organosilica Nanodots for Highly Efficient and Stable Organic Solar Cells
Mengqi Cui et al.
ADVANCED MATERIALS (2020)
Highly Efficient Nonfullerene Organic Photovoltaic Devices with 10% Power Conversion Efficiency Enabled by a Fine-Tuned and Solution-Processed Hole-Transporting Layer
Nai-Wei Teng et al.
SOLAR RRL (2020)
A thiophene-fused benzotriazole unit as a ??-bridge? in A-?-D-?-A type acceptor to achieve more balanced J SC and V OC for OSCs
Jiacheng Wang et al.
ORGANIC ELECTRONICS (2020)
Self-Assembled Monolayer Enables Hole Transport Layer-Free Organic Solar Cells with 18% Efficiency and Improved Operational Stability
Yuanbao Lin et al.
ACS ENERGY LETTERS (2020)
Single-Component Non-halogen Solvent-Processed High-Performance Organic Solar Cell Module with Efficiency over 14%
Sheng Dong et al.
JOULE (2020)
Origin of Open-Circuit Voltage Turnover in Organic Solar Cells at Low Temperature
Yahui Tang et al.
SOLAR RRL (2020)
Synergistic Optimization Enables Large-Area Flexible Organic Solar Cells to Maintain over 98% PCE of the Small-Area Rigid Devices
Guodong Wang et al.
ADVANCED MATERIALS (2020)
Incorporation of Hydrogen Molybdenum Bronze in Solution-Processed Interconnecting Layer for Efficient Nonfullerene Tandem Organic Solar Cells
Wenwu Zeng et al.
SOLAR RRL (2020)
Scalable fabrication of organic solar cells based on non-fullerene acceptors
Anders S. Gertsen et al.
FLEXIBLE AND PRINTED ELECTRONICS (2020)
A Layer-by-Layer Architecture for Printable Organic Solar Cells Overcoming the Scaling Lag of Module Efficiency
Rui Sun et al.
JOULE (2020)
Achieving over 16% efficiency for single-junction organic solar cells
Baobing Fan et al.
SCIENCE CHINA-CHEMISTRY (2019)
Stability of Nonfullerene Organic Solar Cells: from Built-in Potential and Interfacial Passivation Perspectives
Yiwen Wang et al.
ADVANCED ENERGY MATERIALS (2019)
Key Parameters Requirements for Non-Fullerene-Based Organic Solar Cells with Power Conversion Efficiency >20%
Yuliar Firdaus et al.
ADVANCED SCIENCE (2019)
p-Doped Conducting Polyelectrolyte as an Anode Interlayer Enables High Efficiency for 1 cm2 Printed Organic Solar Cells
Qian Kang et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
Medium-Bandgap Conjugated Polymer Donors for Organic Photovoltaics
Liya Sun et al.
MACROMOLECULAR RAPID COMMUNICATIONS (2019)
Ternary Organic Solar Cells with Small Nonradiative Recombination Loss
Yuanpeng Xie et al.
ACS ENERGY LETTERS (2019)
Phase Stability Diagrams of Group 6 Magneli Oxides and Their Implications for Photon-Assisted Applications
Yun-Jae Lee et al.
CHEMISTRY OF MATERIALS (2019)
PEDOT:PSS for Flexible and Stretchable Electronics: Modifications, Strategies, and Applications
Xi Fan et al.
ADVANCED SCIENCE (2019)
17% Efficient Organic Solar Cells Based on Liquid Exfoliated WS2 as a Replacement for PEDOT:PSS
Yuanbao Lin et al.
ADVANCED MATERIALS (2019)
A General Approach for Lab-to-Manufacturing Translation on Flexible Organic Solar Cells
Xiangchuan Meng et al.
ADVANCED MATERIALS (2019)
13.9%-Efficiency and Eco-Friendly Nonfullerene Polymer Solar Cells Obtained by Balancing Molecular Weight and Solubility in Chlorinated Thiophene-Based Polymer Backbones
Sung Jae Jeon et al.
SMALL (2019)
Evaporation-Free Nonfullerene Flexible Organic Solar Cell Modules Manufactured by An All-Solution Process
Yong Woon Han et al.
ADVANCED ENERGY MATERIALS (2019)
12.5% Flexible Nonfullerene Solar Cells by Passivating the Chemical Interaction Between the Active Layer and Polymer Interfacial Layer
Sixing Xiong et al.
ADVANCED MATERIALS (2019)
Highly Efficient and High Peak Transmittance Colorful Semitransparent Organic Solar Cells with Hybrid-Electrode-Mirror Microcavity Structure
Jinyao Zhong et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
Vertical Phase Separation for Highly Efficient Organic Solar Cells Incorporating Conjugated-Polyelectrolytes
Yong Woon Han et al.
ADVANCED MATERIALS INTERFACES (2019)
Impact of Eumelanin-PEDOT Blending: Increased PEDOT Crystalline Order and Packing-Conductivity Relationship in Ternary PEDOT:PSS:Eumelanin Thin Films
Ludovico Migliaccio et al.
ADVANCED ELECTRONIC MATERIALS (2019)
Beyond Fullerenes: Indacenodithiophene-Based Organic Charge-Transport Layer toward Upscaling of Low-Cost Perovskite Solar Cells
Dechan Angmo et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
Printable MoOx Anode Interlayers for Organic Solar Cells
Qian Kang et al.
ADVANCED MATERIALS (2018)
P3HT: non-fullerene acceptor based large area, semi-transparent PV modules with power conversion efficiencies of 5%, processed by industrially scalable methods
S. Strohm et al.
ENERGY & ENVIRONMENTAL SCIENCE (2018)
Over 100-nm-Thick MoOx Films with Superior Hole Collection and Transport Properties for Organic Solar Cells
Bei Yang et al.
ADVANCED ENERGY MATERIALS (2018)
Fine Tuning the Light Distribution within the Photoactive Layer by Both Solution-Processed Anode and Cathode Interlayers for High Performance Polymer Solar Cells
Fuzhi Wang et al.
SOLAR RRL (2018)
Structural and electrochemical properties of spray deposited molybdenum trioxide (α-MoO3) thin films
S. A. Khalate et al.
JOURNAL OF SOLID STATE ELECTROCHEMISTRY (2017)
Transparent WO3/Ag/WO3 electrode for flexible organic solar cells
Yishan Wang et al.
MATERIALS LETTERS (2017)
Medium Bandgap Polymer Donor Based on Bi(trialkylsilylthienyl-benzo[1,2-b:4,5-b′]-difuran) for High Performance Nonfullerene Polymer Solar Cells
Haijun Bin et al.
ADVANCED ENERGY MATERIALS (2017)
Functional solid additive modified PEDOT: PSS as an anode buffer layer for enhanced photovoltaic performance and stability in polymer solar cells
Binrui Xu et al.
SCIENTIFIC REPORTS (2017)
A highly stretchable, transparent, and conductive polymer
Yue Wang et al.
SCIENCE ADVANCES (2017)
High-Performance Colorful Semitransparent Polymer Solar Cells with Ultrathin Hybrid-Metal Electrodes and Fine-Tuned Dielectric Mirrors
Guiying Xu et al.
ADVANCED FUNCTIONAL MATERIALS (2017)
Structurally-driven Enhancement of Thermoelectric Properties within Poly(3,4-ethylenedioxythiophene) thin Films
Ioannis Petsagkourakis et al.
SCIENTIFIC REPORTS (2016)
Solution-Processed Small-Molecule Bulk Heterojunctions: Leakage Currents and the Dewetting Issue for Inverted Solar Cells
Elodie Destouesse et al.
ACS APPLIED MATERIALS & INTERFACES (2015)
Nafion-Modified MoOx as Effective Room-Temperature Hole Injection Layer for Stable, High-Performance Inverted Organic Solar Cells
Weiming Qiu et al.
ACS APPLIED MATERIALS & INTERFACES (2015)
Solution-Processed MoO3:PEDOT:PSS Hybrid Hole Transporting Layer for Inverted Polymer Solar Cells
Yiling Wang et al.
ACS APPLIED MATERIALS & INTERFACES (2015)
HOMO energy level regulation of novel conjugated copolymers for polymer solar cells
Jianfeng Zhang et al.
NEW JOURNAL OF CHEMISTRY (2015)
Enhanced electroluminescent efficiency with ionic liquid doped into PEDOT:PSS hole-injecting layer
Yingliang Liu et al.
POLYMER (2015)
Optimization of the Power Conversion Efficiency of Room Temperature-Fabricated Polymer Solar Cells Utilizing Solution Processed Tungsten Oxide and Conjugated Polyelectrolyte as Electrode Interlayer
Lie Chen et al.
ADVANCED FUNCTIONAL MATERIALS (2014)
Real-time measurement of optical anisotropy during film growth using a chemical mist deposition of poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate)
T. Hiate et al.
JOURNAL OF APPLIED PHYSICS (2014)
Low-Temperature Solution-Processed Hydrogen Molybdenum and Vanadium Bronzes for an Efficient Hole-Transport Layer in Organic Electronics
Fengxian Xie et al.
ADVANCED MATERIALS (2013)
Secondary doping methods to significantly enhance the conductivity of PEDOT:PSS for its application as transparent electrode of optoelectronic devices
Jianyong Ouyang
DISPLAYS (2013)
Influence of a novel fluorosurfactant modified PEDOT:PSS hole transport layer on the performance of inverted organic solar cells
Fang Jeng Lim et al.
JOURNAL OF MATERIALS CHEMISTRY (2012)
Open-circuit voltage in organic solar cells
Boyuan Qi et al.
JOURNAL OF MATERIALS CHEMISTRY (2012)
Materials interface engineering for solution-processed photovoltaics
Michael Graetzel et al.
NATURE (2012)
Nanostructured Tungsten Oxide - Properties, Synthesis, and Applications
Haidong Zheng et al.
ADVANCED FUNCTIONAL MATERIALS (2011)
Selective Dye Loading at the Heterojunction in Polymer/Fullerene Solar Cells
Satoshi Honda et al.
ADVANCED ENERGY MATERIALS (2011)
Degradation Patterns in Water and Oxygen of an Inverted Polymer Solar Cell
Kion Norrman et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2010)
Evolution of nanomorphology and anisotropic conductivity in solvent-modified PEDOT:PSS films for polymeric anodes of polymer solar cells
Seok-In Na et al.
JOURNAL OF MATERIALS CHEMISTRY (2009)
Electrochromic writing and erasing on tungsten oxide films in air by scanning tunneling microscopy
H Qiu et al.
JOURNAL OF APPLIED PHYSICS (2002)
分享论文
