相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Inkjet-Printed Micrometer-Thick Perovskite Solar Cells with Large Columnar Grains
Helge Eggers et al.
ADVANCED ENERGY MATERIALS (2020)
Consensus statement for stability assessment and reporting for perovskite photovoltaics based on ISOS procedures
Mark V. Khenkin et al.
NATURE ENERGY (2020)
Hermetic seal for perovskite solar cells: An improved plasma enhanced atomic layer deposition encapsulation
Haoran Wang et al.
NANO ENERGY (2020)
Toward Stable Perovskite Solar Cell Architectures: Robustness Against Temperature Variations of Real-World Conditions
Jonas A. Schwenzer et al.
IEEE JOURNAL OF PHOTOVOLTAICS (2020)
Stabilization of Black Perovskite Phase in FAPbI3 and CsPbI3
Sofia Masi et al.
ACS ENERGY LETTERS (2020)
A holistic approach to interface stabilization for efficient perovskite solar modules with over 2,000-hour operational stability
Zonghao Liu et al.
NATURE ENERGY (2020)
Crystallization tailoring of cesium/formamidinium double -cation perovskite for efficient and highly stable solar cells
Jianchao Yang et al.
JOURNAL OF ENERGY CHEMISTRY (2020)
Relation between Fluorescence Quantum Yield and Open-Circuit Voltage in Complete Perovskite Solar Cells
Mariia Kramarenko et al.
SOLAR RRL (2020)
Interfacial Contact Passivation for Efficient and Stable Cesium-Formamidinium Double-Cation Lead Halide Perovskite Solar Cells
Yu Chen et al.
ISCIENCE (2020)
Halide Perovskites: Is It All about the Interfaces?
Philip Schulz et al.
CHEMICAL REVIEWS (2019)
Monoammonium Porphyrin for Blade-Coating Stable Large-Area Perovskite Solar Cells with >18% Efficiency
Congping Li et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2019)
A chemically inert bismuth interlayer enhances long-term stability of inverted perovskite solar cells
Shaohang Wu et al.
NATURE COMMUNICATIONS (2019)
Electron-Beam-Evaporated Nickel Oxide Hole Transport Layers for Perovskite-Based Photovoltaics
Tobias Abzieher et al.
ADVANCED ENERGY MATERIALS (2019)
Model for the Prediction of the Lifetime and Energy Yield of Methyl Ammonium Lead Iodide Perovskite Solar Cells at Elevated Temperatures
Joao P. Bastos et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
Retarding Thermal Degradation in Hybrid Perovskites by Ionic Liquid Additives
Rui Xia et al.
ADVANCED FUNCTIONAL MATERIALS (2019)
Surface passivation of perovskite film for efficient solar cells
Qi Jiang et al.
NATURE PHOTONICS (2019)
Planar perovskite solar cells with long-term stability using ionic liquid additives
Sai Bai et al.
NATURE (2019)
On the Relation between the Open-Circuit Voltage and Quasi-Fermi Level Splitting in Efficient Perovskite Solar Cells
Pietro Caprioglio et al.
ADVANCED ENERGY MATERIALS (2019)
Crystal Orientation and Grain Size: Do They Determine Optoelectronic Properties of MAPbI3 Perovskite?
Loreta A. Muscarella et al.
JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2019)
Quantifying the Interface Defect for the Stability Origin of Perovskite Solar Cells
Jionghua Wu et al.
ADVANCED ENERGY MATERIALS (2019)
Mechanism of PbI2 in Situ Passivated Perovskite Films for Enhancing the Performance of Perovskite Solar Cells
Yichuan Chen et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
Compositional Engineering for Thermally Stable, Highly Efficient Perovskite Solar Cells Exceeding 20% Power Conversion Efficiency with 85 °C/85% 1000 h Stability
Taisuke Matsui et al.
ADVANCED MATERIALS (2019)
A chain is as strong as its weakest link - Stability study of MAPbI3 under light and temperature
Philippe Holzhey et al.
MATERIALS TODAY (2019)
The Role of Charge Selective Contacts in Perovskite Solar Cell Stability
Bart Roose et al.
ADVANCED ENERGY MATERIALS (2019)
The Relation of Phase-Transition Effects and Thermal Stability of Planar Perovskite Solar Cells
Chuanjiang Qin et al.
ADVANCED SCIENCE (2019)
Semitransparent FAPbI3-xBrx Perovskite Solar Cells Stable under Simultaneous Damp Heat (85 °C/85%) and 1 Sun Light Soaking
Jin Hyuck Heo et al.
ADVANCED MATERIALS TECHNOLOGIES (2019)
Caffeine Improves the Performance and Thermal Stability of Perovskite Solar Cells
Rui Wang et al.
JOULE (2019)
Methylammonium Chloride Induces Intermediate Phase Stabilization for Efficient Perovskite Solar Cells
Minjin Kim et al.
JOULE (2019)
The impact of energy alignment and interfacial recombination on the internal and external open-circuit voltage of perovskite solar cells
Martin Stolterfoht et al.
ENERGY & ENVIRONMENTAL SCIENCE (2019)
Point defect-reduced colloidal SnO2 electron transport layers for stable and almost hysteresis-free perovskite solar cells
Yeonkyeong Ju et al.
RSC ADVANCES (2019)
Efficient Perovskite Solar Cell Modules with High Stability Enabled by Iodide Diffusion Barriers
Enbing Bi et al.
JOULE (2019)
Temperature Variation-Induced Performance Decline of Perovskite Solar Cells
Jonas A. Schwenzer et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
Enhancing Moisture and Water Resistance in Perovskite Solar Cells by Encapsulation with Ultrathin Plasma Polymers
Jesus Idigoras et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
How to Make over 20% Efficient Perovskite Solar Cells in Regular (n-i-p) and Inverted (p-i-n) Architectures
Michael Saliba et al.
CHEMISTRY OF MATERIALS (2018)
Design and understanding of encapsulated perovskite solar cells to withstand temperature cycling
Rongrong Cheacharoen et al.
ENERGY & ENVIRONMENTAL SCIENCE (2018)
The role of PbI2 in CH3NH3PbI3 perovskite stability, solar cell parameters and device degradation
Tanaji P. Gujar et al.
PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2018)
Barrier Design to Prevent Metal-Induced Degradation and Improve Thermal Stability in Perovskite Solar Cells
Caleb C. Boyd et al.
ACS ENERGY LETTERS (2018)
Systematic investigation of the impact of operation conditions on the degradation behaviour of perovskite solar cells
Konrad Domanski et al.
NATURE ENERGY (2018)
Understanding how excess lead iodide precursor improves halide perovskite solar cell performance
Byung-wook Park et al.
NATURE COMMUNICATIONS (2018)
Perovskite Solar Cells Employing Copper Phthalocyanine Hole-Transport Material with an Efficiency over 20% and Excellent Thermal Stability
The Duong et al.
ACS ENERGY LETTERS (2018)
Impact of Moisture on Photoexcited Charge Carrier Dynamics in Methylammonium Lead Halide Perovskites
Zhaoning Song et al.
JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2018)
Tailored Phase Conversion under Conjugated Polymer Enables Thermally Stable Perovskite Solar Cells with Efficiency Exceeding 21%
Lei Meng et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2018)
Methylammonium-free, high-performance, and stable perovskite solar cells on a planar architecture
Silver-Hamill Turren-Cruz et al.
SCIENCE (2018)
All-inorganic cesium lead iodide perovskite solar cells with stabilized efficiency beyond 15%
Kang Wang et al.
NATURE COMMUNICATIONS (2018)
Defects engineering for high-performance perovskite solar cells
Feng Wang et al.
NPJ FLEXIBLE ELECTRONICS (2018)
Stability of Perovskite Solar Cells: A Prospective on the Substitution of the ACation and XAnion
Ze Wang et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2017)
Sequential Introduction of Cations Deriving Large-Grain CsxFA1-xPbI3 Thin Film for Planar Hybrid Solar Cells: Insight into Phase-Segregation and Thermal-Healing Behavior
Jiahao Huang et al.
SMALL (2017)
Extrinsic ion migration in perovskite solar cells
Zhen Li et al.
ENERGY & ENVIRONMENTAL SCIENCE (2017)
Probing the Intrinsic Thermal and Photochemical Stability of Hybrid and Inorganic Lead Halide Perovskites
Azat F. Akbulatov et al.
JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2017)
Quantitative Phase-Change Thermodynamics and Metastability of Perovskite-Phase Cesium Lead Iodide
Subham Dastidar et al.
JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2017)
Structural, optical, and electrical properties of phase-controlled cesium lead iodide nanowires
Minliang Lai et al.
NANO RESEARCH (2017)
Perovskite solar cells with CuSCN hole extraction layers yield stabilized efficiencies greater than 20%
Neha Arora et al.
SCIENCE (2017)
Suppressed decomposition of organometal halide perovskites by impermeable electron-extraction layers in inverted solar cells
K. O. Brinkmann et al.
NATURE COMMUNICATIONS (2017)
Diffusion engineering of ions and charge carriers for stable efficient perovskite solar cells
Enbing Bi et al.
NATURE COMMUNICATIONS (2017)
Enhancement of thermal stability for perovskite solar cells through cesium doping
Guangda Niu et al.
RSC ADVANCES (2017)
Optical Analysis of Planar Multicrystalline Perovskite Solar Cells
Maarten van Eerden et al.
ADVANCED OPTICAL MATERIALS (2017)
Organometal Halide Perovskite Solar Cells with Improved Thermal Stability via Grain Boundary Passivation Using a Molecular Additive
Chaneui Park et al.
ADVANCED FUNCTIONAL MATERIALS (2017)
Heat- and Gas-Induced Transformation in CH3NH3PbI3 Perovskites and Its Effect on the Efficiency of Solar Cells
Weixin Huang et al.
CHEMISTRY OF MATERIALS (2017)
An Interdiffusion Method for Highly Performing Cesium/Formamidinium Double Cation Perovskites
Weiming Qiu et al.
ADVANCED FUNCTIONAL MATERIALS (2017)
Thermally Stable MAPbI3 Perovskite Solar Cells with Efficiency of 19.19% and Area over 1 cm2 achieved by Additive Engineering
Yongzhen Wu et al.
ADVANCED MATERIALS (2017)
NiOx Hole Transport Layer for Perovskite Solar Cells with Improved Stability and Reproducibility
Md. Bodiul Islam et al.
ACS OMEGA (2017)
Stabilized Wide Bandgap MAPbBrxI3-x Perovskite by Enhanced Grain Size and Improved Crystallinity
Miao Hu et al.
ADVANCED SCIENCE (2016)
Aluminum-Doped Zinc Oxide as Highly Stable Electron Collection Layer for Perovskite Solar Cells
Xingyue Zhao et al.
ACS APPLIED MATERIALS & INTERFACES (2016)
Thermal and Environmental Stability of Semi-Transparent Perovskite Solar Cells for Tandems Enabled by a Solution-Processed Nanoparticle Buffer Layer and Sputtered ITO Electrode
Kevin A. Bush et al.
ADVANCED MATERIALS (2016)
100°C Thermal Stability of Printable Perovskite Solar Cells Using Porous Carbon Counter Electrodes
Ajay K. Baranwal et al.
CHEMSUSCHEM (2016)
Cesium-containing triple cation perovskite solar cells: improved stability, reproducibility and high efficiency
Michael Saliba et al.
ENERGY & ENVIRONMENTAL SCIENCE (2016)
Unreacted PbI2 as a Double-Edged Sword for Enhancing the Performance of Perovskite Solar Cells
T. Jesper Jacobsson et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2016)
Incorporation of rubidium cations into perovskite solar cells improves photovoltaic performance
Michael Saliba et al.
SCIENCE (2016)
A mixed-cation lead mixed-halide perovskite absorber for tandem solar cells
David P. McMeekin et al.
SCIENCE (2016)
Is Excess PbI2 Beneficial for Perovskite Solar Cell Performance?
Fangzhou Liu et al.
ADVANCED ENERGY MATERIALS (2016)
Bandgap-Tunable Cesium Lead Halide Perovskites with High Thermal Stability for Efficient Solar Cells
Rebecca J. Sutton et al.
ADVANCED ENERGY MATERIALS (2016)
Grain-Size-Limited Mobility in Methylammonium Lead Iodide Perovskite Thin Films
Obadiah G. Reid et al.
ACS ENERGY LETTERS (2016)
On the Thermal and Thermodynamic (In)Stability of Methylammonium Lead Halide Perovskites
Bruno Brunetti et al.
SCIENTIFIC REPORTS (2016)
Enhancing Thermal Stability and Lifetime of Solid-State Dye-Sensitized Solar Cells via Molecular Engineering of the Hole-Transporting Material Spiro-OMeTAD
Tadas Malinauskas et al.
ACS APPLIED MATERIALS & INTERFACES (2015)
The Role of Oxygen in the Degradation of Methylammonium Lead Trihalide Perovskite Photoactive Layers
Nicholas Aristidou et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2015)
Chemical and Electronic Structure Characterization of Lead Halide Perovskites and Stability Behavior under Different Exposures-A Photoelectron Spectroscopy Investigation
Bertrand Philippe et al.
CHEMISTRY OF MATERIALS (2015)
Water Infiltration in Methylammonium Lead Iodide Perovskite: Fast and Inconspicuous
Christian Mueller et al.
CHEMISTRY OF MATERIALS (2015)
Cubic Perovskite Structure of Black Formamidinium Lead Iodide, α-[HC(NH2)2]PbI3, at 298 K
Mark T. Weller et al.
JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2015)
Formamidinium and Cesium Hybridization for Photo- and Moisture-Stable Perovskite Solar Cell
Jin-Wook Lee et al.
ADVANCED ENERGY MATERIALS (2015)
Intrinsic Thermal Instability of Methylammonium Lead Trihalide Perovskite
Bert Conings et al.
ADVANCED ENERGY MATERIALS (2015)
Formamidinium lead trihalide: a broadly tunable perovskite for efficient planar heterojunction solar cells
Giles E. Eperon et al.
ENERGY & ENVIRONMENTAL SCIENCE (2014)
Realistic absorption coefficient of ultrathin films
M. Cesaria et al.
JOURNAL OF OPTICS (2012)
Consensus stability testing protocols for organic photovoltaic materials and devices
Matthew O. Reese et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2011)
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
Akihiro Kojima et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2009)