相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。3D printing of multilayered orodispersible films with in-process drying
Jan Elbl et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2020)
Orodispersible films containing ball milled aripiprazole-poloxamer®407 solid dispersions
Ewelina Lyszczarz et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2020)
Trends in the production methods of orodispersible films
Umberto M. Musazzi et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2020)
Orodispersible Polymer Films with the Poorly Water-Soluble Drug, Olanzapine: Hot-Melt Pneumatic Extrusion for Single-Process 3D Printing
Hui-Won Cho et al.
PHARMACEUTICS (2020)
The potential of Streptococcus salivarius oral films in the management of dental caries: An inkjet printing approach
Cornelius C. Dodoo et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2020)
Scaling-up medical technologies using flexographic printing
Abdulaziz K. Assaifan et al.
TALANTA (2020)
Evaluation of self-nanoemulsifying drug delivery systems using multivariate methods to optimize permeability of captopril oral films
Sawani D. Talekar et al.
EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2019)
A new melatonin oral delivery platform based on orodispersible films containing solid lipid microparticles
Umberto M. Musazzi et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2019)
Formulation and characterization of fast dissolving oral films containing buspirone hydrochloride nanoparticles using design of experiment
Kanchan Bharti et al.
JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY (2019)
Preparation and characterization of nanocomposite films based on gum arabic, maltodextrin and polyethylene glycol reinforced with turmeric nanofiber isolated from turmeric spent
Sreeraj Gopi et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2019)
Additive manufacturing of personalized orodispersible warfarin films
Erica Sjoholm et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2019)
Towards Printed Pediatric Medicines in Hospital Pharmacies: Comparison of 2D and 3D-Printed Orodispersible Warfarin Films with Conventional Oral Powders in Unit Dose Sachets
Heidi Oblom et al.
PHARMACEUTICS (2019)
Oromucosal films: from patient centricity to production by printing techniques
Yu Tian et al.
EXPERT OPINION ON DRUG DELIVERY (2019)
Recent advances in pharmaceutical dosage forms and devices using additive manufacturing technologies
Christos I. Gioumouxouzis et al.
DRUG DISCOVERY TODAY (2019)
Preparation and evaluation of orally disintegrating film containing donepezil for Alzheimer disease
Xiaopeng Han et al.
JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY (2019)
Micronized Zaleplon Delivery via Orodispersible Film and Orodispersible Tablets
Prashanth Manda et al.
AAPS PHARMSCITECH (2018)
Personalisation of warfarin therapy using thermal ink-jet printing
Parameswara Rao Vuddanda et al.
EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2018)
A novel unit-dose approach for the pharmaceutical compounding of an orodispersible film
Wen Chin Foo et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2018)
Continuous inkjet printing of enalapril maleate onto orodispersible film formulations
Yasmin Thabet et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2018)
QR encoded smart oral dosage forms by inkjet printing
Magnus Edinger et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2018)
Incorporation of surface-modified dry micronized poorly water-soluble drug powders into polymer strip films
Lu Zhang et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2018)
Application of miniaturized near-infrared spectroscopy for quality control of extemporaneous orodispersible films
Wen Chin Foo et al.
JOURNAL OF PHARMACEUTICAL AND BIOMEDICAL ANALYSIS (2018)
The Application of 3D Printing in the Formulation of Multilayered Fast Dissolving Oral Films
Touraj Ehtezazi et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2018)
In Vitro Evaluation of 2D-Printed Edible Films for the Buccal Delivery of Diclofenac Sodium
Georgios K. Eleftheriadis et al.
MATERIALS (2018)
3D printing of a wearable personalized oral delivery device: A first-in-human study
Kun Liang et al.
SCIENCE ADVANCES (2018)
Material Considerations for Fused-Filament Fabrication of Solid Dosage Forms
Evert Fuenmayor et al.
PHARMACEUTICS (2018)
Printing T3 and T4 oral drug combinations as a novel strategy for hypothyroidism
Mustafa Alomari et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2018)
Printing pharmaceuticals by inkjet technology: Proof of concept for standalone and continuous in-line printing on orodispersible films
Yasmin Thabet et al.
JOURNAL OF MANUFACTURING PROCESSES (2018)
Colorimetry as Quality Control Tool for Individual Inkjet-Printed Pediatric Formulations
Henrika Wickstrom et al.
AAPS PHARMSCITECH (2017)
A new chapter in pharmaceutical manufacturing: 3D-printed drug products
James Norman et al.
ADVANCED DRUG DELIVERY REVIEWS (2017)
Oral fast-dissolving films containing lutein nanocrystals for improved bioavailability: formulation development, in vitro and in vivo evaluation
Chen Liu et al.
AAPS PHARMSCITECH (2017)
Hot-Melt Extrusion: from Theory to Application in Pharmaceutical Formulation
Hemlata Patil et al.
AAPS PHARMSCITECH (2016)
Development of fast dissolving oral films containing lercanidipine HCl nanoparticles in semicrystalline polymeric matrix for enhanced dissolution and ex vivo permeation
Ankita D. Chonkar et al.
EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2016)
Printing medicines as orodispersible dosage forms: Effect of substrate on the printed micro-structure
C. Planchette et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2016)
3D printing in pharmaceutics: A new tool for designing customized drug delivery systems
Goole Jonathan et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2016)
Ink-jet printing versus solvent casting to prepare oral films: Effect on mechanical properties and physical stability
Asma B. M. Buanz et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2015)
Preparation and Characterization of Ultrarapidly Dissolving Orodispersible Films for Treating and Preventing Iodine Deficiency in the Pediatric Population
Cholpon Rustemkyzy et al.
JOURNAL OF AGRICULTURAL AND FOOD CHEMISTRY (2015)
Hot melt extrusion: An industrially feasible approach for casting orodispersible film
Rushiraj Jani et al.
ASIAN JOURNAL OF PHARMACEUTICAL SCIENCES (2015)
Design and evaluation of bilayered buccal film preparations for local administration of lidocaine hydrochloride
Maren Preis et al.
EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2014)
An approach to design and fabrication of a piezo-actuated microdroplet generator
Hesam Sadeghian et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2014)
Fast dissolving paracetamol/caffeine nanofibers prepared by electrospinning
U. Eranka Illangakoon et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2014)
Dropwise Additive Manufacturing of Pharmaceutical Products for Solvent-Based Dosage Forms
Laura Hirshfield et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2014)
Comparative study on novel test systems to determine disintegration time of orodispersible films
Maren Preis et al.
JOURNAL OF PHARMACY AND PHARMACOLOGY (2014)
Inkjet printing for pharmaceutical applications
Ryan D. Boehm et al.
MATERIALS TODAY (2014)
Human Cartilage Tissue Fabrication Using Three-dimensional Inkjet Printing Technology
Xiaofeng Cui et al.
JOVE-JOURNAL OF VISUALIZED EXPERIMENTS (2014)
Evaluation of different substrates for inkjet printing of rasagiline mesylate
Natalja Genina et al.
EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2013)
Novel probiotic dissolvable carboxymethyl cellulose films as oral health biotherapeutics: in vitro preparation and characterization
Shyamali Saha et al.
EXPERT OPINION ON DRUG DELIVERY (2013)
Behavior of printable formulations of loperamide and caffeine on different substrates-Effect of print density in inkjet printing
Natalja Genina et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2013)
Drug-printing by flexographic printing technology-A new manufacturing process for orodispersible films
Eva Maria Janssen et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2013)
A Step Toward Development of Printable Dosage Forms for Poorly Soluble Drugs
Dhara Raijada et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2013)
Tailoring controlled-release oral dosage forms by combining inkjet and flexographic printing techniques
Natalja Genina et al.
EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2012)
Recent advances in inkjet dispensing technologies: applications in drug discovery
Xiangcheng Zhu et al.
EXPERT OPINION ON DRUG DISCOVERY (2012)
Fabrication of drug-loaded polymer microparticles with arbitrary geometries using a piezoelectric inkjet printing system
Byung Kook Lee et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2012)
Advances in orodispersible films for drug delivery
Eva Maria Hoffmann et al.
EXPERT OPINION ON DRUG DELIVERY (2011)
Nanosuspensions as advanced printing ink for accurate dosing of poorly soluble drugs in personalized medicines
Jana Pardeike et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2011)
Inkjet printing as a novel medicine formulation technique
Nikolaos Scoutaris et al.
JOURNAL OF CONTROLLED RELEASE (2011)
Inkjet Printing of Drug Substances and Use of Porous Substrates-Towards Individualized Dosing
Niklas Sandler et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2011)
Preparation of Personalized-dose Salbutamol Sulphate Oral Films with Thermal Ink-Jet Printing
Asma B. M. Buanz et al.
PHARMACEUTICAL RESEARCH (2011)
Development of Zingiber officinale in oral dissolving films: Effect of polymers on in vitro, in vivo parameters and clinical efficacy
Anwar S. Daud et al.
ASIAN JOURNAL OF PHARMACEUTICS (2011)
Formulation of a Novel Tianeptine Sodium Orodispersible Film
Doaa Ahmed El-Setouhy et al.
AAPS PHARMSCITECH (2010)
Oral strip technology: Overview and future potential
R. P. Dixit et al.
JOURNAL OF CONTROLLED RELEASE (2009)
Formulation and evaluation of fast dissolving films for delivery of triclosan to the oral cavity
Aditya Dinge et al.
AAPS PHARMSCITECH (2008)
Fast dissolving films made of maltodextrins
Francesco Cilurzo et al.
EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2008)
Thermal inkjet application in the preparation of oral dosage forms: Dispensing of prednisolone solutions and polymorphic characterization by solid-state spectroscopic techniques
Peter A. Melendez et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2008)
Inkjet printing as a deposition and patterning tool for polymers and inorganic particles
Emine Tekin et al.
SOFT MATTER (2008)
Ultra-high-resolution monolithic thermal bubble inkjet print head
Yan Wang et al.
JOURNAL OF MICRO-NANOLITHOGRAPHY MEMS AND MOEMS (2007)
The application of ink-jet technology for the coating and loading of drug-eluting stents
Peter J. Tarcha et al.
ANNALS OF BIOMEDICAL ENGINEERING (2007)
Inkjet printing of polymers: State of the art and future developments
BJ de Gans et al.
ADVANCED MATERIALS (2004)
Inkjet printing of well-defined polymer dots and arrays
BJ de Gans et al.
LANGMUIR (2004)
Cell and organ printing 1: Protein and cell printers
WC Wilson et al.
ANATOMICAL RECORD PART A-DISCOVERIES IN MOLECULAR CELLULAR AND EVOLUTIONARY BIOLOGY (2003)
Microarray fabrication with covalent attachment of DNA using Bubble Jet technology
T Okamoto et al.
NATURE BIOTECHNOLOGY (2000)
分享论文
