相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Effect of Sintering Temperature on the Physico-Mechanical Behavior of SiC Reinforced Zinc-Magnesium Based Composite
Amrendra Rai et al.
METALS AND MATERIALS INTERNATIONAL (2021)
Degradation behavior, cytotoxicity, hemolysis, and antibacterial properties of electro-deposited Zn-Cu metal foams as potential biodegradable bone implants
Xian Tong et al.
ACTA BIOMATERIALIA (2020)
Mechanical, corrosion, and biocompatibility properties of Mg-Zr-Sr-Sc alloys for biodegradable implant applications
Khurram Munir et al.
ACTA BIOMATERIALIA (2020)
Additively manufactured biodegradable porous zinc
Y. Li et al.
ACTA BIOMATERIALIA (2020)
A biodegradable Zn-1Cu-0.1Ti alloy with antibacterial properties for orthopedic applications
Jixing Lin et al.
ACTA BIOMATERIALIA (2020)
Towards revealing key factors in mechanical instability of bioabsorbable Zn-based alloys for intended vascular stenting
Ehsan Mostaed et al.
ACTA BIOMATERIALIA (2020)
Evolution of metallic cardiovascular stent materials: A comparative study among stainless steel, magnesium and zinc
Jiayin Fu et al.
BIOMATERIALS (2020)
Novel zinc/tungsten carbide nanocomposite as bioabsorbable implant
Zeyi Guan et al.
MATERIALS LETTERS (2020)
The effects of β-TCP on mechanical properties, corrosion behavior and biocompatibility of β-TCP/Zn-Mg composites
Chao Pan et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2020)
Microstructure and mechanical properties of extruded and caliber rolled biodegradable Zn-0.8Mn-0.4Ag alloy with high ductility
Hong-Ting Chen et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Effect of post-deformation annealing on the microstructure and micro-mechanical behavior of Zn-Mg hybrids processed by High-Pressure Torsion
David Hernandez-Escobar et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Microstructure evolution of a high-strength low-alloy Zn-Mn-Ca alloy through casting, hot extrusion and warm caliber rolling
Zhang-Zhi Shi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
The effects of alloying with Cu and Mn and thermal treatments on the mechanical instability of Zn-0.05Mg alloy
Morteza S. Ardakani et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Microstructure and mechanical properties of a Zn-0.5Cu alloy processed by high-pressure torsion
Wiktor Bednarczyk et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Microstructure, mechanical properties and creep behaviour of extruded Zn-xLi (x=0.1, 0.3 and 0.4) alloys for biodegradable vascular
Suming Zhu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Alloying design of biodegradable zinc as promising bone implants for load-bearing applications
Hongtao Yang et al.
NATURE COMMUNICATIONS (2020)
Novel zinc alloys for biodegradable surgical staples
Hizuru Amano et al.
World Journal of Clinical Cases (2020)
Advances in coatings on biodegradable magnesium alloys
Zheng-Zheng Yin et al.
JOURNAL OF MAGNESIUM AND ALLOYS (2020)
Graphene nanoplatelets-reinforced magnesium metal matrix nanocomposites with superior mechanical and corrosion performance for biomedical applications
Khurram Munir et al.
JOURNAL OF MAGNESIUM AND ALLOYS (2020)
In vitro and in vivo studies of Zn-Mn biodegradable metals designed for orthopedic applications
Bo Jia et al.
ACTA BIOMATERIALIA (2020)
Mechanical properties and cytocompatibility of dense and porous Zn produced by laser powder bed fusion for biodegradable implant applications
Karel Lietaert et al.
ACTA BIOMATERIALIA (2020)
An experimental investigation of the fabrication of biodegradable zinc-hydroxyapatite composite material using microwave sintering
Dayanidhi Krishana Pathak et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2020)
Advance in Antibacterial Magnesium Alloys and Surface Coatings on Magnesium Alloys: A Review
Yang Shao et al.
ACTA METALLURGICA SINICA-ENGLISH LETTERS (2020)
Characterization of Newly Developed Zinc Composite with the Content of 8 wt.% of Hydroxyapatite Particles Processed by Extrusion
Jan Pinc et al.
MATERIALS (2020)
Porous zinc scaffolds for bone tissue engineering applications: A novel additive manufacturing and casting approach
Irsalan Cockerill et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2020)
Characterization of a Zn-Ca5(PO4)3(OH) Composite with a High Content of the Hydroxyapatite Particles Prepared by the Spark Plasma Sintering Process
Jan Pinc et al.
METALS (2020)
A peritectic phase refines the microstructure and enhances Zn implants
Cijun Shuai et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
Study of mechanical, electrochemical, cellular and antibacterial response of Zn2Mg6SiC biodegradable implant
Amrendra Rai et al.
CERAMICS INTERNATIONAL (2020)
Magnesium-based composites reinforced with graphene nanoplatelets as biodegradable implant materials
Mohammad Shahin et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Adjusting comprehensive properties of biodegradable Zn-Mn alloy through solution heat-treatment
Jiang Sun et al.
MATERIALS TODAY COMMUNICATIONS (2020)
Opportunities and challenges of biodegradable Zn-based alloys
H. F. Li et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)
Extrusion of the biodegradable ZnMg0.8Ca0.2 alloy - The influence of extrusion parameters on microstructure and mechanical characteristics
Jaroslav Capek et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2020)
In vitro cytocompatibility, hemocompatibility and antibacterial properties of biodegradable Zn-Cu-Fe alloys for cardiovascular stents applications
Rui Yue et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2020)
A study of degradation behaviour and biocompatibility of Zn-Fe alloy prepared by electrodeposition
Jin He et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2020)
Highly Ductile Zn-2Fe-WC Nanocomposite as Biodegradable Material
Zeyi Guan et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2020)
Insight into role and mechanism of Li on the key aspects of biodegradable Zn-Li alloys: Microstructure evolution, mechanical properties, corrosion behavior and cytotoxicity
Zhen Li et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2020)
Enhancement in mechanical and corrosion resistance properties of a biodegradable Zn-Fe alloy through second phase refinement
Zhang-Zhi Shi et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2020)
Bioresorbable metals in cardiovascular stents: Material insights and progress
Daniel Wee Yee Toong et al.
MATERIALIA (2020)
Additively manufactured functionally graded biodegradable porous zinc
Y. Li et al.
BIOMATERIALS SCIENCE (2020)
Laser additive manufacturing of Zn porous scaffolds: Shielding gas flow, surface quality and densification
Peng Wen et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)
Mechanical properties, degradation behaviors and biocompatibility evaluation of a biodegradable Zn-Mg-Cu alloy for cardiovascular implants
Song Lin et al.
MATERIALS LETTERS (2019)
The Effects of 4%Fe on the Performance of Pure Zinc as Biodegradable Implant Material
Alon Kafri et al.
ANNALS OF BIOMEDICAL ENGINEERING (2019)
Diameter-dependent in vitro performance of biodegradable pure zinc wires for suture application
H. Guo et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)
Can zinc alloys be strengthened by grain refinement? A critical evaluation of the processing of low-alloyed binary zinc alloys using ECAP
Wiktor Bednarczyk et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Ultra-fine-grained Zn-0.5Mn alloy processed by multi-pass hot extrusion: Grain refinement mechanism and room-temperature superplasticity
Pushan Guo et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Carbon based nanomaterials for tissue engineering of bone: Building new bone on small black scaffolds: A review
Reza Eivazzadeh-Keihan et al.
JOURNAL OF ADVANCED RESEARCH (2019)
In vivo study of the efficacy, biosafety, and degradation of a zinc alloy osteosynthesis system
Xiang Wang et al.
ACTA BIOMATERIALIA (2019)
Near-eutectic Zn-Mg alloys: Interrelations of solidification thermal parameters, microstructure length scale and tensile/corrosion properties
Talita A. Vida et al.
CURRENT APPLIED PHYSICS (2019)
Laser additive manufacturing of Zn-2Al part for bone repair: Formability, microstructure and properties
Cijun Shuai et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Recent advances in biodegradation controls over Mg alloys for bone fracture management: A review
Ming-Shi Song et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)
Creep properties of biodegradable Zn-0.1Li alloy at human body temperature: implications for its durability as stents
Suming Zhu et al.
MATERIALS RESEARCH LETTERS (2019)
Challenges in the use of zinc and its alloys as biodegradable metals: Perspective from biomechanical compatibility
Guannan Li et al.
ACTA BIOMATERIALIA (2019)
Magnesium matrix nanocomposites for orthopedic applications: A review from mechanical, corrosion, and biological perspectives
Mohammad Shahin et al.
ACTA BIOMATERIALIA (2019)
Current status and perspectives of zinc-based absorbable alloys for biomedical applications
David Hernandez-Escobar et al.
ACTA BIOMATERIALIA (2019)
Influences of albumin on in vitro corrosion of pure Zn in artificial plasma
Lijun Liu et al.
CORROSION SCIENCE (2019)
Magnesium-based composites and alloys for medical applications: A review of mechanical and corrosion properties
Murad Ali et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
High-performance hot-warm rolled Zn-0.8Li alloy with nano-sized metastable precipitates and sub-micron grains for biodegradable stents
Zhen Li et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)
Influence of Mg on the mechanical properties and degradation performance of as-extruded Zn-Mg-Ca alloys: In vitro and in vivo behavior
Lijing Yang et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2019)
Effects of Ti on microstructure, mechanical properties and biodegradation behavior of Zn-Cu alloy
L. Zhang et al.
MATERIALS LETTERS (2019)
Mechanical properties and biodegradation of porous Zn-1Al alloy scaffolds
Lichen Zhao et al.
MATERIALS LETTERS (2019)
Microstructure, mechanical, corrosion properties and cytotoxicity of beta-calcium polyphosphate reinforced ZK61 magnesium alloy composite by spark plasma sintering
Zeqin Cui et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2019)
Effects of Ag, Cu or Ca addition on microstructure and comprehensive properties of biodegradable Zn-0.8Mn alloy
Zhang-Zhi Shi et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2019)
Investigation on the microstructure, mechanical properties, in vitro degradation behavior and biocompatibility of newly developed Zn-0.8%Li-(Mg, Ag) alloys for guided bone regeneration
Yu Zhang et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2019)
Determination of room-temperature superplastic asymmetry and anisotropy of Zn-0.8Ag alloy processed by ECAP
Wiktor Bednarczyk et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
The Prospects for Biodegradable Zinc in Wound Closure Applications
Jeffrey Jones D. Venezuela et al.
Advanced Healthcare Materials (2019)
Fabrication and properties of a biodegradable β-TCP/Zn-Mg biocomposite
Lu Guoliang et al.
MATERIALS RESEARCH EXPRESS (2019)
Long-term in vivo study of biodegradable Zn-Cu stent: A 2-year implantation evaluation in porcine coronary artery
Chao Zhou et al.
ACTA BIOMATERIALIA (2019)
Evolution of carbon nanotubes and their metallurgical reactions in Al-based composites in response to laser irradiation during selective laser melting
Nesma T. Aboulkhair et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Effect of CNT on microstructure, dry sliding wear and compressive mechanical properties of AZ61 magnesium alloy
Song Jeng Huang et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2019)
Reinforcing capability of multiwall carbon nanotubes in alumina ceramic hybrid nanocomposites containing zirconium oxide nanoparticles
Iftikhar Ahmad et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2019)
The structure effect of carbonaceous reinforcement on the microstructural characterization and mechanical behavior of AZ80 magnesium alloy
M. Torabi Parizi et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Systematical evolution on a Zn-Mg alloy potentially developed for biodegradable cardiovascular stents
Song Lin et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2019)
Investigation of zinc-copper alloys as potential materials for craniomaxillofacial osteosynthesis implants
Ping Li et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2019)
The influence of alloying and fabrication techniques on the mechanical properties, biodegradability and biocompatibility of zinc: A comprehensive review
J. Venezuela et al.
ACTA BIOMATERIALIA (2019)
An Overview of the Recent Developments in Metal Matrix Nanocomposites Reinforced by Graphene
Mehran Dadkhah et al.
MATERIALS (2019)
Zn-Mg Biodegradable Composite: Novel Material with Tailored Mechanical and Corrosion Properties
Jiri Kubasek et al.
MATERIALS (2019)
Corrosion behavior and biocompatibility evaluation of a novel zinc-based alloy stent in rabbit carotid artery model
Song Lin et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2019)
Evaluation of as-extruded ternary Zn-Mg-Zr alloys for biomedical implantation material: In vitro and in vivo behavior
Tiantian Ren et al.
MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION (2019)
Mechanical strengthening mechanism of Zn-Li alloy and its mini tube as potential absorbable stent material
Yilong Dai et al.
MATERIALS LETTERS (2019)
Tensile and fracture toughness behaviour of ultrafine grained Mg-4Zn-4Gd alloy processed through hot rolling followed by hot pressing
Raviraj Verma et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Zinc-Based Biomaterials for Regeneration and Therapy
Yingchao Su et al.
TRENDS IN BIOTECHNOLOGY (2019)
In Vitro Degradation of Absorbable Zinc Alloys in Artificial Urine
Sebastien Champagne et al.
MATERIALS (2019)
Enhanced Osseointegration of Zn-Mg Composites by Tuning the Release of Zn Ions with Sacrificial Mg-Rich Anode Design
Hongtao Yang et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2019)
(Fe, Mn)Zn13 phase and its core-shell structure in novel biodegradable Zn-Mn-Fe alloys
Zhang-Zhi Shi et al.
MATERIALS & DESIGN (2019)
Mechanical Strength, Biodegradation, and in Vitro and in Vivo Biocompatibility of Zn Biomaterials
Donghui Zhu et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
Selection of extraction medium influences cytotoxicity of zinc and its alloys
Ping Li et al.
ACTA BIOMATERIALIA (2019)
Fundamental Theory of Biodegradable Metals-Definition, Criteria, and Design
Yang Liu et al.
ADVANCED FUNCTIONAL MATERIALS (2019)
Design of novel Zn-Ag-Zr alloy with enhanced strength as a potential biodegradable implant material
Maria Watroba et al.
MATERIALS & DESIGN (2019)
Effects of deformation twinning on the mechanical properties of biodegradable Zn-Mg alloys
Shiyang Liu et al.
BIOACTIVE MATERIALS (2019)
Initial formation of corrosion products on pure zinc in saline solution
Yao Meng et al.
BIOACTIVE MATERIALS (2019)
Improved blood compatibility and cyto-compatibility of Zn-1Mg via plasma electrolytic oxidation
Yinying Sheng et al.
MATERIALIA (2019)
Multi-walled Carbon Nanotubes Reinforced-Based Magnesium Metal Matrix Composites Prepared by Powder Metallurgy
M. Handayani et al.
INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS FOR BETTER FUTURE 2018 (2019)
Bibliographic review on the state of the art of strontium and zinc based regenerative therapies. Recent developments and clinical applications
Mirta Jimenez et al.
JOURNAL OF MATERIALS CHEMISTRY B (2019)
Effect of graphene dispersion and interfacial bonding on the mechanical properties of metal matrix composites: An overview
Hanieh Ghodrati et al.
FLATCHEM (2019)
Carbon Nanotubes and Graphene as Nanoreinforcements in Metallic Biomaterials: a Review
Khurram S. Munir et al.
ADVANCED BIOSYSTEMS (2019)
Evaluation of wrought Zn-Al alloys (1, 3, and 5 wt % Al) through mechanical and in vivo testing for stent applications
Patrick K. Bowen et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2018)
In Vitro and in Vivo Studies on Biomedical Magnesium Low-Alloying with Elements Gadolinium and Zinc for Orthopedic Implant Applications
Dong Bian et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
In vitro and in vivo studies on zinc-hydroxyapatite composites as novel biodegradable metal matrix composite for orthopedic applications
Hongtao Yang et al.
ACTA BIOMATERIALIA (2018)
Zinc-based alloys for degradable vascular scent applications
Ehsan Mostaed et al.
ACTA BIOMATERIALIA (2018)
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Tuan D. Ngo et al.
COMPOSITES PART B-ENGINEERING (2018)
Mechanical Characteristics, In Vitro Degradation, Cytotoxicity, and Antibacterial Evaluation of Zn-4.0Ag Alloy as a Biodegradable Material
Ping Li et al.
INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2018)
Characterization of nanostructured biodegradable Zn-Mn alloy synthesized by mechanical alloying
P. Sotoudeh Bagha et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Effect of cumulative strain on the microstructural and mechanical properties of Zn-0.02 wt%Mg alloy wires during room-temperature drawing process
Liqing Wang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Fabrication of Zinc-Tungsten Carbide Nanocomposite Using Cold Compaction Followed by Melting
Injoo Hwang et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2018)
Densification behavior of pure Zn metal parts produced by selective laser melting for manufacturing biodegradable implants
Peng Wen et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)
Initial formation of corrosion products on pure zinc in simulated body fluid
Lijun Liu et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2018)
Indirectly extruded biodegradable Zn-0.05wt%Mg alloy with improved strength and ductility: In vitro and in vivo studies
Chi Xiao et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2018)
Exfoliation corrosion of extruded Mg-Li-Ca alloy
Zi-You Ding et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2018)
Fabrication and characterization of novel biodegradable Zn-Mn-Cu alloys
Zhang-Zhi Shi et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2018)
In vivo performances of pure Zn and Zn-Fe alloy as biodegradable implants
Alon Kafri et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2018)
Effects of alumina nanoparticles on the microstructure, strength and wear resistance of poly(methyl methacrylate)-based nanocomposites prepared by friction stir processing
Hamed Aghajani Derazkola et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2018)
A combined strategy to enhance the properties of Zn by laser rapid solidification and laser alloying
Youwen Yang et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2018)
Mechanical properties of magnesium alloys for medical application: A review
Junxiu Chen et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2018)
Synthesis of biodegradable Zn-based scaffolds using NaCl templates: Relationship between porosity, compressive properties and degradation behavior
Yi Hou et al.
MATERIALS CHARACTERIZATION (2018)
Effect of zirconium microaddition on the microstructure and mechanical properties of Zn-Zr alloys
Maria Watroba et al.
MATERIALS CHARACTERIZATION (2018)
Preparation and characterization of porous zinc prepared by spark plasma sintering as a material for biodegradable scaffolds
Jaroslav Capek et al.
MATERIALS CHEMISTRY AND PHYSICS (2018)
Effects of Ca concentration on degradation behavior of Zn-x Ca alloys in Hank's solution
Yanlong Zou et al.
MATERIALS LETTERS (2018)
A new approach to plastic deformation of biodegradable zinc alloy with magnesium and its effect on microstructure and mechanical properties
A. Jarzebska et al.
MATERIALS LETTERS (2018)
Novel high-strength, low-alloys Zn-Mg (< 0.1 wt% Mg) and their arterial biodegradation
Hualan Jin et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2018)
Additive manufacturing of multi-material structures
Amit Bandyopadhyay et al.
MATERIALS SCIENCE & ENGINEERING R-REPORTS (2018)
Achieving room temperature superplasticity in the Zn-0.5Cu alloy processed via equal channel angular pressing
Wiktor Bednarczyk et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Tailoring microstructure, tensile properties and fracture process via transient directional solidification of Zn-Sn alloys
Washington L. R. Santos et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
A review of powder additive manufacturing processes for metallic biomaterials
W. S. W. Harun et al.
POWDER TECHNOLOGY (2018)
Additive manufacturing of biomaterials
Susmita Bose et al.
PROGRESS IN MATERIALS SCIENCE (2018)
A Review on Graphene-Based Nanomaterials in Biomedical Applications and Risks in Environment and Health
Thabitha P. Dasari Shareena et al.
NANO-MICRO LETTERS (2018)
The Suitability of Zn-1.3% Fe Alloy as a Biodegradable Implant Material
Alon Kafri et al.
METALS (2018)
A Review on Graphene-Based Nanomaterials in Biomedical Applications and Risks in Environment and Health
Thabitha P. Dasari Shareena et al.
NANO-MICRO LETTERS (2018)
Laser additive manufacturing of Zn metal parts for biodegradable applications: Processing, formation quality and mechanical properties
Peng Wen et al.
MATERIALS & DESIGN (2018)
Microalloyed Zn-Mn alloys: From extremely brittle to extraordinarily ductile at room temperature
Zhang-Zhi Shi et al.
MATERIALS & DESIGN (2018)
Advances in functionalized polymer coatings on biodegradable magnesium alloys - A review
Ling-Yu Li et al.
ACTA BIOMATERIALIA (2018)
Fabrication and properties of porous Zn-Ag alloy scaffolds as biodegradable materials
Yu Xie et al.
MATERIALS CHEMISTRY AND PHYSICS (2018)
Synthesis of highly dense and vertically aligned array of SWCNTs using a catalyst barrier layer: High performance field emitters for devices
Shama Parveen et al.
PHYSICA B-CONDENSED MATTER (2018)
Biomedical Applications of Silver Nanoparticles: An Up-to-Date Overview
Alexandra-Cristina Burdusel et al.
NANOMATERIALS (2018)
Degradation Rates of Pure Zinc, Magnesium, and Magnesium Alloys Measured by Volume Loss, Mass Loss, and Hydrogen Evolution
Lumei Liu et al.
APPLIED SCIENCES-BASEL (2018)
Microstructure, mechanical properties, biocompatibility, and in vitro corrosion and degradation behavior of a new Zn-5Ge alloy for biodegradable implant materials
Xian Tong et al.
ACTA BIOMATERIALIA (2018)
Effects of the Intermetallic Phases on Microstructure and Properties of Biodegradable Magnesium Matrix and Zinc Matrix Prepared by Powder Metallurgy
Yang Yan et al.
MATERIALS TRANSACTIONS (2018)
Interdependencies between graphitization of carbon nanotubes and strengthening mechanisms in titanium matrix composites
Khurram S. Munir et al.
MATERIALIA (2018)
Updates on the research and development of absorbable metals for biomedical applications
Hendra Hermawan
PROGRESS IN BIOMATERIALS (2018)
Selective laser melting of Zn-Ag alloys for bone repair: microstructure, mechanical properties and degradation behaviour
Cijun Shuai et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2018)
A review on the exploitation of biodegradable magnesium-based composites for medical applications
Jingxin Yang et al.
BIOMEDICAL MATERIALS (2018)
Review of magnesium-based biomaterials and their applications
Nurettin Sezer et al.
JOURNAL OF MAGNESIUM AND ALLOYS (2018)
Directionally solidified dilute Zn-Mg alloys: Correlation between microstructure and corrosion properties
Talita A. Vida et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
The effects of Zn segregation and microstructure length scale on the corrosion behavior of a directionally solidified Mg-25 wt.%Zn alloy
Nathalia C. Verissimo et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Study of corrosion in biocompatible metals for implants: A review
N. S. Manam et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Fabrication of cellular Zn-Mg alloy foam by gas release reaction via powder metallurgical approach
Donghui Yang et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2017)
Evaluation of biodegradable Zn-1% Mg and Zn-1% Mg-0.5% Ca alloys for biomedical applications
Galit Katarivas Levy et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2017)
Potential biodegradable Zn-Cu binary alloys developed for cardiovascular implant applications
Zibo Tang et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2017)
Aluminium in brain tissue in familial Alzheimer's disease
Ambreen Mirza et al.
JOURNAL OF TRACE ELEMENTS IN MEDICINE AND BIOLOGY (2017)
Microstructure, mechanical properties and in vitro degradation behavior of novel Zn-Cu-Fe alloys
Rui Yue et al.
MATERIALS CHARACTERIZATION (2017)
Zn-Li alloy after extrusion and drawing: Structural, mechanical characterization, and biodegradation in abdominal aorta of rat
Shan Zhao et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2017)
Fabrication, mechanical properties and in vitro degradation behavior of newly developed Zn-Ag alloys for degradable implant applications
M. Sikora-Jasinska et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2017)
Fabrication of biodegradable Zn-Al-Mg alloy: Mechanical properties, corrosion behavior, cytotoxicity and antibacterial activities
H. R. Bakhsheshi-Rad et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2017)
Abnormal effect of Mn addition on the mechanical properties of as-extruded Zn alloys
Shineng Sun et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Structural Characteristics and In Vitro Biodegradation of a Novel Zn-Li Alloy Prepared by Induction Melting and Hot Rolling
Shan Zhao et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2017)
Diode-based additive manufacturing of metals using an optically-addressable light valve
Manyalibo J. Matthews et al.
OPTICS EXPRESS (2017)
Processability of pure Zn and pure Fe by SLM for biodegradable metallic implant manufacturing
Marco Montani et al.
RAPID PROTOTYPING JOURNAL (2017)
Microstructure, Mechanical Properties and Fracture Behavior of As-Extruded Zn-Mg Binary Alloys
Li-Qing Wang et al.
ACTA METALLURGICA SINICA-ENGLISH LETTERS (2017)
Thermal Characteristics, Mechanical Properties, In Vitro Degradation and Cytotoxicity of Novel Biodegradable Zn-Al-Mg and Zn-Al-Mg-xBi Alloys
H. R. Bakhsheshi-Rad et al.
ACTA METALLURGICA SINICA-ENGLISH LETTERS (2017)
Evolution of the in vitro degradation of Zn-Mg alloys under simulated physiological conditions
Marta M. Alves et al.
RSC ADVANCES (2017)
The Prospects of Zinc as a Structural Material for Biodegradable Implants-A Review Paper
Galit Katarivas Levy et al.
METALS (2017)
Preparation and Characterization of Zinc Materials Prepared by Powder Metallurgy
Michaela Krystynova et al.
METALS (2017)
Design and characterizations of novel biodegradable Zn-Cu-Mg alloys for potential biodegradable implants
Zibo Tang et al.
MATERIALS & DESIGN (2017)
Biocompatibility and biodegradation studies of a commercial zinc alloy for temporary mini-implant applications
M. Bobby Kannan et al.
SCIENTIFIC REPORTS (2017)
Current status on clinical applications of magnesium-based orthopaedic implants: A review from clinical translational perspective
Dewei Zhao et al.
BIOMATERIALS (2017)
Evolution of the degradation mechanism of pure zinc stent in the one-year study of rabbit abdominal aorta model
Hongtao Yang et al.
BIOMATERIALS (2017)
Study on the Mg-Li-Zn ternary alloy system with improved mechanical properties, good degradation performance and different responses to cells
Yang Liu et al.
ACTA BIOMATERIALIA (2017)
Processing of Zn-3Mg alloy by equal channel angular pressing for biodegradable metal implants
Murtala Sule Dambatta et al.
JOURNAL OF KING SAUD UNIVERSITY SCIENCE (2017)
Corrosion behavior of magnesium-graphene composites in sodium chloride solutions
Muhammad Rashad et al.
JOURNAL OF MAGNESIUM AND ALLOYS (2017)
Insight of magnesium alloys and composites for orthopedic implant applications - a review
R. Radha et al.
JOURNAL OF MAGNESIUM AND ALLOYS (2017)
Biological Responses and Mechanisms of Human Bone Marrow Mesenchymal Stem Cells to Zn and Mg Biomaterials
Donghui Zhu et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
Long-term surveillance of zinc implant in murine artery: Surprisingly steady biocorrosion rate
Adam J. Drelich et al.
ACTA BIOMATERIALIA (2017)
Degradation of zinc in saline solutions, plasma, and whole blood
Karin Torne et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2016)
An assessment of ultra fine grained 316L stainless steel for implant applications
Sachin Vijay Muley et al.
ACTA BIOMATERIALIA (2016)
The biological inorganic chemistry of zinc ions
Artur Krezel et al.
ARCHIVES OF BIOCHEMISTRY AND BIOPHYSICS (2016)
Topological design and additive manufacturing of porous metals for bone scaffolds and orthopaedic implants: A review
Xiaojian Wang et al.
BIOMATERIALS (2016)
Comparative corrosion behavior of Zn with Fe and Mg in the course of immersion degradation in phosphate buffered saline
Yingqi Chen et al.
CORROSION SCIENCE (2016)
Corrosion and passivation of magnesium alloys
Fuyong Cao et al.
CORROSION SCIENCE (2016)
Deterioration of the Strong sp2 Carbon Network in Carbon Nanotubes during the Mechanical Dispersion ProcessingA Review
Khurram S. Munir et al.
CRITICAL REVIEWS IN SOLID STATE AND MATERIALS SCIENCES (2016)
Zirconia in biomedical applications
Yen-Wei Chen et al.
EXPERT REVIEW OF MEDICAL DEVICES (2016)
Microstructure and mechanical properties of the micrograined hypoeutectic Zn-Mg alloy
J. Kubasek et al.
INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS (2016)
Mechanical, electrochemical and biocompatibility evaluation of AZ91D magnesium alloy as a biomaterial
Aydin Tahmasebifar et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2016)
Interconnection of Zn content, macrosegregation, dendritic growth, nature of intermetallics and hardness in directionally solidified Mg-Zn alloys
Nathalia C. Verissimo et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2016)
Effects of alloying elements (Ca and Sr) on microstructure, mechanical property and in vitro corrosion behavior of biodegradable Zn-1.5Mg alloy
Xiwei Liu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2016)
In Vitro Evaluation of the Feasibility of Commercial Zn Alloys as Biodegradable Metals
C. Wang et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2016)
Processing of a Novel Zn Alloy Micro-Tube for Biodegradable Vascular Stent Application
Chang Wang et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2016)
Bioactive glasses: Special applications outside the skeletal system
Francesco Baino et al.
JOURNAL OF NON-CRYSTALLINE SOLIDS (2016)
Novel Zn-based alloys for biodegradable stent applications: Design, development and in vitro degradation
E. Mostaed et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2016)
Dietary copper and human health: Current evidence and unresolved issues
Muriel Bost et al.
JOURNAL OF TRACE ELEMENTS IN MEDICINE AND BIOLOGY (2016)
Microstructure, mechanical properties, in vitro degradation behavior and hemocompatibility of novel Zn-Mg-Sr alloys as biodegradable metals
Xiwei Liu et al.
MATERIALS LETTERS (2016)
Biodegradable magnesium alloys for orthopaedic applications: A review on corrosion, biocompatibility and surface modifications
Sankalp Agarwal et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2016)
In vitro and in vivo studies of biodegradable fine grained AZ31 magnesium alloy produced by equal channel angular pressing
B. Ratna Sunil et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2016)
Influence of surface pre-treatment on the cytocompatibility of a novel biodegradable ZnMg alloy
Eva Jablonska et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2016)
Research on a Zn-Cu alloy as a biodegradable material for potential vascular stents application
Jialin Niu et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2016)
Structure, mechanical characteristics and in vitro degradation, cytotoxicity, genotoxicity and mutagenicity of novel biodegradable Zn-Mg alloys
J. Kubasek et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2016)
Spark plasma sintering and age hardening of an Al-Zn-Mg alloy powder blend
S. Rudinsky et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Exploring mechanical behavior of Mg-6Zn alloy reinforced with graphene nanoplatelets
Muhammad Rashad et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Comparison of the sliding wear of a novel Zn alloy with that of two commercial Zn alloys against bearing steel and leaded brass
Annalisa Pola et al.
WEAR (2016)
Mechanical properties, in vitro degradation behavior, hemocompatibility and cytotoxicity evaluation of Zn-1.2Mg alloy for biodegradable implants
Chao Shen et al.
RSC ADVANCES (2016)
Biodegradable Metals for Cardiovascular Stents: from Clinical Concerns to Recent Zn-Alloys
Patrick K. Bowen et al.
ADVANCED HEALTHCARE MATERIALS (2016)
In Vitro Cytotoxicity, Adhesion, and Proliferation of Human Vascular Cells Exposed to Zinc
Emily R. Shearier et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2016)
Corrosion Characteristics Dictate the Long-Term Inflammatory Profile of Degradable Zinc Arterial Implants
Roger J. Guillory et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2016)
Micro-alloying with Mn in Zn-Mg alloy for future biodegradable metals application
Xiwei Liu et al.
MATERIALS & DESIGN (2016)
Evaluation of mechanical and wear properties of Ti-xNb-7Fe alloys designed for biomedical applications
S. Ehtemam-Haghighi et al.
MATERIALS & DESIGN (2016)
In Vitro Cytotoxicity, Adhesion, and Proliferation of Human Vascular Cells Exposed to Zinc
Emily R. Shearier et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2016)
Corrosion Characteristics Dictate the Long-Term Inflammatory Profile of Degradable Zinc Arterial Implants
Roger J. Guillory et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2016)
Bioresorbable zinc hydroxyapatite guided bone regeneration membrane for bone regeneration
Joshua Chou et al.
CLINICAL ORAL IMPLANTS RESEARCH (2016)
In vivo study of magnesium plate and screw degradation and bone fracture healing
Amy Chaya et al.
ACTA BIOMATERIALIA (2015)
Mg and Mg alloys: How comparable are in vitro and in vivo corrosion rates? A review
Adela Helvia Martinez Sanchez et al.
ACTA BIOMATERIALIA (2015)
Review of Recent Developments in the Field of Magnesium Corrosion
Andrej Atrens et al.
ADVANCED ENGINEERING MATERIALS (2015)
In vitro biodegradation behavior, mechanical properties, and cytotoxicity of biodegradable Zn-Mg alloy
Haibo Gong et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2015)
Iron and iron-based alloys for temporary cardiovascular applications
A. Francis et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2015)
In vitro investigation of ultra-pure Zn and its mini-tube as potential bioabsorbable stent material
Xiwei Liu et al.
MATERIALS LETTERS (2015)
Metallic zinc exhibits optimal biocompatibility for bioabsorbable endovascular stents
Patrick K. Bowen et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2015)
Metallic implant biomaterials
Qizhi Chen et al.
MATERIALS SCIENCE & ENGINEERING R-REPORTS (2015)
Effect of equal-channel angular pressing on room temperature superplasticity of quasi-single phase Zn-0.3Al alloy
M. Demirtas et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
In vitro degradation and cell viability assessment of Zn-3Mg alloy for biodegradable bone implants
M. S. Dambatta et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE (2015)
Development of biodegradable Zn-1X binary alloys with nutrient alloying elements Mg, Ca and Sr
H. F. Li et al.
SCIENTIFIC REPORTS (2015)
Recent Advances in Biodegradable Metals for Medical Sutures: A Critical Review
Jan-Marten Seitz et al.
ADVANCED HEALTHCARE MATERIALS (2015)
Endothelial Cellular Responses to Biodegradable Metal Zinc
Jun Ma et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2015)
Design and characterizations of novel biodegradable ternary Zn-based alloys with IIA nutrient alloying elements Mg, Ca and Sr
Huafang Li et al.
MATERIALS & DESIGN (2015)
Influence of thermal treatment on microstructure, mechanical and degradation properties of Zn-3Mg alloy as potential biodegradable implant material
M. S. Dambatta et al.
MATERIALS & DESIGN (2015)
Endothelial Cellular Responses to Biodegradable Metal Zinc
Jun Ma et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2015)
Implant biomaterials: A comprehensive review
Monika Saini et al.
WORLD JOURNAL OF CLINICAL CASES (2015)
Rates of in vivo (arterial) and in vitro biocorrosion for pure magnesium
Patrick K. Bowen et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2015)
Development of magnesium-graphene nanoplatelets composite
Muhammad Rashad et al.
JOURNAL OF COMPOSITE MATERIALS (2015)
Recent advances on the development of magnesium alloys for biodegradable implants
Yongjun Chen et al.
ACTA BIOMATERIALIA (2014)
Microstructure, corrosion, and mechanical properties of compression-molded zinc-nanodiamond composites
Miao Yu et al.
JOURNAL OF MATERIALS SCIENCE (2014)
The effect of silver on wear behaviour of zinc-aluminium-based ZA-12 alloy produced by gravity casting
Huseying Sevik
MATERIALS CHARACTERIZATION (2014)
In vitro and in vivo degradation evaluation of novel iron-bioceramic composites for bone implant applications
M. F. Ulum et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2014)
Biodegradable metals
Y. F. Zheng et al.
MATERIALS SCIENCE & ENGINEERING R-REPORTS (2014)
Silver as a Bactericidal Coating for Biomedical Implants
William R. Fordham et al.
SURFACE & COATINGS TECHNOLOGY (2014)
Friction and Wear Properties of Zn-25Al-Based Bearing Alloys
Temel Savaskan et al.
TRIBOLOGY TRANSACTIONS (2014)
Zinc Exhibits Ideal Physiological Corrosion Behavior for Bioabsorbable Stents
Patrick K. Bowen et al.
ADVANCED MATERIALS (2013)
Trace elements and bone health
Ivana Zofkova et al.
CLINICAL CHEMISTRY AND LABORATORY MEDICINE (2013)
Potential of cold gas dynamic spray as additive manufacturing technology
A. Sova et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2013)
Novel Magnesium Alloys Developed for Biomedical Application: A Review
Nan Li et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2013)
Comparative in vitro Study on Pure Metals (Fe, Mn, Mg, Zn and W) as Biodegradable Metals
J. Cheng et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2013)
On the relation between the microstructure and the mechanical behavior of pure Zn processed by high pressure torsion
B. Srinivasarao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
The effect of Equal Channel Angular Pressing process on the microstructure of AZ31 Mg alloy strip shaped specimens
S. M. Arab et al.
JOURNAL OF MAGNESIUM AND ALLOYS (2013)
Mg-Zr-Sr alloys as biodegradable implant materials
Yuncang Li et al.
ACTA BIOMATERIALIA (2012)
A new look at biomedical Ti-based shape memory alloys
Arne Biesiekierski et al.
ACTA BIOMATERIALIA (2012)
Effects of chromium and nitrogen content on the microstructures and mechanical properties of as-cast Co-Cr-Mo alloys for dental applications
Keita Yoda et al.
ACTA BIOMATERIALIA (2012)
Corrosion of Zinc as a Function of pH
S. Thomas et al.
CORROSION (2012)
A simplified in vivo approach for evaluating the bioabsorbable behavior of candidate stent materials
Daniel Pierson et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2012)
Corrosion and wear resistance of hypoeutectic Zn-Al alloys as a function of structural features
A. E. Ares et al.
MATERIALS CHEMISTRY AND PHYSICS (2012)
Mechanical and corrosion properties of newly developed biodegradable Zn-based alloys for bone fixation
D. Vojtech et al.
ACTA BIOMATERIALIA (2011)
Perspectives for the use of silver nanoparticles in dental practice
Rene Garcia-Contreras et al.
INTERNATIONAL DENTAL JOURNAL (2011)
Metal-on-metal: history, state of the art (2010)
Philippe Triclot
INTERNATIONAL ORTHOPAEDICS (2011)
Aluminium in the human brain
Christopher Exley et al.
MONATSHEFTE FUR CHEMIE (2011)
Recent progress in inorganic and composite coatings with bactericidal capability for orthopaedic applications
A. Simchi et al.
NANOMEDICINE-NANOTECHNOLOGY BIOLOGY AND MEDICINE (2011)
Significance of homologous temperature in softening behavior and grain size of pure metals processed by high-pressure torsion
Kaveh Edalati et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Microstructure, cytotoxicity and corrosion of powder-metallurgical iron alloys for biodegradable bone replacement materials
Bernd Wegener et al.
MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS (2011)
Corrosion mechanism applicable to biodegradable magnesium implants
Andrej Atrens et al.
MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS (2011)
Biodegradable Mg and Mg alloys: Corrosion and biocompatibility
Sannakaisa Virtanen
MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS (2011)
Biodegradable Behaviors of Mg-6%Zn-5%Hydroxyapatite Biomaterial
Jun Zhao et al.
ADVANCED MATERIALS, PTS 1-4 (2011)
The history of biodegradable magnesium implants: A review
Frank Witte
ACTA BIOMATERIALIA (2010)
Design strategy for biodegradable Fe-based alloys for medical applications
Michael Schinhammer et al.
ACTA BIOMATERIALIA (2010)
Research on an Mg-Zn alloy as a degradable biomaterial
Shaoxiang Zhang et al.
ACTA BIOMATERIALIA (2010)
Toughening mechanisms in iron-containing hydroxyapatite/titanium composites
Q. Chang et al.
BIOMATERIALS (2010)
Biocompatibility and mechanical properties of diamond-like coatings on cobalt-chromium-molybdenum steel and titanium-aluminum-vanadium biomedical alloys
C. Hinuber et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2010)
A novel route for processing cobalt-chromium-molybdenum orthopaedic alloys
Bhairav Patel et al.
JOURNAL OF THE ROYAL SOCIETY INTERFACE (2010)
The Essential Toxin: Impact of Zinc on Human Health
Laura M. Plum et al.
INTERNATIONAL JOURNAL OF ENVIRONMENTAL RESEARCH AND PUBLIC HEALTH (2010)
Electrochemical stability and corrosion resistance of Ti-Mo alloys for biomedical applications
N. T. C. Oliveira et al.
ACTA BIOMATERIALIA (2009)
Review of Lithium Effects on Brain and Blood
Wise Young
CELL TRANSPLANTATION (2009)
Carbon nanotubes: biomaterial applications
Naoto Saito et al.
CHEMICAL SOCIETY REVIEWS (2009)
Degradable biomaterials based on magnesium corrosion
Frank Witte et al.
CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE (2009)
Elastic and frictional properties of graphene
Changgu Lee et al.
PHYSICA STATUS SOLIDI B-BASIC SOLID STATE PHYSICS (2009)
History of the Medical Use of Silver
J. Wesley Alexander
SURGICAL INFECTIONS (2009)
Toxicity of lithium to humans and the environment - A literature review
Hal Aral et al.
ECOTOXICOLOGY AND ENVIRONMENTAL SAFETY (2008)
Preliminary experience with biodegradable implants for fracture fixation
Mandeep S. Dhillon et al.
INDIAN JOURNAL OF ORTHOPAEDICS (2008)
Superior thermal conductivity of single-layer graphene
Alexander A. Balandin et al.
NANO LETTERS (2008)
Measurement of the elastic properties and intrinsic strength of monolayer graphene
Changgu Lee et al.
SCIENCE (2008)
Ultrahigh electron mobility in suspended graphene
K. I. Bolotin et al.
SOLID STATE COMMUNICATIONS (2008)
Carbon nanotube coatings on Bioglass-Based tissue engnineering scaffolds
Aldo R. Boccaccini et al.
ADVANCED FUNCTIONAL MATERIALS (2007)
Properties and deformation behaviourOf Mg-Y2O3 nanocomposites
C. S. Goh et al.
ACTA MATERIALIA (2007)
Biodegradable magnesium-hydroxyapatite metal matrix composites
Frank Witte et al.
BIOMATERIALS (2007)
Long-term atmospheric corrosion of zinc
D. de la Fuente et al.
CORROSION SCIENCE (2007)
Comparison of the wear properties of modified ZA-8 alloys and conventional bearing bronze
Ahmet Turk et al.
MATERIALS & DESIGN (2007)
Coronary stents: A materials perspective
Gopinath Mani et al.
BIOMATERIALS (2007)
Long-term biocompatibility of a corrodible peripheral iron stent in the porcine descending aorta
Matthias Peuster et al.
BIOMATERIALS (2006)
In vitro corrosion behavior of multilayered Ti/TiN coating on biomedical AISI 316L stainless steel
CL Liu et al.
SURFACE & COATINGS TECHNOLOGY (2006)
Magnesium and its alloys as orthopedic biomaterials: A review
MP Staiger et al.
BIOMATERIALS (2006)
The effect of electric field and pressure on the synthesis and consolidation of materials: A review of the spark plasma sintering method
ZA Munir et al.
JOURNAL OF MATERIALS SCIENCE (2006)
Mechanical properties of metals for biomedical applications using powder metallurgy process: A review
Montasser Marasy Dewidar et al.
METALS AND MATERIALS INTERNATIONAL (2006)
The neurobiology of zinc in health and disease
CJ Frederickson et al.
NATURE REVIEWS NEUROSCIENCE (2005)
Interactions between excessive manganese exposures and dietary iron-deficiency in neurodegeneration
KM Erikson et al.
ENVIRONMENTAL TOXICOLOGY AND PHARMACOLOGY (2005)
Hot tensile and fatigue behaviour of zinc-aluminum alloys produced by gravity and squeeze casting
F Cay et al.
MATERIALS & DESIGN (2005)
Effect of different Al contents on the microstructure, tensile and wear properties of Zn-based alloy
MT Abou El-Khair et al.
MATERIALS LETTERS (2004)
Effect of pass strain on grain refinement in 7475 Al alloy during hot multidirectional forging
O Sitdikov et al.
MATERIALS TRANSACTIONS (2004)
Tensile properties of nanometric Al2O3 particulate-reinforced aluminum matrix composites
YC Kang et al.
MATERIALS CHEMISTRY AND PHYSICS (2004)
Possible roles of magnesium on the immune system
M Tam et al.
EUROPEAN JOURNAL OF CLINICAL NUTRITION (2003)
Effect of copper content on the mechanical and tribological properties of ZnAl27-based alloys
T Savaskan et al.
TRIBOLOGY LETTERS (2003)
Direct mechanical measurement of the tensile strength and elastic modulus of multiwalled carbon nanotubes
BG Demczyk et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2002)
Dry sliding friction and wear properties of zinc-based alloys
G Pürçek et al.
WEAR (2002)
Hydroxylapatite with substituted magnesium, zinc, cadmium, and yttrium. II. Mechanisms of osteoblast adhesion
TJ Webster et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH (2002)
Recent metallic materials for biomedical applications
M Niinomi
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2002)
Mechanical properties of cancellous bone in the human mandibular condyle are anisotropic
EBW Giesen et al.
JOURNAL OF BIOMECHANICS (2001)
Tensile loading of ropes of single wall carbon nanotubes and their mechanical properties
MF Yu et al.
PHYSICAL REVIEW LETTERS (2000)
Squeeze casting: an overview
MR Ghomashchi et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2000)
Strength and breaking mechanism of multiwalled carbon nanotubes under tensile load
MF Yu et al.
SCIENCE (2000)