相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Induction Sintering of Silver Nanoparticle Inks on Polyimide Substrates
Hong Wei Tan et al.
ADVANCED MATERIALS TECHNOLOGIES (2020)
Design of compliant mechanisms using continuum topology optimization: A review
Benliang Zhu et al.
MECHANISM AND MACHINE THEORY (2020)
Microstructure evolution and mechanical property response via 3D printing parameter development of Al-Sc alloy
C. N. Kuo et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2020)
Optimal Design of a Compliant Constant-Force Mechanism to Deliver a Nearly Constant Output Force Over a Range of Input Displacements
Chih-Hsing Liu et al.
SOFT ROBOTICS (2020)
Optimal Design of a Motor-Driven Three-Finger Soft Robotic Gripper
Chih-Hsing Liu et al.
IEEE-ASME TRANSACTIONS ON MECHATRONICS (2020)
Topology and Size-Shape Optimization of an Adaptive Compliant Gripper with High Mechanical Advantage for Grasping Irregular Objects
Chih-Hsing Liu et al.
ROBOTICA (2019)
Metallic Nanoparticle Inks for 3D Printing of Electronics
Hong Wei Tan et al.
ADVANCED ELECTRONIC MATERIALS (2019)
A viscoelastic constitutive relation for the rate-dependent mechanical behavior of rubber-like elastomers based on thermodynamic theory
Hui Guo et al.
MATERIALS & DESIGN (2019)
Fabrication and modeling of dielectric elastomer soft actuator with 3D printed thermoplastic frame
Fanghao Zhou et al.
SENSORS AND ACTUATORS A-PHYSICAL (2019)
Influence of infill properties on flexural rigidity of 3D-printed structural members
J. H. Porter et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2019)
Printability and fire performance of a developed 3D printable fibre reinforced cementitious composites under elevated temperatures
Yiwei Weng et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2019)
Topology Synthesis and Optimal Design of an Adaptive Compliant Gripper to Maximize Output Displacement
Chih-Hsing Liu et al.
JOURNAL OF INTELLIGENT & ROBOTIC SYSTEMS (2018)
Modeling temperature and residual stress fields in selective laser melting
Yingli Li et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2018)
Topology Optimization and Prototype of a Three-Dimensional Printed Compliant Finger for Grasping Vulnerable Objects With Size and Shape Variations
Chih-Hsing Liu et al.
JOURNAL OF MECHANISMS AND ROBOTICS-TRANSACTIONS OF THE ASME (2018)
Optimal Design of a Soft Robotic Gripper for Grasping Unknown Objects
Chih-Hsing Liu et al.
SOFT ROBOTICS (2018)
Determination of the hyper-viscoelastic model parameters of open-cell polymer foams and rubber-like materials with high accuracy
Balint Fazekas et al.
MATERIALS & DESIGN (2018)
Tactile Sensing Applied to the Universal Gripper Using Conductive Thermoplastic Elastomer
Josie Hughes et al.
SOFT ROBOTICS (2018)
Effect of SiC/Al2O3 particle size reinforcement in recycled LDPE matrix on mechanical properties of FDM feed stock filament
Piyush Bedi et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2018)
Detailed tyre FE modelling with multistage validation for dynamic analysis
Pawel Baranowski et al.
MATERIALS & DESIGN (2016)
The effects of tyre material and structure properties on relaxation length using finite element method
Chongfeng Wei et al.
MATERIALS & DESIGN (2016)
Numerical and experimental analysis of the automated demolding process for PDMS microfluidic devices with high-aspect ratio micropillars
Chih-Hsing Liu et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2015)
Soft robotics: a bioinspired evolution in robotics
Sangbae Kim et al.
TRENDS IN BIOTECHNOLOGY (2013)
Explicit dynamic finite element analysis of an automated grasping process using highly damped compliant fingers
Kok-Meng Lee et al.
COMPUTERS & MATHEMATICS WITH APPLICATIONS (2012)
Shape optimization of rubber isolators in automotive cooling modules for the maximization of vibration isolation and fatigue life
C. -H. Park et al.
INTERNATIONAL JOURNAL OF AUTOMOTIVE TECHNOLOGY (2012)
A Comparison Among Neo-Hookean Model, Mooney-Rivlin Model, and Ogden Model for Chloroprene Rubber
Beomkeun Kim et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2012)
Fatigue life prediction of a rubber mount based on test of material properties and finite element analysis
Qian Li et al.
ENGINEERING FAILURE ANALYSIS (2009)
Finite element analysis and structure optimization for improving the fatigue life of rubber mounts
Jiancai Zhao et al.
JOURNAL OF MACROMOLECULAR SCIENCE PART A-PURE AND APPLIED CHEMISTRY (2008)
A study on the material properties and fatigue life prediction of natural rubber component
Chang-Su Woo et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Fatigue failure analysis of anti-vibration rubber spring
RK Luo et al.
ENGINEERING FAILURE ANALYSIS (2006)
Some results for generalized neo-Hookean elastic materials
A Wineman
INTERNATIONAL JOURNAL OF NON-LINEAR MECHANICS (2005)
Fatigue life estimation of an engine rubber mount
WB Kim et al.
INTERNATIONAL JOURNAL OF FATIGUE (2004)
Fitting hyperelastic models to experimental data
RW Ogden et al.
COMPUTATIONAL MECHANICS (2004)