相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Superior tensile properties of 1%C-CoCrFeMnNi high-entropy alloy additively manufactured by selective laser melting
Jeong Min Park et al.
MATERIALS RESEARCH LETTERS (2020)
High cycle fatigue behavior of a low carbon alloy steel: The influence of vacuum carburizing treatment
Na Xiao et al.
ENGINEERING FAILURE ANALYSIS (2020)
Quantitative multiscale correlative microstructure analysis of additive manufacturing of stainless steel 316L processed by selective laser melting
Matjaz Godec et al.
MATERIALS CHARACTERIZATION (2020)
Excellent high cyclic fatigue properties of a novel ultrafine-grained medium entropy alloy
Shivakant Shukla et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Yield strength increase of a CoCrNi medium entropy alloy by interstitial nitrogen doping at maintained ductility
Igor Moravcik et al.
SCRIPTA MATERIALIA (2020)
High entropy alloys: A focused review of mechanical properties and deformation mechanisms
E. P. George et al.
ACTA MATERIALIA (2020)
A novel cobalt-free FeMnCrNi medium-entropy alloy with exceptional yield strength and ductility at cryogenic temperature
B. B. Bian et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Effect of cyclic rapid thermal loadings on the microstructural evolution of a CrMnFeCoNi high-entropy alloy manufactured by selective laser melting
H. Wang et al.
ACTA MATERIALIA (2020)
Fatigue behavior of CoCrFeMnNi high-entropy alloy under fully reversed cyclic deformation
Y. Z. Tian et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)
Dislocation densities and intergranular stresses of plastically deformed austenitic steels
Y. Tomota et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Fatigue and fracture behaviour of austenitic-martensitic high carbon steel under high cycle fatigue: An experimental investigation
Amborish Banerjee et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
High cycle fatigue and ratcheting interaction of laser powder bed fusion stainless steel 316L: Fracture behaviour and stress-based modelling
Meng Zhang et al.
INTERNATIONAL JOURNAL OF FATIGUE (2019)
Characterization of single crystalline austenitic stainless steel thin struts processed by laser powder bed fusion
X. Wang et al.
SCRIPTA MATERIALIA (2019)
Enhancement in fatigue performance of metastable austenitic stainless steel through directed energy deposition additive manufacturing
Jerard Gordon et al.
MATERIALS & DESIGN (2019)
High-entropy alloys
Easo P. George et al.
NATURE REVIEWS MATERIALS (2019)
Extremely high fatigue resistance in an ultrafine grained high entropy alloy
K. Liu et al.
APPLIED MATERIALS TODAY (2019)
High-cycle fatigue and tensile deformation behaviors of coarse-grained equiatomic CoCrFeMnNi high entropy alloy and unexpected hardening behavior during cyclic loading
Young-Kyun Kim et al.
INTERMETALLICS (2019)
High-temperature creep behavior of gamma Ti-48Al-2Cr-2Nb alloy additively manufactured by electron beam melting
Young-Kyun Kim et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Selective laser melted equiatomic CoCrFeMnNi high-entropy alloy: Microstructure, anisotropic mechanical response, and multiple strengthening mechanism
Young-Kyun Kim et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Effect of carbon on cryogenic tensile behavior of CoCrFeMnNi-type high entropy alloys
M. Klimova et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Effect of Surface Mechanical Treatments on the Microstructure-Property-Performance of Engineering Alloys
Dharmesh Kumar et al.
MATERIALS (2019)
Novel TiB2-reinforced 316L stainless steel nanocomposites with excellent room- and high-temperature yield strength developed by additive manufacturing
Bandar AlMangour et al.
COMPOSITES PART B-ENGINEERING (2019)
Improving the high-cycle fatigue properties of twinning-induced plasticity steel by a novel surface treatment process
C. W. Shao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Tensile Properties and Serrated Flow Behavior of As-Cast CoCrFeMnNi High-Entropy Alloy at Room and Elevated Temperatures
Jeoung Han Kim et al.
METALS AND MATERIALS INTERNATIONAL (2019)
Fatigue behavior of ultrafine grained triplex Al0.3CoCrFeNi high entropy alloy
Kaimiao Liu et al.
SCRIPTA MATERIALIA (2019)
In-situ observation of martensitic transformation in an interstitial metastable high-entropy alloy during cathodic hydrogen charging
Dong Wang et al.
SCRIPTA MATERIALIA (2019)
Additively manufactured CoCrFeNiMn high-entropy alloy via pre-alloyed powder
Pan Wang et al.
MATERIALS & DESIGN (2019)
Interstitial equiatomic CoCrFeMnNi high-entropy alloys: carbon content, microstructure, and compositional homogeneity effects on deformation behavior
Zhiming Li
ACTA MATERIALIA (2019)
Shape-preserving machining produces gradient nanolaminate medium entropy alloys with high strain hardening capability
Wei Guo et al.
ACTA MATERIALIA (2019)
Microstructure and corrosion property of CrMnFeCoNi high entropy alloy coating on Q235 substrate via mechanical alloying method
Ye Tian et al.
SURFACES AND INTERFACES (2019)
Additively manufactured hierarchical stainless steels with high strength and ductility
Y. Morris Wang et al.
NATURE MATERIALS (2018)
Corrosion behavior of an equiatomic CoCrFeMnNi high-entropy alloy compared with 304 stainless steel in sulfuric acid solution
Hong Luo et al.
CORROSION SCIENCE (2018)
High temperature oxidation behavior of Cr-Mn-Fe-Co-Ni high entropy alloy
Young-Kyun Kim et al.
INTERMETALLICS (2018)
Microstructural mechanisms of fatigue crack non-propagation in TRIP-maraging steels
Z. Zhang et al.
INTERNATIONAL JOURNAL OF FATIGUE (2018)
Microstructure of equiatomic and non-equiatomic Ti-Nb-Ta-Zr-Mo high-entropy alloys for metallic biomaterials
Takeshi Nagase et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
A review on fundamental of high entropy alloys with promising high-temperature properties
Jian Chen et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Ultrahigh-strength CoCrFeMnNi high-entropy alloy wire rod with excellent resistance to hydrogen embrittlement
Young Jin Kwon et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Dislocation network in additive manufactured steel breaks strength-ductility trade-off
Leifeng Liu et al.
MATERIALS TODAY (2018)
Characterization of nano-scale oxides in austenitic stainless steel processed by powder bed fusion
Fuyao Yan et al.
SCRIPTA MATERIALIA (2018)
Hierarchical microstructure and strengthening mechanisms of a CoCrFeNiMn high entropy alloy additively manufactured by selective laser melting
Z. G. Zhu et al.
SCRIPTA MATERIALIA (2018)
Simultaneously enhanced strength and ductility for 3D-printed stainless steel 316L by selective laser melting
Zhongji Sun et al.
NPG ASIA MATERIALS (2018)
Effect of scanning strategy on texture formation in Ni-25 at.% Mo alloys fabricated by selective laser melting
Shi-Hai Sun et al.
MATERIALS & DESIGN (2018)
Nanosized precipitates and dislocation networks reinforced C-containing CoCrFeNi high-entropy alloy fabricated by selective laser melting
Wenqian Wu et al.
MATERIALS CHARACTERIZATION (2018)
Microstructure and mechanical properties of stainless steel 316L vertical struts manufactured by laser powder bed fusion process
Xianglong Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Predictive multiphase evolution in Al-containing high-entropy alloys
L. J. Santodonato et al.
NATURE COMMUNICATIONS (2018)
Study of Direct Fabrication of a Ti-6Al-4V Impeller on a Wrought Ti-6Al-4V Plate by Electron Beam Melting
Pan Wang et al.
JOM (2017)
Strong and Ductile Non-equiatomic High-Entropy Alloys: Design, Processing, Microstructure, and Mechanical Properties
Zhiming Li et al.
JOM (2017)
Fatigue and fracture behaviour of laser powder bed fusion stainless steel 316L: Influence of processing parameters
Meng Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Oxide dispersion strengthened CoCrFeNiMn high-entropy alloy
Hynek Hadraba et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Microstructure evolution and mechanical properties of Al-Al2O3 composites fabricated by selective laser melting
Jiubin Jue et al.
POWDER TECHNOLOGY (2017)
Additive manufacturing of metals: a brief review of the characteristic microstructures and properties of steels, Ti-6Al-4V and high-entropy alloys
Stephane Gorsse et al.
SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS (2017)
Recent developments in ultrasonic fatigue
H. Mayer
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2016)
Microstructure evolution and critical stress for twinning in the CrMnFeCoNi high-entropy alloy
G. Laplanche et al.
ACTA MATERIALIA (2016)
Additive manufacturing of metals
Dirk Herzog et al.
ACTA MATERIALIA (2016)
Spatial and geometrical-based characterization of microstructure and microhardness for an electron beam melted Ti-6Al-4V component
Pan Wang et al.
MATERIALS & DESIGN (2016)
Selective laser melting of TiC reinforced 316L stainless steel matrix nanocomposites: Influence of starting TiC particle size and volume content
Bandar AlMangour et al.
MATERIALS & DESIGN (2016)
Effect of compression Residual Stress on Fatigue Properties of Stainless Cast Steel
T. Hanaki et al.
21ST EUROPEAN CONFERENCE ON FRACTURE, (ECF21) (2016)
Selective laser melting of Al-8.5Fe-1.3V-1.7Si alloy: Investigation on the resultant microstructure and hardness
Zheng Lijing et al.
CHINESE JOURNAL OF AERONAUTICS (2015)
Textures formed in a CoCrMo alloy by selective laser melting
Xin Zhou et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
Nanoscale origins of the damage tolerance of the high-entropy alloy CrMnFeCoNi
ZiJiao Zhang et al.
NATURE COMMUNICATIONS (2015)
Fatigue Performance of laser additive Manufactured Ti-6al-4V in Very high cycle Fatigue regime up to 10(9) cycles
Eric Wycisk et al.
FRONTIERS IN MATERIALS (2015)
An Experimental Investigation into Additive Manufacturing-Induced Residual Stresses in 316L Stainless Steel
Amanda S. Wu et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2014)
A fracture-resistant high-entropy alloy for cryogenic applications
Bernd Gludovatz et al.
SCIENCE (2014)
Microstructure and tensile properties of selectively laser-melted and of HIPed laser-melted Ti-6Al-4V
Chunlei Qiu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Densification behavior, microstructure evolution, and wear performance of selective laser melting processed commercially pure titanium
Dongdong Gu et al.
ACTA MATERIALIA (2012)
Experimental investigation and fatigue life prediction for 7475-T7351 aluminum alloy with and without shot peening-induced residual stresses
Y. K. Gao et al.
ACTA MATERIALIA (2011)
High-cycle fatigue behavior of ultrafine-grained austenitic stainless and TWIP steels
A. S. Hamada et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Comparison of the fatigue behavior and residual stress stability of laser-shock peened and deep rolled austenitic stainless steel AISI 304 in the temperature range 25-600°C
I. Nikitin et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2007)
Microstructural development in equiatomic multicomponent alloys
B Cantor et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)
Nanostructured high-entropy alloys with multiple principal elements: Novel alloy design concepts and outcomes
JW Yeh et al.
ADVANCED ENGINEERING MATERIALS (2004)
分享论文
