相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Comparison of material properties and biofilm formation in interim single crowns obtained by 3D printing and conventional methods
Debora Meincke Simoneti et al.
JOURNAL OF PROSTHETIC DENTISTRY (2022)
Twelve tips for integrating ultrasound guided peripheral intravenous access clinical skills teaching into undergraduate medical education
Luke McMenamin et al.
MEDICAL TEACHER (2021)
Taguchi's methods to optimize the properties and bioactivity of 3D printed polycaprolactone/mineral trioxide aggregate scaffold: Theoretical predictions and experimental validation
Aishwarya Bhargav et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2020)
Improvement of osseointegration by recruiting stem cells to titanium implants fabricated with 3D printing
Mary Bollman et al.
ANNALS OF THE NEW YORK ACADEMY OF SCIENCES (2020)
Use of 3D Organoids as a Model to Study Idiopathic Form of Parkinson's Disease
Paula Chlebanowska et al.
INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2020)
In vivo degradation rate of alginate-chitosan hydrogels influences tissue repair following physeal injury
Christopher B. Erickson et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2020)
Indirect selective laser sintering-printed microporous biphasic calcium phosphate scaffold promotes endogenous bone regeneration via activation of ERK1/2 signaling
Hao Zeng et al.
BIOFABRICATION (2020)
Development of a Three-Dimensional Bioengineered Platform for Articular Cartilage Regeneration
Gerard Rubi-Sans et al.
BIOMOLECULES (2020)
Preparation of antibacterial and osteoconductive 3D-printed PLGA/Cu(I)@ZIF-8 nanocomposite scaffolds for infected bone repair
Fei Zou et al.
JOURNAL OF NANOBIOTECHNOLOGY (2020)
Pluripotent stem cells for neurodegenerative disease modeling: an expert view on their value to drug discovery
Shi-Dong Chen et al.
EXPERT OPINION ON DRUG DISCOVERY (2020)
Fabrication of Mechanically Reinforced Gelatin/Hydroxyapatite Bio-Composite Scaffolds by Core/Shell Nozzle Printing for Bone Tissue Engineering
Haeri Kim et al.
INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2020)
A Modular Differentiation System Maps Multiple Human Kidney Lineages from Pluripotent Stem Cells
Hiraku Tsujimoto et al.
CELL REPORTS (2020)
Preparation and Characterization of Color Photocurable Resins for Full-Color Material Jetting Additive Manufacturing
Yih-Lin Cheng et al.
POLYMERS (2020)
Bone-derived dECM/alginate bioink for fabricating a 3D cell-laden mesh structure for bone tissue engineering
Jiun Lee et al.
CARBOHYDRATE POLYMERS (2020)
3D-HA Scaffold Functionalized by Extracellular Matrix of Stem Cells Promotes Bone Repair
Hui Chi et al.
INTERNATIONAL JOURNAL OF NANOMEDICINE (2020)
3D Printing of Cytocompatible Graphene/Alginate Scaffolds for Mimetic Tissue Constructs
Jianfeng Li et al.
FRONTIERS IN BIOENGINEERING AND BIOTECHNOLOGY (2020)
Polymer-Bioactive Glass Composite Filaments for 3D Scaffold Manufacturing by Fused Deposition Modeling: Fabrication and Characterization
Thomas Distler et al.
FRONTIERS IN BIOENGINEERING AND BIOTECHNOLOGY (2020)
Integrating cold atmospheric plasma with 3D printed bioactive nanocomposite scaffold for cartilage regeneration
Se-jun Lee et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2020)
Pluripotent Stem Cell-Based Cell Therapy- Promise and Challenges
Shinya Yamanaka
CELL STEM CELL (2020)
Patient specific implants for jawbone reconstruction after tumor resection
Roman Major et al.
COLLOIDS AND SURFACES B-BIOINTERFACES (2020)
Bio-Inspired Toughening of Composites in 3D-Printing
Johannes Stoegerer et al.
MATERIALS (2020)
Indirect versus direct 3D printing of hydrogel scaffolds for adipose tissue regeneration
Lana Van Damme et al.
MRS ADVANCES (2020)
Bioprinted Three-Dimensional Cell-Laden Hydrogels to Evaluate Adipocyte-Breast Cancer Cell Interactions
Sarah Chaji et al.
GELS (2020)
Study on antibacterial properties and cytocompatibility of EPL coated 3D printed PCL/HA composite scaffolds
Lijiao Tian et al.
RSC ADVANCES (2020)
Three-Dimensional Printing of Archived Human Fetal Material for Teaching Purposes
Julia C. Young et al.
ANATOMICAL SCIENCES EDUCATION (2019)
Development of Gelatin and Graphene-Based Nerve Regeneration Conduits Using Three-Dimensional (3D) Printing Strategies for Electrical Transdifferentiation of Mesenchymal Stem Cells
Metin Uz et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2019)
Three-Dimensional Printed Scaffolds with Controlled Micro-/Nanoporous Surface Topography Direct Chondrogenic and Osteogenic Differentiation of Mesenchymal Stem Cells
Aruna Prasopthum et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
Enhancing cell seeding and osteogenesis of MSCs on 3D printed scaffolds through injectable BMP2 immobilized ECM-Mimetic gel
Farahnaz Fahimipour et al.
DENTAL MATERIALS (2019)
Biomimetic poly(glycerol sebacate)/polycaprolactone blend scaffolds for cartilage tissue engineering
Yadong Liu et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2019)
Selective laser melting of Ti alloys and hydroxyapatite for tissue engineering: progress and challenges
Hassanen Jaber et al.
MATERIALS RESEARCH EXPRESS (2019)
Water-based 3D inkjet printing of an oral pharmaceutical dosage form
Hatim K. Cader et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2019)
Co-culture cell-derived extracellular matrix loaded electrospun microfibrous scaffolds for bone tissue engineering
Marta S. Carvalho et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2019)
Highly porous PHB-based bioactive scaffolds for bone tissue engineering by in situ synthesis of hydroxyapatite
Micaela Degli Esposti et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2019)
The Applications of 3D Printing for Craniofacial Tissue Engineering
Owen Tao et al.
MICROMACHINES (2019)
Osteochondral Regeneration with 3D-Printed Biodegradable High-Strength Supramolecular Polymer Reinforced-Gelatin Hydrogel Scaffolds
Fei Gao et al.
ADVANCED SCIENCE (2019)
Hierarchically Porous Hydroxyapatite Hybrid Scaffold Incorporated with Reduced Graphene Oxide for Rapid Bone Ingrowth and Repair
Kai Zhou et al.
ACS NANO (2019)
Novel chitosan/agarose/hydroxyapatite nanocomposite scaffold for bone tissue engineering applications: comprehensive evaluation of biocompatibility and osteoinductivity with the use of osteoblasts and mesenchymal stem cells
Paulina Kazimierczak et al.
INTERNATIONAL JOURNAL OF NANOMEDICINE (2019)
Microstructural evolution and resulting properties of differently sintered and heat-treated binder-jet 3D-printed Stellite 6
Amir Mostafaei et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2019)
Fabrication of hierarchically porous silk fibroin-bioactive glass composite scaffold via indirect 3D printing: Effect of particle size on physico-mechanical properties and in vitro cellular behavior
Mina Razaghzadeh Bidgoli et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2019)
Human Stem Cell Responses and Surface Characteristics of 3D Printing Co-Cr Dental Material
Boldbayar Ganbold et al.
MATERIALS (2019)
Craniosynostosis surgery: workflow based on virtual surgical planning, intraoperative navigation and 3D printed patient-specific guides and templates
David Garcia-Mato et al.
SCIENTIFIC REPORTS (2019)
Collagen-infilled 3D printed scaffolds loaded with miR-148b-transfected bone marrow stem cells improve calvarial bone regeneration in rats
Kazim K. Moncal et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2019)
Polyester-based ink platform with tunable bioactivity for 3D printing of tissue engineering scaffolds
Shen Ji et al.
BIOMATERIALS SCIENCE (2019)
3D printing of layered mesoporous bioactive glass/sodium alginate-sodium alginate scaffolds with controllable dual-drug release behaviors
Shengyang Fu et al.
BIOMEDICAL MATERIALS (2019)
Graphene oxide/alginate composites as novel bioinks for three-dimensional mesenchymal stem cell printing and bone regeneration applications
Goeun Choe et al.
NANOSCALE (2019)
Characterization of printed PLA scaffolds for bone tissue engineering
Agathe Gremare et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2018)
Nano-biphasic calcium phosphate/polyvinyl alcohol composites with enhanced bioactivity for bone repair via low-temperature three-dimensional printing and loading with platelet-rich fibrin
Yue Song et al.
INTERNATIONAL JOURNAL OF NANOMEDICINE (2018)
3D printing of concentrated alginate/gelatin scaffolds with homogeneous nano apatite coating for bone tissue engineering
Yongxiang Luo et al.
MATERIALS & DESIGN (2018)
3D printing for preoperative planning and surgical training: a review
Anurup Ganguli et al.
BIOMEDICAL MICRODEVICES (2018)
Multifunctional effects of a modification of SLA titanium implant surface with strontium-containing nanostructures on immunoinflammatory and osteogenic cell function
Sung-Min Choi et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2018)
Direct three-dimensional printing of polymeric scaffolds with nanofibrous topography
Aruna Prasopthum et al.
BIOFABRICATION (2018)
Effects of scaffold microstructure and low intensity pulsed ultrasound on chondrogenic differentiation of human mesenchymal stem cells
Mitra Aliabouzar et al.
BIOTECHNOLOGY AND BIOENGINEERING (2018)
A dentin-derived hydrogel bioink for 3D bioprinting of cell laden scaffolds for regenerative dentistry
Avathamsa Athirasala et al.
BIOFABRICATION (2018)
3D bioprint me: a socioethical view of bioprinting human organs and tissues
Niki Vermeulen et al.
JOURNAL OF MEDICAL ETHICS (2017)
Analysis of polycaprolactone scaffolds fabricated via precision extrusion deposition for control of craniofacial tissue mineralization
C. W. Fedore et al.
ORTHODONTICS & CRANIOFACIAL RESEARCH (2017)
Concise Review: Multifaceted Characterization of Human Mesenchymal Stem Cells for Use in Regenerative Medicine
Rebekah M. Samsonraj et al.
STEM CELLS TRANSLATIONAL MEDICINE (2017)
Customized Titanium Mesh Based on the 3D Printed Model vs. Manual Intraoperative Bending of Titanium Mesh for Reconstructing of Orbital Bone Fracture: A Randomized Clinical Trial
Shahrokh Raisian et al.
REVIEWS ON RECENT CLINICAL TRIALS (2017)
Surface-enrichment with hydroxyapatite nanoparticles in stereolithography-fabricated composite polymer scaffolds promotes bone repair
O. Guillaume et al.
ACTA BIOMATERIALIA (2017)
Improving PEEK bioactivity for craniofacial reconstruction using a 3D printed scaffold embedded with mesenchymal stem cells
Michael Roskies et al.
JOURNAL OF BIOMATERIALS APPLICATIONS (2016)
Computed tomographic evaluation of novel custom-made artificial bones, CT-bone, applied for maxillofacial reconstruction
Yuki Kanno et al.
REGENERATIVE THERAPY (2016)
Three-Dimensional Printing and Medical Imaging: A Review of the Methods and Applications
Alessandro Marro et al.
CURRENT PROBLEMS IN DIAGNOSTIC RADIOLOGY (2016)
Effect of bioink properties on printability and cell viability for 3D bioplotting of embryonic stem cells
Liliang Ouyang et al.
BIOFABRICATION (2016)
Indirect additive manufacturing as an elegant tool for the production of self-supporting low density gelatin scaffolds
Jasper Van Hoorick et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2015)
Progressing a human embryonic stem-cell-based regenerative medicine therapy towards the clinic
Paul Whiting et al.
PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY B-BIOLOGICAL SCIENCES (2015)
3D Printing of Scaffolds for Tissue Regeneration Applications
Anh-Vu Do et al.
ADVANCED HEALTHCARE MATERIALS (2015)
Review of selective laser melting: Materials and applications
C. Y. Yap et al.
APPLIED PHYSICS REVIEWS (2015)
Optimization of fused deposition modeling process parameters: a review of current research and future prospects
Omar A. Mohamed et al.
ADVANCES IN MANUFACTURING (2015)
Monolithic Space-Filling Porous Materials from Engineering Plastics by Thermally Induced Phase Separation
Ahmed Elhaj et al.
ACS APPLIED MATERIALS & INTERFACES (2014)
A review of melt extrusion additive manufacturing processes: I. Process design and modeling
Brian N. Turner et al.
RAPID PROTOTYPING JOURNAL (2014)
Bioplotting Alginate/Hyaluronic Acid Hydrogel Scaffolds with Structural Integrity and Preserved Schwann Cell Viability
Ajay Rajaram et al.
3D PRINTING AND ADDITIVE MANUFACTURING (2014)
Bone tissue engineering using 3D printing
Susmita Bose et al.
MATERIALS TODAY (2013)
A review of trends and limitations in hydrogel-rapid prototyping for tissue engineering
Thomas Billiet et al.
BIOMATERIALS (2012)
Fabrication of three-dimensional scaffolds using precision extrusion deposition with an assisted cooling device
Q. Hamid et al.
BIOFABRICATION (2011)
Fabrication of 13-93 bioactive glass scaffolds for bone tissue engineering using indirect selective laser sintering
Krishna C. R. Kolan et al.
BIOFABRICATION (2011)
Fabricating a pearl/PLGA composite scaffold by the low-temperature deposition manufacturing technique for bone tissue engineering
Mingen Xu et al.
BIOFABRICATION (2010)
Rapid prototyping and manufacturing technology: Principle, representative technics, applications, and development trends
Yongnian Yan et al.
TSINGHUA SCIENCE AND TECHNOLOGY (2009)
Indirect selective laser sintering of apatite-wollostonite glass-ceramic
K. Xiao et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE (2008)
Processing and characterization of porous structures from chitosan and starch for tissue engineering scaffolds
Javier Nakamatsu et al.
BIOMACROMOLECULES (2006)
Induction of pluripotent stem cells from mouse embryonic and adult fibroblast cultures by defined factors
Kazutoshi Takahashi et al.
CELL (2006)
Indirect selective laser sintering of an apatite-mullite glass-ceramic for potential use in bone replacement applications
RD Goodridge et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE (2006)
Precision extruding deposition and characterization of cellular poly-epsilon-caprolactone tissue scaffolds
F Wang et al.
RAPID PROTOTYPING JOURNAL (2004)