A highly sensitive quadruple D-shaped open channel photonic crystal fiber plasmonic sensor: A comparative study on materials effect

A highly sensitive dual-polarized 'X' oriented quadruple D-shaped open channel photonic crystal fiber (PCF) based surface plasmon resonance (SPR) sensor for various analyte detection is proposed in this paper. Gold is taken as a plasmonic material for its stability and compatibility. Silicon nitride (Si3N4) and titanium oxide (TiO2) has been used separately as an adhesive layer of gold to elevate the sustainability of the evanescent field. This paper shows a comparative study and inspects the effect of sensing performance between Si3N4 and TiO2 as an adhesive layer of gold. Numerical investigations have been followed up using the finite element method (FEM). For practical feasibility, analyte and plasmonic materials have been placed at the outer surface of the sensor. After watchful investigation, the maximum wavelength sensitivities of 21,000 nm/RIU (Refractive Index Unit) and 18,000 nm/RIU have been found for the y-polarization when using TiO2 and Si3N4, respectively. The highest amplitude sensitivities are of 914RIU(-1) and 625RIU(-1) for TiO2 and Si3N4, respectively. Furthermore, minimum wavelength resolutions of 4.76 x 10(-6) RIU and 5.55 x 10(-6) RIU have been observed in y-polarization for TiO2 and Si3N4, respectively. The sensor evinces a maximum figure of merit (FOM) of 236RIU(-1) for TiO2. This sensor has the analyte sensing range of 1.31-1.38RI (Refractive Index) for TiO2 and 1.32-1.39RI for Si3N4. The sensor also delivers low confinement loss for Si3N4 and TiO2, which certifies viability in fabricating the design. Recognizing this sensor?s wavelength sensitivity, amplitude sensitivity, and sensing RI range, it could be a promising candidate for detecting different liquid analytes with excellent accuracy.

Automated summary

This paper proposes a highly sensitive dual-polarized photonic crystal fiber-based surface plasmon resonance sensor for detecting various analytes, using gold as a plasmonic material and silicon nitride and titanium oxide as adhesive layers. Numerical investigations and experiments are conducted to compare the sensing performance of using TiO2 and Si3N4 as adhesive layers in the sensor design.