期刊
JOURNAL OF MANUFACTURING PROCESSES
卷 62, 期 -, 页码 670-684出版社
ELSEVIER SCI LTD
DOI: 10.1016/j.jmapro.2020.12.071
关键词
SiCp/Al composites; Laser melting modification; Surface layer formation; Precision milling; Tool wear; Surface integrity
资金
- National Natural Science Foundation of China [51625502, 51805191]
- National Key Research and Development Program of China [2018YFB1701904]
Through a combination of laser surface melting modification and precision milling, this study significantly improved the machinability and surface quality of SiCp/Al composites. During the laser processing, the reaction between SiC reinforcement particles and the liquid Al matrix formed needle-shaped carbides and particle accumulation zone. Results from precision milling experiments showed that when the total depth of cut does not exceed the modified zone depth, the surface roughness and tool wear can be significantly reduced.
SiCp/Al composites are extremely difficult to process due to excessive tool wear and poor surface integrity. This paper presents a novel material processing method combining laser surface melting modification and precision milling to improve the machinability and surface performance of this material. The surface layer laser modification experiments were carried out by controlling the parameters of the laser processing and the volume fractions of the reinforcements. The mechanisms of the laser surface modification at the optimized temperatures between 1397 degrees C and 2000 degrees C are revealed as follows: a) a portion of the SiC reinforced particles will react with the molten liquid Al matrix to form the needle-shaped Al4SiC4 ternary carbide and faceted Si particles, together with Al and Al-Si eutectics, constitute the laser modified zone; and b) the remaining SiC reinforced particles sink into the bottom of the Al matrix molten pool to form the particles accumulation zone. Then, the precision milling experiments were conducted to investigate the differences in cutting force, tool wear, and surface integrity between the modified zone and the original zone. When the total depth of cut doesn't exceed the modified zone depth, the surface roughness and tool wear can be improved by 90.36 % and 61.03 %, respectively.
作者
我是这篇论文的作者
点击您的名字以认领此论文并将其添加到您的个人资料中。
推荐
暂无数据