相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。A review of natural fiber composites: properties, modification and processing techniques, characterization, applications
Aliakbar Gholampour et al.
JOURNAL OF MATERIALS SCIENCE (2020)
Subcritical water extraction of essential oil from Aquilaria malaccensis leaves
M. Samadi et al.
SEPARATION SCIENCE AND TECHNOLOGY (2020)
Investigating the effects of liquid-plasma treatment on tensile strength of coir fibers and interfacial fiber-matrix adhesion of composites
Andi Erwin Eka Putra et al.
COMPOSITES PART B-ENGINEERING (2020)
Effect of microcrystalline cellulose [MCC] fibres on the morphological and crystalline behaviour of high density polyethylene [HDPE]/polylactic acid [PLA] blends
Siddharth Mohan Bhasney et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2020)
The Middle Lamella of Plant Fibers Used as Composite Reinforcement: Investigation by Atomic Force Microscopy
Alessia Melelli et al.
MOLECULES (2020)
Natural Fibre Modification and Its Influence on Fibre-matrix Interfacial Properties in Biocomposite Materials
S. O. Amiandamhen et al.
FIBERS AND POLYMERS (2020)
Characterization of a novel natural cellulosic fiber from Calotropis gigantea fruit bunch for ecofriendly polymer composites
P. Narayanasamy et al.
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2020)
Peanut oil cake-derived cellulose fiber: Extraction, application of mechanical and thermal properties in pineapple/flax natural fiber composites
K. R. Sumesh et al.
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2020)
A new study on effect of various chemical treatments on Agave Americana fiber for composite reinforcement: Physico-chemical, thermal, mechanical and morphological properties
P. Madhu et al.
POLYMER TESTING (2020)
Thermal behavior of graphene oxide-coated piassava fiber and their epoxy composites
Fabio da Costa Garcia Filho et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
Recent advancements of plant-based natural fiber-reinforced composites and their applications
Mi Li et al.
COMPOSITES PART B-ENGINEERING (2020)
AFM based nanomechanical characterization of cellulose nanofibril
M. Subbir Parvej et al.
JOURNAL OF COMPOSITE MATERIALS (2020)
Natural fiber-induced degradation in PLA-hemp biocomposites in the molten state
V Mazzanti et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2020)
Influence of distilled water and alkaline solution on the scratch resistance properties of Napier fibre filled epoxy (NFFE) composites
Solomon Ugochukwu et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
Effect of hemp fiber length on the mechanical and thermal properties of polypropylene/SEBS/hemp fiber composites
Denis Mihaela Panaitescu et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
Novel biodegradable polymer films based on poly(3-hydroxybutyrate-co-3-hydroxyvalerate) and Ceiba pentandra natural fibers for packaging applications
Sandhya Alice Varghese et al.
FOOD PACKAGING AND SHELF LIFE (2020)
Study on biodegradability and thermal behaviour of composites using poly lactic acid and gamma-irradiated fibres of Luffa cylindrica
Swarnalata Tripathy et al.
CHEMOSPHERE (2020)
Tensile strength and thermal behavior of jute fibre reinforced polypropylene laminate composite
Arobindo Chatterjee et al.
COMPOSITES COMMUNICATIONS (2020)
Biocomposites from bamboo fibers and palm oil-based thermosets: Effects of natural phenolic cross-linkers
Yuchao Wu et al.
COMPOSITES COMMUNICATIONS (2020)
Thermogravimetry and Interfacial Characterization of Alkaline Treated Cantala fiber/Microcrystalline Cellulose-Composite
Sakuri Sakuri et al.
6TH INTERNATIONAL E-CONFERENCE ON INDUSTRIAL, MECHANICAL, ELECTRICAL AND CHEMICAL ENGINEERING (ICIMECE 2020) SPECIAL SYMPOSIUM - INTEGRITY OF MECHANICAL STRUCTURE AND MATERIAL (2020)
Production of cellulose nanocrystals from pineapple crown fibers through alkaline pretreatment and acid hydrolysis under different conditions
Lurima Uane Soares Faria et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
Interfacial compatibilization via in-situ polymerization of epoxidized soybean oil for bamboo fibers reinforced poly(lactic acid) biocomposites
Tingting Chen et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2020)
Tert-butyl catechol/alkaline-treated kenaf/jute polyethylene hybrid composites: impact on physico-mechanical, thermal and morphological properties
Md Rezaur Rahman et al.
POLYMER BULLETIN (2019)
Additive manufacturing of natural fiber reinforced polymer composites: Processing and prospects
Vamsi Krishna Balla et al.
COMPOSITES PART B-ENGINEERING (2019)
Exploiting Plasma Exposed, Natural Surface Nanostructures in Ramie Fibers for Polymer Composite Applications
Sameer F. Hamad et al.
MATERIALS (2019)
Interface properties and their effect on the mechanical performance of flax fibre thermoplastic composites
W. Woigk et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)
Characterization of cellulose fibers in Thespesia populnea barks: Influence of alkali treatment
M. Kathirselvam et al.
CARBOHYDRATE POLYMERS (2019)
Characterization of raw and alkali treated new natural cellulosic fibres extracted from the aerial roots of banyan tree
T. Ganapathy et al.
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2019)
Fiber-Reinforced Polymer Composites: Manufacturing, Properties, and Applications
Dipen Kumar Rajak et al.
POLYMERS (2019)
Mechanical Characteristics of Green Composites of Short Kenaf Bast Fiber Reinforced in Cardanol
Zahra Dashtizadeh et al.
ADVANCES IN MATERIALS SCIENCE AND ENGINEERING (2019)
Influence of sodium bicarbonate treatment on the aging resistance of natural fiber reinforced polymer composites under marine environment
V Fiore et al.
POLYMER TESTING (2019)
Progress in the research and applications of natural fiber-reinforced polymer matrix composites
Zhanying Sun
SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS (2018)
Study on characterization of Furcraea foetida new natural fiber as composite reinforcement for lightweight applications
P. Manimaran et al.
CARBOHYDRATE POLYMERS (2018)
Thermal, physical properties and flammability of silane treated kenaf/pineapple leaf fibres phenolic hybrid composites
M. Asim et al.
COMPOSITE STRUCTURES (2018)
Effects of sodium carbonate on the performance of epoxy and polyester coir-reinforced composites
Julio Cesar dos Santos et al.
POLYMER TESTING (2018)
The Improvement of Mechanical Properties, Thermal Stability, and Water Absorption Resistance of an Eco-Friendly PLA/Kenaf Biocomposite Using Acetylation
Taek-Jun Chung et al.
APPLIED SCIENCES-BASEL (2018)
Effects of Surface Treatments on Tensile, Thermal and Fibre-matrix Bond Strength of Coir and Pineapple Leaf Fibres with Poly Lactic Acid
Ramengmawii Siakeng et al.
JOURNAL OF BIONIC ENGINEERING (2018)
Interfacial Characterization by Pull-Out Test of Bamboo Fibers Embedded in Poly(Lactic Acid)
Quentin Viel et al.
FIBERS (2018)
Improvement of the interface bonding between date palm fibers and polymeric matrices using alkali-silane treatments
Abdessamad Oushabi et al.
INTERNATIONAL JOURNAL OF INDUSTRIAL CHEMISTRY (2018)
Bacterial Nanocellulose from Side-Streams of Kombucha Beverages Production: Preparation and Physical-Chemical Properties
Stefan-Ovidiu Dima et al.
POLYMERS (2017)
Bio-based coatings for reducing water sorption in natural fibre reinforced composites
T. H. Mokhothu et al.
SCIENTIFIC REPORTS (2017)
Surface lignin removal on coir fibers by plasma treatment for improved adhesion in thermoplastic starch composites
Joao Gabriel Guimaraes de Farias et al.
CARBOHYDRATE POLYMERS (2017)
A novel approach for extracting cellulose nanofibers from lignocellulosic biomass by ball milling combined with chemical treatment
Md. Nuruddin et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2016)
A review of recent developments in natural fibre composites and their mechanical performance
K. L. Pickering et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)
Interface and bonding mechanisms of plant fibre composites: An overview
Yonghui Zhou et al.
COMPOSITES PART B-ENGINEERING (2016)
A new eco-friendly chemical treatment of natural fibres: Effect of sodium bicarbonate on properties of sisal fibre and its epoxy composites
V. Fiore et al.
COMPOSITES PART B-ENGINEERING (2016)
A versatile method for producing functionalized cellulose nanofibers and their application
Pei Huang et al.
NANOSCALE (2016)
Influence of alkaline treatment and fiber loading on the physical and mechanical properties of kenaf/polypropylene composites for variety of applications
Majid Niaz Akhtar et al.
PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL (2016)
Electrostatic adhesion for added functionality of composite structures
Callum J. C. Heath et al.
SMART MATERIALS AND STRUCTURES (2016)
Influence of alkaline treatment and fiber loading on the physical and mechanical properties of kenaf/polypropylene composites for variety of applications
Majid Niaz Akhtar et al.
PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL (2016)
Environmental effects on fibre reinforced polymeric composites: Evolving reasons and remarks on interfacial strength and stability
Sanghamitra Sethi et al.
ADVANCES IN COLLOID AND INTERFACE SCIENCE (2015)
Fiber-matrix interfacial adhesion in natural fiber composites
L. Q. N. Tran et al.
INTERNATIONAL JOURNAL OF MODERN PHYSICS B (2015)
Modelling of progressive fibre/matrix debonding in short-fibre reinforced composites up to failure
D. Notta-Cuvier et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2015)
Effects of MAPP Compatibilization and Acetylation Treatment Followed by Hydrothermal Aging on Polypropylene Alfa Fiber Composites
Noura Hamour et al.
INTERNATIONAL JOURNAL OF POLYMER SCIENCE (2015)
A Review on Natural Fiber Reinforced Polymer Composite and Its Applications
Layth Mohammed et al.
INTERNATIONAL JOURNAL OF POLYMER SCIENCE (2015)
Effect of Chemical Treatment of Flax Fiber and Resin Manipulation on Service Life of Their Composites Using Time-Temperature Superposition
Ali Amiri et al.
POLYMERS (2015)
Surface Treated Natural Fibres as Filler in Biocomposites
I. Schwarzova et al.
2ND INTERNATIONAL CONFERENCE ON INNOVATIVE MATERIALS, STRUCTURES AND TECHNOLOGIES (2015)
Effect of Peroxide and Softness Modification on Properties of Ramie Fiber
Zhaoling Li et al.
FIBERS AND POLYMERS (2014)
A study into the characteristics of gomuti (Arenga pinnata) fibre for usage as natural fibre composites
Adriana Ticoalu et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2014)
Chemical Composition of Natural Fibers and its Influence on their Mechanical Properties
A. Komuraiah et al.
MECHANICS OF COMPOSITE MATERIALS (2014)
Morphology, Structure, and Mechanical Properties of Natural Cellulose Fiber from Mendong Grass (Fimbristylis globulosa)
Hero Suryanto et al.
JOURNAL OF NATURAL FIBERS (2014)
A Review of the Flammability Factors of Kenaf and Allied Fibre Reinforced Polymer Composites
C. H. Lee et al.
ADVANCES IN MATERIALS SCIENCE AND ENGINEERING (2014)
The surface properties of cellulose and lignocellulosic materials assessed by inverse gas chromatography: a review
Jose A. F. Gamelas
CELLULOSE (2013)
Effect of physical adhesion on mechanical behaviour of bamboo fibre reinforced thermoplastic composites
C. A. Fuentes et al.
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2013)
Tensile and structural characterization of alkali treated Borassus fruit fine fibers
K. Obi Reddy et al.
COMPOSITES PART B-ENGINEERING (2013)
Understanding the interfacial compatibility and adhesion of natural coir fibre thermoplastic composites
L. Q. N. Tran et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2013)
Characterization of natural fiber and composites - A review
T. P. Sathishkumar et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2013)
Investigation on the surface properties of chemically modified natural fibers using inverse gas chromatography
Nereida Cordeiro et al.
CARBOHYDRATE POLYMERS (2012)
Effect of physicochemical structure of natural fiber on transverse thermal conductivity of unidirectional abaca/bamboo fiber composites
Ke Liu et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2012)
The effects of alkali-silane treatment on the tensile and flexural properties of short fibre non-woven kenaf reinforced polypropylene composites
O. M. L. Asumani et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2012)
Effect of fiber surface treatments on mechanical and abrasive wear performance of polylactide/jute composites
Bhanu K. Goriparthi et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2012)
Comparison of injection moulded, natural fibre-reinforced composites with PP and PLA as matrices
J. P. Mofokeng et al.
JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2012)
Enzymatic Transformations of Cellulose Assessed by Quantitative High-Throughput Fourier Transform Infrared Spectroscopy (QHT-FTIR)
Stephane C. Corgie et al.
BIOTECHNOLOGY AND BIOENGINEERING (2011)
Natural fibers characterization by inverse gas chromatography
N. Cordeiro et al.
CARBOHYDRATE POLYMERS (2011)
Wetting analysis and surface characterisation of coir fibres used as reinforcement for composites
L. Q. N. Tran et al.
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2011)
A surface-property relationship of atmospheric plasma treated jute composites
Abdullah A. Kafi et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2011)
Investigation of surface properties of physico-chemically modified natural fibres using inverse gas chromatography
N. Cordeiro et al.
INDUSTRIAL CROPS AND PRODUCTS (2011)
Effect of Plasma Treatment on Structure, Wettability of Jute Fiber and Flexural Strength of its Composite
E. Sinha et al.
JOURNAL OF COMPOSITE MATERIALS (2009)
Isolation, preparation and characterization of cellulose microfibers obtained from bagasse
Deeparlian Bhattacharya et al.
CARBOHYDRATE POLYMERS (2008)
Effect of MAPP and TMPTA as compatibilizer on the mechanical properties of cellulose and oil palm fiber empty fruit bunch-polypropylene biocomposites
M. Khalid et al.
COMPOSITE INTERFACES (2008)
Chemical treatments of natural fiber for use in natural fiber-reinforced composites: A review
Xue Li et al.
JOURNAL OF POLYMERS AND THE ENVIRONMENT (2007)
Cellulose microfibrils from banana farming residues: isolation and characterization
Robin Zuluaga et al.
CELLULOSE (2007)
The effect of types of maleic anhydride-grafted polypropylene (MAPP) on the interfacial adhesion properties of bio-flour-filled polypropylene composites
Hee-Soo Kim et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2007)
The effect of compatibilizer and coupling agent on the properties of paper sludge filled polypropylene (PP)/ethylene propylene diene terpolymer (EPDM) composites
SH Ismail et al.
POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING (2005)
A study of the effect of acetylation and propionylation surface treatments on natural fibres
V Tserki et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2005)
The effect of alkalization and fibre alignment on the mechanical and thermal properties of kenaf and hemp bast fibre composites: Part 1 - polyester resin matrix
SH Aziz et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2004)
The effect of alkalization and fibre alignment on the mechanical and thermal properties of kenaf and hemp bast fibre composites: part 2 - cashew nut shell liquid matrix
SH Aziz et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2004)
A computer simulation of single fiber pull out process in a composite
W Zhong et al.
JOURNAL OF COMPOSITE MATERIALS (2003)
Preparation and properties of new regenerated cellulose fibers
YS Wang et al.
TEXTILE RESEARCH JOURNAL (2003)
The effect of fiber treatment on the mechanical properties of unidirectional sisal-reinforced epoxy composites
MZ Rong et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2001)