相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Experimental Investigations on the Tribological Performance of Electric Discharge Alloyed Ti-6Al-4V at 200-600 degrees C
Jibin T. Philip et al.
JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME (2020)
Surface Modification of Ti-6Al-4V Alloy by Electrical Discharge Coating Process Using Partially Sintered Ti-Nb Electrode
Chander Prakash et al.
MATERIALS (2019)
Wear Characteristic Evaluation of Electrical Discharge Machined Ti6Al4V Surfaces at Dry Sliding Conditions
Jibin T. Philip et al.
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS (2019)
Tribology of Ti6Al4V: A review
Jibin T. Philip et al.
FRICTION (2019)
Surface modification of Ti-alloy by micro-electrical discharge process using tungsten disulphide powder suspension
Shalini Mohanty et al.
JOURNAL OF MANUFACTURING PROCESSES (2019)
Multi Response Optimization and Experimental Investigations into the Impact of Wire EDM on the Tribological Properties of Ti-6Al-4V
Basil Kuriachen et al.
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS (2018)
Dry Sliding Wear Behavior of Ti-6Al-4V Pin Against SS316L Disk at Constant Contact Pressure
Ashok J. Raj et al.
JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME (2017)
Crystallinity, surface morphology, and chemical composition of the recast layer and rutile-TiO2 formation on Ti-6Al-4V ELI by wire-EDM to enhance biocompatibility
Saadman Sakib Rahman et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Electric discharge machining - A potential choice for surface modification of metallic implants for orthopedic applications: A review
Chander Prakash et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2016)
Thinning process of recast layer in hole drilling and trimming by EDM
C. J. Li et al.
18TH CIRP CONFERENCE ON ELECTRO PHYSICAL AND CHEMICAL MACHINING (ISEM XVIII) (2016)
Microstructure Evolution and Abrasive Wear Behavior of Ti-6Al-4V Alloy
Shreyash Hadke et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2015)
Effects of sliding velocity on tribo-oxides and wear behavior of Ti-6Al-4V alloy
X. X. Li et al.
TRIBOLOGY INTERNATIONAL (2015)
Relations of counterface materials with stability of tribo-oxide layer and wear behavior of Ti-6.5Al-3.5Mo-1.5Zr-0.3Si alloy
L. Wang et al.
TRIBOLOGY INTERNATIONAL (2015)
Degradation of titanium 6A1-4V fatigue strength due to electrical discharge machining
Todd M. Mower
INTERNATIONAL JOURNAL OF FATIGUE (2014)
Severe-to-Mild Wear Transition of Titanium Alloys as a Function of Temperature
L. Wang et al.
TRIBOLOGY LETTERS (2014)
Tribo-layer and its role in dry sliding wear of Ti-6Al-4V alloy
Y. S. Mao et al.
WEAR (2013)
The effect of laser surface texturing on the tribological behavior of Ti-6Al-4V
Tianchang Hu et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY (2012)
Fretting wear and friction reduction of CP titanium and Ti-6Al-4V alloy by ultrasonic nanocrystalline surface modification
Auezhan Amanov et al.
SURFACE & COATINGS TECHNOLOGY (2012)
Wear Characteristics of Ti-6Al-4V Alloy at 20-400°C
X. H. Cui et al.
TRIBOLOGY TRANSACTIONS (2012)
Study of the recast layer of a surface machined by sinking electrical discharge machining using water-in-oil emulsion as dielectric
Yanzhen Zhang et al.
APPLIED SURFACE SCIENCE (2011)
Machining induced surface integrity in titanium and nickel alloys: A review
Durul Ulutan et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2011)
The effect of microstructure on fatigue performance of Ti-6Al-4V alloy after EDM surface treatment for application in orthopaedics
Josef Strasky et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2011)
Improving tribological properties of Ti6Al4V alloy with duplex surface treatment
A. F. Yetim et al.
SURFACE & COATINGS TECHNOLOGY (2010)
Surface modification by electrical discharge machining: A review
Sanjeev Kumar et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2009)
Ti based biomaterials, the ultimate choice for orthopaedic implants - A review
M. Geetha et al.
PROGRESS IN MATERIALS SCIENCE (2009)
Comparison of dry sliding friction and wear of Ti6Al4V alloy treated by plasma electrolytic oxidation and PVD coating
L. Ceschini et al.
WEAR (2008)
Residual stresses and white layer in electric discharge machining (EDM)
Buelent Ekmekci
APPLIED SURFACE SCIENCE (2007)
Electrical discharge machining of titanium alloy (Ti-6Al-4V)
Ahmet Hascalik et al.
APPLIED SURFACE SCIENCE (2007)
Surface modification of Ti-6Al-4V alloy by nitrogen ion implantation
P. Budzynski et al.
WEAR (2006)
Structure and tribological performance of modified layer on Ti6Al4V alloy by plasma-based ion implantation with oxygen
Jinlong Li et al.
WEAR (2006)
Microstructure and tribological characteristics of Ti-6Al-4V alloy against GCr15 under high speed and dry sliding
Qiu Ming et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)
Titanium alloys for biomedical applications
H. J. Rack et al.
MATERIALS SCIENCE & ENGINEERING C-BIOMIMETIC AND SUPRAMOLECULAR SYSTEMS (2006)
Laser surface modification of Ti-6Al-4V: Wear and corrosion characterization in simulated biofluid
Raghuvir Singh et al.
JOURNAL OF BIOMATERIALS APPLICATIONS (2006)
Investigation of the relationship between the white layer thickness and 3D surface texture parameters in the die sinking EDM process
H Ramasawmy et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2005)
Improvement of wear resistance of Ti-6Al-4V alloy by means of thermal oxidation
F Borgioli et al.
MATERIALS LETTERS (2005)
Surface modification of a Ti-6Al-4V alloy by thermal oxidation
H Guleryuz et al.
SURFACE & COATINGS TECHNOLOGY (2005)
Microstructure analysis of the martensitic stainless steel surface fine-cut by the wire electrode discharge machining (WEDM)
CA Huang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)
The corrosion-wear behaviour of thermally oxidised CP-Ti and Ti-6Al-4V
PA Dearnley et al.
WEAR (2004)
A review on the use of environmentally-friendly dielectric fluids in electrical discharge machining
FN Leao et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2004)
Severe-mild wear transition by supply of oxide particles on sliding surface
H Kato
WEAR (2003)
Behaviour of normal grain growth kinetics in single phase titanium and titanium alloys
FJ Gil et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2000)
Sliding wear behaviour of two gamma-based titanium aluminides
AR Rastkar et al.
WEAR (2000)
Wear of spray deposited Al-6Cu-Mn alloy under dry sliding conditions
MC Gui et al.
WEAR (2000)
分享论文
