Effect and mechanism of reduced membrane bioreactor fouling by powdered activated carbon

Powered Activated Carbon - Membrane Bioreactors (PAC-MBRs) have been used with good results for slightly polluted water treatment. Our batch experiments showed that the transmembrane pressure of a PAC-MBR was 25% less than that of a MBR in one period of test, which indicated that PAC did help control the fouling in MBRs. Based on this observation, several mechanisms of membrane fouling of MBRs and PAC-MBRs were investigated to have some insight into how PAC brought a positive impact. The total resistances decreased by 60% and different resistances were redistributed after adding PAC. The dominant one changed from filtration resistance to cake resistance. These smaller cake resistances resulted from the PAC because, showing in the scanning electron microscopy pictures, it made the cake layer looser and rougher than that on a normal membrane. Meanwhile, the analysis of the membrane eluent showed that the addition of PAC changed the microbial species and its metabolites on the membrane and effectively reduced the adsorption of hydrophilic organic molecules on the membrane surface. Additionally, PAC prevented polypeptide compounds from being trapped inside the pores of membranes, so the cake on the PAC-MBR contaminated membrane surface was easier to scrape off. In the test of cleaning methods, alkaline cleaning removed the most organics from contaminated membranes to restore membrane performance.

Automated summary

PAC-MBRs have shown to reduce transmembrane pressure by 25% compared to MBRs, indicating effective fouling control. Addition of PAC resulted in redistribution of resistances, with the dominant resistance shifting from filtration to cake resistance. Analysis showed that PAC altered microbial species on the membrane and reduced adsorption of organic molecules, making it easier to clean contaminated membranes with alkaline solutions.